Patrick T. O'Shaughnessy

Inhalation Exposure Study of Titanium Dioxide Nanoparticles with a Primary Particle Size of 2 to 5 NM

Background Nanotechnology offers great promise in many industrial applications. However, little is known about the health effects of manufactured nanoparticles, the building blocks of nanomaterials. Objectives Titanium dioxide (TiO2) nanoparticles with a primary size of 2–5 nm have not been studied previously in inhalation exposure models and represent some of the smallest manufactured nanoparticles. The purpose of this study was to assess the toxicity of these nanoparticles using a murine model of lung inflammation and injury. Materials and Methods The properties of TiO2 nanoparticles as well as the characteristics of aerosols of these particles were evaluated. Mice were exposed to TiO2 nanoparticles in a whole-body exposure chamber acutely (4 hr) or subacutely (4 hr/day for 10 days). Toxicity in exposed mice was assessed by enumeration of total and differential cells, determination of total protein, lactate dehydrogenase (LDH) activity and inflammatory cytokines in bronchoalveolar lavage (BAL) fluid. Lungs were also evaluated for histopathologic changes Results Mice exposed acutely to 0.77 or 7.22 mg/m3 nanoparticles demonstrated minimal lung toxicity or inflammation. Mice exposed subacutely (8.88 mg/m3) and necropsied immediately and at week 1 or 2 postexposure had higher counts of total cells and alveolar macrophages in the BAL fluid compared with sentinels. However, mice recovered by week 3 postexposure. Other indicators were negative. Conclusions Mice subacutely exposed to 2–5 nm TiO2 nanoparticles showed a significant but moderate inflammatory response among animals at week 0, 1, or 2 after exposure that resolved by week 3 postexposure.

NANOSILVER INDUCES MINIMAL LUNG TOXICITY OR INFLAMMATION IN A SUBACUTE MURINE INHALATION MODEL

BackgroundThere is increasing interest in the environmental and health consequences of silver nanoparticles as the use of this material becomes widespread. Although human exposure to nanosilver is increasing, only a few studies address possible toxic effect of inhaled nanosilver. The objective of this study was to determine whether very small commercially available nanosilver induces pulmonary toxicity in mice following inhalation exposure.ResultsIn this study, mice were exposed sub-acutely by inhalation to well-characterized nanosilver (3.3 mg/m3, 4 hours/day, 10 days, 5 ± 2 nm primary size). Toxicity was assessed by enumeration of total and differential cells, determination of total protein, lactate dehydrogenase activity and inflammatory cytokines in bronchoalveolar lavage fluid. Lungs were evaluated for histopathologic changes and the presence of silver. In contrast to published in vitro studies, minimal inflammatory response or toxicity was found following exposure to nanosilver in our in vivo study. The median retained dose of nanosilver in the lungs measured by inductively coupled plasma - optical emission spectroscopy (ICP-OES) was 31 μg/g lung (dry weight) immediately after the final exposure, 10 μg/g following exposure and a 3-wk rest period and zero in sham-exposed controls. Dissolution studies showed that nanosilver did not dissolve in solutions mimicking the intracellular or extracellular milieu.ConclusionsMice exposed to nanosilver showed minimal pulmonary inflammation or cytotoxicity following sub-acute exposures. However, longer term exposures with higher lung burdens of nanosilver are needed to ensure that there are no chronic effects and to evaluate possible translocation to other organs.

Airborne Monitoring to Distinguish Engineered Nanomaterials from Incidental Particles for Environmental Health and Safety

Two methods were used to distinguish airborne engineered nanomaterials from other airborne particles in a facility that produces nano-structured lithium titanate metal oxide powder. The first method involved off-line analysis of filter samples collected with conventional respirable samplers at each of seven locations (six near production processes and one outdoors). Throughout most of the facility and outdoors, respirable mass concentrations were low (<0.050 mg/m3) and were attributed to particles other than the nanomaterial (<10% by mass titanium determined with inductively coupled plasma atomic emission spectrometry). In contrast, in a single area with extensive material handling, mass concentrations were greatest (0.118 mg m−3) and contained up to 39% ± 11% lithium titanium, indicating the presence of airborne nanomaterial. Analysis of the filter samples collected in this area by transmission electron microscope and scanning electron microscope revealed that the airborne nanomaterial was associated only with spherical aggregates (clusters of fused 10–80 nm nanoparticles) that were larger than 200 nm. This analysis also showed that nanoparticles in this area were the smallest particles of a larger distribution of submicrometer chain agglomerates likely from welding in an adjacent area of the facility. The second method used two, hand-held, direct-reading, battery-operated instruments to obtain a time series of very fine particle number (<300 nm), respirable mass, and total mass concentration, which were then related to activities within the area of extensive material handling. This activity-based monitoring showed that very fine particle number concentrations (<300 nm) had no apparent correlation to worker activities, but that sharp peaks in the respirable and total mass concentration coincided with loading a hopper and replacing nanomaterial collection bags. These findings were consistent with those from the filter-based method in that they demonstrate that airborne nanoparticles in this facility are dominated by “incidental” sources (e.g., welding or grinding), and that the airborne “engineered” product is predominately composed of particles larger than several hundred nanometers. The methods presented here are applicable to any occupational or environmental setting in which one needs to distinguish incidental sources from engineered product.

Mechanisms of asbestos-induced nitric oxide production by rat alveolar macrophages in inhalation and in vitro models.

To evaluate the contribution of reactive nitrogen species to inflammation by asbestos, Fischer 344 rats were exposed to crocidolite or chrysotile asbestos by inhalation to determine whether increases occurred in nitric oxide (NO.) metabolites from alveolar macrophages (AMs). AMs from animals inhaling asbestos showed significant elevations (p < .05) in nitrite/nitrate levels which were ameliorated by NG-monomethyl-L-arginine (NMMA), an inhibitor of inducible nitric oxide synthase (iNOS) activity. Temporal patterns of NO. generation from AMs correlated with neutrophil influx in bronchoalveolar lavage samples after asbestos inhalation or bleomycin instillation, another model of pulmonary fibrosis. To determine the molecular mechanisms and specificity of iNOS promoter activation by asbestos, RAW 264.7 cells, a murine macrophage-like line, and AMs isolated from control rats were exposed to crocidolite asbestos in vitro. These cells showed increases in steady-state levels of iNOS mRNA in response to asbestos and more dramatic increases in both iNOS mRNA and immunoreactive protein after addition of lipopolysaccharide (LPS). After transfection of an iNOS promoter/luciferase reporter construct, RAW 264.7 cells exposed to LPS, crocidolite asbestos and its nonfibrous analog, riebeckite, revealed increases in luciferase activity whereas cristobalite silica had no effects. Studies suggest that NO. generation may be important in cell injury and inflammation by asbestos.

Regional deposition of particles in an image-based airway model: large-eddy simulation and left-right lung ventilation asymmetry.

Regional deposition and ventilation of particles by generation, lobe and lung during steady inhalation in a computed tomography (CT) based human airway model are investigated numerically. The airway model consists of a seven-generation human airway tree, with oral cavity, pharynx, and larynx. The turbulent flow in the upper respiratory tract is simulated by large-eddy simulation. The flow boundary conditions at the peripheral airways are derived from CT images at two lung volumes to produce physiologically realistic regional ventilation. Particles with diameters equal to or greater than 2.5 microns are selected for study because smaller particles tend to penetrate to the more distal parts of the lung. The current generational particle deposition efficiencies agree well with existing measurement data. Generational deposition efficiencies exhibit similar dependence on particle Stokes number regardless of generation, whereas deposition and ventilation efficiencies vary by lobe and lung, depending on airway morphology and airflow ventilation. In particular, regardless of particle size, the left lung receives a greater proportion of the particle bolus as compared to the right lung in spite of greater flow ventilation to the right lung. This observation is supported by the left-right lung asymmetry of particle ventilation observed in medical imaging. It is found that the particle-laden turbulent laryngeal jet flow, coupled with the unique geometrical features of the airway, causes a disproportionate amount of particles to enter the left lung.

Inflammatory response of mice following inhalation exposure to iron and copper nanoparticles

We examined pulmonary inflammatory responses of mice following whole-body inhalation exposure to copper and iron nanoparticles in acute and sub-acute studies. Concentrations for sub-acute copper and iron exposures were 3.6 mg m−3. No significant pathology was found following acute exposure. Immediately following sub-acute exposure, both iron- and copper-exposed mice showed increased inflammation compared to sentinels. Copper nanoparticle-exposed mice had significantly higher lavage cytokines as well as perivasculitis and alveolitis. Three weeks post-exposure, all inflammatory markers decreased for iron nanoparticle-exposed mice, however, some remained elevated for copper-exposed mice. At biologically relevant pHs, in vitro studies showed that copper nanoparticles displayed a greater propensity for dissolution compared to iron. We conclude that the presence of dissolved ions, the concomitant formation of smaller nanoparticles and the absence of particles in stained lung sections immediately postexposure (inferring either translocation or more dispersed aerosol distribution) contributed to the increased inflammation observed in copper nanoparticle-exposed mice.

Modulation of murine allergic rhinosinusitis by CpG oligodeoxynucleotides

Background Allergic rhinosinusitis is characterized by eosinophilic inflammation of the upper airway, which is induced by TH‐2 cytokines. CpG oligodeoxynucleotides (ODN) are known to induce TH‐1 and to suppress TH‐2 cytokines in a variety of settings, including murine models of asthma.

Evaluation of the Limulus Amebocyte Lysate and Recombinant Factor C Assays for Assessment of Airborne Endotoxin

ABSTRACT As a potent inflammatory agent, endotoxin is a key analyte of interest for studies of lung ailments in domestic environments and occupational settings with organic dust. A relatively unexplored advance in endotoxin exposure assessment is the use of recombinant factor C (rFC) from the Limulus pathway in a fluorometric assay. In this study, we compared airborne endotoxin concentrations in laboratory- and field-collected parallel air samples using the kinetic Limulus amebocyte lysate (LAL) assay and the rFC assay. Air sampling was performed using paired Institute of Occupational Medicine (IOM) samplers, Button samplers, closed-face cassettes, and cyclone samplers. Field sampling was performed in 10 livestock production facilities, including those housing swine, chicken, turkey, dairy cows, cattle, and horses. Laboratory sampling was performed in exposure chambers using resuspended airborne dust collected in five livestock facilities. Paired samples were extracted in pyrogen-free water with 0.05% Tween 20 and analyzed using LAL and rFC assays. In 402 field sample pairs there was excellent agreement between endotoxin concentrations determined by LAL and rFC (r = 0.93; P < 0.0001). In 510 laboratory sample pairs there was also excellent agreement between the two assays (r = 0.86; P < 0.0001). Correlations for subgroups of facility or dust type ranged from 0.65 to 0.96. Mixed-model analysis of variance (ANOVA) for the field studies showed significant interactions of facility-sampler and facility-assay. rFC/LAL ratios of the geometric means were 0.9 to 1.14 for the samplers (not significantly different from 1.0). The data from this study demonstrate that the LAL assay and the rFC assay return similar estimates of exposure in livestock facilities. Both methods provided suitable lower limits of detection such that all but 19 of 1,824 samples were quantifiable.

Effects of copper nanoparticle exposure on host defense in a murine pulmonary infection model

BackgroundHuman exposure to nanoparticles (NPs) and environmental bacteria can occur simultaneously. NPs induce inflammatory responses and oxidative stress but may also have immune-suppressive effects, impairing macrophage function and altering epithelial barrier functions. The purpose of this study was to assess the potential pulmonary effects of inhalation and instillation exposure to copper (Cu) NPs using a model of lung inflammation and host defense.MethodsWe used Klebsiella pneumoniae (K.p.) in a murine lung infection model to determine if pulmonary bacterial clearance is enhanced or impaired by Cu NP exposure. Two different exposure modes were tested: sub-acute inhalation (4 hr/day, 5 d/week for 2 weeks, 3.5 mg/m3) and intratracheal instillation (24 hr post-exposure, 3, 35, and 100 μg/mouse). Pulmonary responses were evaluated by lung histopathology plus measurement of differential cell counts, total protein, lactate dehydrogenase (LDH) activity, and inflammatory cytokines in bronchoalveolar lavage (BAL) fluid.ResultsCu NP exposure induced inflammatory responses with increased recruitment of total cells and neutrophils to the lungs as well as increased total protein and LDH activity in BAL fluid. Both inhalation and instillation exposure to Cu NPs significantly decreased the pulmonary clearance of K.p.-exposed mice measured 24 hr after bacterial infection following Cu NP exposure versus sham-exposed mice also challenged with K.p (1.4 × 105 bacteria/mouse).ConclusionsCu NP exposure impaired host defense against bacterial lung infections and induced a dose-dependent decrease in bacterial clearance in which even our lowest dose demonstrated significantly lower clearance than observed in sham-exposed mice. Thus, exposure to Cu NPs may increase the risk of pulmonary infection.

A Task-Specific Assessment of Swine Worker Exposure to Airborne Dust

A task-based analysis of personal airborne dust exposures was performed in two swine confinement facilities used to house sows and their litters. Airborne particulate levels were assessed during summer, winter, and spring. Personal aerosol measurements of workers were made with a photometer every 15 sec and corrected to compare with an integrated concentration measurement made with a co-located IOM inhalable dust sampler. Task type and time period were recorded by the workers over an 8-hr work shift. There was a significant difference in dust concentrations between seasons (p < 0.001), with winter months providing the highest levels (geometric mean = 3.76 mg/m 3 ). The application of a general linear model of log-transformed task concentrations relative to site, season, and task demonstrated significant differences (P < 0.001) among all three covariates. Tasks performed near moving animals, especially the weaning process, resulted in the greatest concentrations. These results indicate the need to evaluate the concentration levels for separate tasks during multi-task work shifts, such as swine rearing, to optimize efforts to minimize exposures by focusing on high-concentration tasks.