Paolo Walter Cattaneo

Development of High Precision Timing Counter Based on Plastic Scintillator with SiPM Readout

High-time-resolution counters based on plastic scintillator with silicon photomultiplier (SiPM) readout have been developed for applications to high energy physics experiments for which relatively large-sized counters are required. We have studied counter sizes up to 120 ×40 ×5 mm3 with series connection of multiple SiPMs to increase the sensitive area and thus achieve better time resolution. A readout scheme with analog shaping and digital waveform analysis is optimized to achieve the highest time resolution. The timing performance is measured using electrons from a 90Sr radioactive source, comparing different scintillators, counter dimensions, and types of near-ultraviolet sensitive SiPMs. As a result, a resolution of σ = 42 ±2 ps at 1 MeV energy deposition is obtained for counter size 60 ×30 ×5 mm3 with three SiPMs ( 3 ×3 mm2 each) at each end of the scintillator. The time resolution improves with the number of photons detected by the SiPMs. The SiPMs from Hamamatsu Photonics give the best time resolution because of their high photon detection efficiency in the near-ultraviolet region. Further improvement is possible by increasing the number of SiPMs attached to the scintillator.

The architecture of MEG simulation and analysis software

Abstract.MEG (

The MEG spectrometer at PSI

mu^{+}_{}

The Timing Counter of the MEG experiment: calibration and performance

rightarrow

MEG simulation and analysis software

e+

Optimal measurement of signal over noise ratio with constrained filter transfer functions

gamma

Noise and signal processing in a microstrip detector with a time variant readout system

is an experiment dedicated to the search for the

The effect of velocity saturation on the shape of current signals in germanium cylindrical detectors

mu^{+}_{}