Patricia Gant

Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres

In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol–gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2 × 10−5 S, which increases up to 8 × 10−5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (responsivity of 90 A W−1 for 375 nm wavelength) and a response time to illumination of ∼5 s, which is superior to state-of-the-art TiO2-based UV photodetectors. Both responsivity and response speed are higher in air than in vacuum, due to oxygen adsorbed on the TiO2 surface which traps photoexcited free electrons in the conduction band, thus reducing the recombination processes. The photodetectors are sensitive to light polarization, with an anisotropy ratio of 12%. These results highlight the interesting combination of large surface area and low 1D transport resistance in electrospun TiO2 fibres. The simplicity of the sol–gel/electrospinning synthesis method, combined with a fast response and high responsivity makes them attractive candidates for UV-photodetection in ambient conditions. We anticipate their high (photo) conductance is also relevant for photocatalysis and dye-sensitized solar cells.

Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials

Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques for studying 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup for carrying out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 µm in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and characterize their fundamental optical properties, such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.

Characterization of highly crystalline lead iodide nanosheets prepared by room-temperature solution processing

Two-dimensional (2D) semiconducting materials are particularly appealing for many applications. Although theory predicts a large number of 2D materials, experimentally only a few of these materials have been identified and characterized comprehensively in the ultrathin limit. Lead iodide, which belongs to the transition metal halides family and has a direct bandgap in the visible spectrum, has been known for a long time and has been well characterized in its bulk form. Nevertheless, studies of this material in the nanometer thickness regime are rather scarce. In this article we demonstrate an easy way to synthesize ultrathin, highly crystalline flakes of PbI2 by precipitation from a solution in water. We thoroughly characterize the produced thin flakes with different techniques ranging from optical and Raman spectroscopy to temperature-dependent photoluminescence and electron microscopy. We compare the results to ab initio calculations of the band structure of the material. Finally, we fabricate photodetectors based on PbI2 and study their optoelectronic properties.Two-dimensional semiconducting materials are particularly appealing for many applications. Although theory predicts a large number of two-dimensional materials, experimentally only a few of these materials have been identified and characterized comprehensively in the ultrathin limit. Lead iodide, which belongs to the transition metal halides family and has a direct bandgap in the visible spectrum, has been known for a long time and has been well characterized in its bulk form. Nevertheless, studies of this material in the nanometer thickness regime are rather scarce. In this article we demonstrate an easy way to synthesize ultrathin, highly crystalline flakes of PbI2 by precipitation from a solution in water. We thoroughly characterize the produced thin flakes with different techniques ranging from optical and Raman spectroscopy to temperature-dependent photoluminescence and electron microscopy. We compare the results to ab initio calculations of the band structure of the material. Finally, we fabricate photodetectors based on PbI2 and study their optoelectronic properties.

Lithography-free electrical transport measurements on 2D materials by direct microprobing

We present a method to carry out electrical and optoelectronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts with the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by the conventional lithographic process. We also show that this method can be used with other 2D materials.

Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite

We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission-mode and epi-illumination-mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite over a broad range of the visible spectrum through a fit of the acquired spectra to a model based on the Fresnel law.

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS2 onto a lanthanum strontium manganite (La0.7Sr0.3MnO3) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 103, and a photovoltaic effect with V oc up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities.

Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2

The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2.

Elucidating the Methylammonium (MA) Conformation in MAPbBr3 Perovskite with Application in Solar Cells

Hybrid organic-inorganic perovskites, MAPbX3 (X = halogen), containing methylammonium (MA: CH3-NH3+) in the large voids conformed by the PbX6 octahedral network, are the active absorption materials in the new generation of solar cells. CH3NH3PbBr3 is a promising member with a large band gap that gives rise to a high open circuit voltage. A deep knowledge of the crystal structure and, in particular, the MA conformation inside the perovskite cage across the phase transitions undergone below room temperature, seems essential to establish structure-property correlations that may drive to further improvements. The presence of protons requires the use of neutrons, combined with synchrotron XRD data that help to depict subtle symmetry changes undergone upon cooling. We present a consistent picture of the structural features of this fascinating material, in complement with photocurrent measurements from a photodetector device, demonstrating the potential of MAPbBr3 in optoelectronics.