Patrick Pütz

Terahertz hot electron bolometer waveguide mixers for GREAT

Supplementing the publications based on the first-light observations with the German Receiver for Astronomy at Terahertz frequencies (GREAT) on SOFIA, we present background information on the underlying heterodyne detector technology. We describe the superconducting hot electron bolometer (HEB) detectors that are used as frequency mixers in the L1 (1400 GHz), L2 (1900 GHz), and M (2500 GHz) channels of GREAT. Measured performance of the detectors is presented and background information on their operation in GREAT is given. Our mixer units are waveguide-based and couple to free-space radiation via a feedhorn antenna. The HEB mixers are designed, fabricated, characterized, and flight-qualified in-house. We are able to use the full intermediate frequency bandwidth of the mixers using silicon-germanium multi-octave cryogenic low-noise amplifiers with very low input return loss. Superconducting HEB mixers have proven to be practical and sensitive detectors for high-resolution THz frequency spectroscopy on SOFIA. We show that our niobium-titanium-nitride (NbTiN) material HEBs on silicon nitride (SiN) membrane substrates have an intermediate frequency (IF) noise roll-off frequency above 2.8 GHz, which does not limit the current receiver IF bandwidth. Our mixer technology development efforts culminate in the first successful operation of a waveguide-based HEB mixer at 2.5 THz and deployment for radioastronomy. A significant contribution to the success of GREAT is made by technological development, thorough characterization and performance optimization of the mixer and its IF interface for receiver operation on SOFIA. In particular, the development of an optimized mixer IF interface contributes to the low passband ripple and excellent stability, which GREAT demonstrated during its initial successful astronomical observation runs.

4.7-THz Superconducting Hot Electron Bolometer Waveguide Mixer

We present the first superconducting hot electron bolometer (HEB) waveguide mixer operating at 4.7 THz. The 5.5-nm-thick, 300-nm-long, and 3600-nm-wide NbN HEB microbridge is integrated into a normal metal (Au) planar circuit on a 2 μm thick silicon substrate. This circuit is integrated in a 24 μm × 48 μm × 21 μm waveguide cavity and a 14 μm × 7 μm × 200 μm substrate channel, which is directly machined into a CuTe alloy block. The power spectrum of the HEB mixer, measured with a Fourier transform spectrometer, is in good agreement with the results of 3-D EM circuit simulation. Measured mixer performance shows a state-of-the-art double sideband noise temperature of 1100 K, averaged over the IF bandwidth of 0.2-3.5 GHz. The 3-dB noise roll-off is 3.5 GHz. This mixer is used in the German REceiver for Astronomy at Terahertz frequencies (GREAT) at the airborne Stratospheric Observatory for Far Infrared Astronomy (SOFIA).

NbTiN Hot Electron Bolometer Waveguide Mixers on

We report on NbTiN hot electron bolometer (HEB) mixer design and fabrication for the 1.4, 1.9 and 2.5 THz frequency bands. The mixers under discussion are our contribution to the multi-band single-pixel receivers of the German Receiver for Astronomy at Terahertz Frequencies (GREAT), which is a first light instrument for the airborne Stratospheric Observatory for Infrared Astronomy (SOFIA), and the focal plane array receiver on the balloon-borne Stratospheric Terahertz Observatory (STO). We measure device noise vs. intermediate frequency (IF) and analyse the receiver system output power stability and IF band ripple with newly developed SiGe low-noise amplifiers from the S. Weinreb group (Caltech). The mixers use waveguide technology with the device coupled to the fundamental waveguide mode via an integrated probe antenna. The device is electrically connected through beam leads, which reliably suspend the 2 μm thin Si3N4 membrane with micrometer mounting precision. Electron beam lithography defines the 400 nm long and 4 nm thick NbTiN microbridges and a novel deep reactive-ion etch is used for shaping of the substrates.

{\rm Si}_{3}{\rm N}_{4}

We present a new multi-pixel high resolution ( R ≳ 10 7 ) spectrometer for the Stratospheric Observatory for Far-Infrared Astronomy (SOFIA). The receiver uses 2 × 7-pixel subarrays in orthogonal polarization, each in an hexagonal array around a central pixel. We present the first results for this new instrument after commissioning campaigns in May and December 2015 and after science observations performed in May 2016. The receiver is designed to ultimately cover the full 1.8−2.5 THz frequency range but in its first implementation, the observing range was limited to observations of the [CII] line at 1.9 THz in 2015 and extended to 1.83−2.07 THz in 2016. The instrument sensitivities are state-of-the-art and the first scientific observations performed shortly after the commissioning confirm that the time efficiency for large scale imaging is improved by more than an order of magnitude as compared to single pixel receivers. An example of large scale mapping around the Horsehead Nebula is presented here illustrating this improvement. The array has been added to SOFIA’s instrument suite already for ongoing observing cycle 4.

Membranes at THz Frequencies

We present the upGREAT THz heterodyne arrays for far-infrared astronomy. The low-frequency array (LFA) is designed to cover the 1.9-2.5 THz range using 2 × 7-pixel waveguide-based HEB mixer arrays in a dual polarization configuration. The high-frequency array (HFA) will perform observations of the [OI] line at ~ 4.745 THz using a 7-pixel waveguide- based HEB mixer array. This paper describes the common design for both arrays, cooled to 4.5 K using closed-cycle pulse tube technology. We then show the laboratory and telescope characterization of the first array with its 14 pixels (LFA), which culminated in the successful commissioning in May 2015 aboard the SOFIA airborne observatory observing the [CII] fine structure transition at 1.9005 THz. This is the first successful demonstration of astronomical observations with a heterodyne focal plane array above 1 THz and is also the first time high-power closed-cycle coolers for temperatures below 4.5 K are operated on an airborne platform.

The upGREAT 1.9 THz multi-pixel high resolution spectrometer for the SOFIA Observatory

We report on the development of SuperCam, a 64 pixel imaging spectrometer designed for operation in the astrophysically important 870 micron atmospheric window. SuperCam will be used to answer fundamental questions about the physics and chemistry of molecular clouds in the Galaxy and their direct relation to star and planet formation. The Supercam key project is a fully sampled Galactic plane survey covering over 500 square degrees of the Galaxy in 12CO(3-2) and 13CO(3-2) with 0.3 km/s velocity resolution.

First Supra-THz Heterodyne Array Receivers for Astronomy With the SOFIA Observatory

We present the recently assembled flight models of the SIS mixer units (MU) for band 2 of the HIFI instrument for the Herschel satellite observatory. Design, device fabrication, most of the mixer hardware fabrication, space-qualification, and final assembly are all realized at KOSMA. Thanks to the modular design RF- and IF-performance of different parts of the MU are tested separately before final assembly. Latest test results show a noise temperature between 80 K in the band centre towards 220 K at the upper band edge at 2.8 K operating temperature. The mixer IF-ripple is below 2 dB over a 4-8 GHz bandwidth including the bias-T which provides a very high EMI and ESD protection. The mixer performance and design are discussed under the aspect of the careful trade off between performance, reliability, timely delivery, and resources.

SuperCam: a 64 pixel heterodyne imaging spectrometer

The 1.1 THz multi-pixel heterodyne receiver will be mounted in the Nasmyth A cabin of the 12 m APEX telescope on the Chajnantor plateau, 5000 meters altitude in northern Chile. The receiver will cover the spectral window of 1000 - 1080 GHz, where important spectral lines like CO 9-8 at 1036.9 GHz, a tracer of warm and dense gas and OH+ at 1033 GHz and NH+ at 1012.6 GHz, both important for the study of chemical networks in the ISM, are located. The multi-pixel receiver greatly enhances the science output under the difficult observing conditions in this frequency range. Two 9-pixel focal plane sub-arrays on orthogonal polarizations are installed in easily removable cartridges. We developed a new thermal link to connect the cartridges to the cryostat. Our thermal link is an all-metal design: aluminum and Invar. All the optics is fully reflective, thus avoiding the absorption and reflection losses of dielectric lenses and reducing standing waves in the receiver. To guaranty internal optics alignment, we employ a monolithic integrated optics approach for the cold optics and the Focal Plane Unit (FPU) optics modeled after the CHARM (Compact Heterodyne Array Receiver Module) concept. The receiver uses synthesizer-driven solid-state local oscillators (LO) and the mixers will be balanced SIS mixers, which are essentially based on the design of the on-chip balanced SIS mixers at 490 GHz developed in our institute. Singleended HEB mixers are used for the laboratory tests of the optics. The LO power distribution is accommodated behind the FPU optics. It is composed of the LO optics, which includes a collimating Fourier grating, and an LO distribution plate to supply LO signal to each of the 9 pixels of the sub-array. Different options for the LO coupling design and fabrication are being analyzed and will be based on in-house hybrid waveguide/planar technology. We summarize the receiver project with emphasis on the cryogenics and the optics and present laboratory test results of the cryogenics, including the thermal links performance. Beam pattern measurements of the receiver optics are scheduled for the coming days, but unfortunately could not be included in the current paper.

SIS flight mixers for band 2 of the HIFI instrument of the Herschel Space Observatory

We report on the development of SuperCam, a 64 pixel, superheterodyne camera designed for operation in the astrophysically important 870 μm atmospheric window. SuperCam will be used to answer fundamental questions about the physics and chemistry of molecular clouds in the Galaxy and their direct relation to star and planet formation. The advent of such a system will provide an order of magnitude increase in mapping speed over what is now available and revolutionize how observational astronomy is performed in this important wavelength regime. Unlike the situation with bolometric detectors, heterodyne receiver systems are coherent, retaining information about both the amplitude and phase of the incident photon stream. From this information a high resolution spectrum of the incident light can be obtained without multiplexing. SuperCam will be constructed by stacking eight, 1×8 rows of fixed tuned, SIS mixers. The IF output of each mixer will be connected to a low-noise, broadband MMIC amplifier integrated into the mixer block. The instantaneous IF bandwidth of each pixel will be ~2 GHz, with a center frequency of 5 GHz. A spectrum of the central 500 MHz of each IF band will be provided by the array spectrometer. Local oscillator power is provided by a frequency multiplier whose output is divided between the pixels by using a matrix of waveguide power dividers. The mixer array will be cooled to 4K by a closed-cycle refrigeration system. SuperCam will reside at the Cassegrain focus of the 10m Heinrich Hertz telescope (HHT). A prototype single row of the array will be tested on the HHT in 2006, with the first engineering run of the full array in late 2007. The array is designed and constructed so that it may be readily scaled to higher frequencies.

Optics and cryogenics for the 1.1 THz multi-pixel heterodyne receiver for APEX

The six papers in this special mini-issue are expanded versions of papers presented at the 24th International Symposium on Space Terahertz Technology, held in Groningen, The Netherlands during April 8-10, 2013.