Paul P. Woskov

Corrugated waveguide and directional coupler for CW 250-GHz gyrotron DNP experiments

A 250-GHz corrugated transmission line with a directional coupler for forward and backward power monitoring has been constructed and tested for use with a 25-W continuous-wave gyrotron for dynamic nuclear polarization (DNP) experiments. The main corrugated line (22-mm internal diameter, 2.4-m long) connects the gyrotron output to the DNP probe input. The directional coupler, inserted approximately midway, is a four-port crossed waveguide beamsplitter design. Two beamsplitters, a quartz plate and ten-wire array, were tested with output coupling of 2.5% (-16dB) at 250.6 GHz and 1.6% (-18dB), respectively. A pair of mirrors in the DNP probe transferred the gyrotron beam from the 22-mm waveguide to an 8-mm helically corrugated waveguide for transmission through the final 0.58-m distance inside the NMR magnet to the sample. The transmission-line components were all cold tested with a 248/spl plusmn/4-GHz radiometer. A total insertion loss of 0.8 dB was achieved for HE/sub 11/-mode propagation from the gyrotron to the sample with only 1% insertion loss for the 22-mm-diameter waveguide. A clean Gaussian gyrotron beam at the waveguide output and reliable forward power monitoring were achieved for many hours of continuous operation.

Operational characteristics of a 14-W 140-GHz gyrotron for dynamic nuclear polarization

The operating characteristics of a 140-GHz 14-W long pulse gyrotron are presented. The device is being used in dynamic nuclear polarization enhanced nuclear magnetic resonance (DNP/NMR) spectroscopy experiments. The gyrotron yields 14 W peak power at 139.65 GHz from the TE(0,3) operating mode using a 12.3-kV 25-mA electron beam. Additionally, up to 12 W peak has been observed in the TE(2,3) mode at 136.90 GHz. A series of mode converters transform the TE(0,3) operating mode to the TE(1,1) mode. Experimental results are compared with nonlinear simulations and show reasonable agreement. The millimeter-wave output beam was imaged in a single shot using a pyroelectric camera. The mode patterns matched reasonably well to theory for both the TE(0,1) mode and the TE(1,1) mode. Repeatable mode patterns were obtained at intervals ranging from 0.8 s apart to 11 min apart at the output of the final mode converter

Dynamic nuclear polarization at 700 MHz/460 GHz

We describe the design and implementation of the instrumentation required to perform DNP-NMR at higher field strengths than previously demonstrated, and report the first magic-angle spinning (MAS) DNP-NMR experiments performed at (1)H/e(-) frequencies of 700 MHz/460 GHz. The extension of DNP-NMR to 16.4 T has required the development of probe technology, cryogenics, gyrotrons, and microwave transmission lines. The probe contains a 460 GHz microwave channel, with corrugated waveguide, tapers, and miter-bends that couple microwave power to the sample. Experimental efficiency is increased by a cryogenic exchange system for 3.2 mm rotors within the 89 mm bore. Sample temperatures ≤85 K, resulting in improved DNP enhancements, are achieved by a novel heat exchanger design, stainless steel and brass vacuum jacketed transfer lines, and a bronze probe dewar. In addition, the heat exchanger is preceded with a nitrogen drying and generation system in series with a pre-cooling refrigerator. This reduces liquid nitrogen usage from >700 l per day to <200 l per day and allows for continuous (>7 days) cryogenic spinning without detrimental frost or ice formation. Initial enhancements, ε=-40, and a strong microwave power dependence suggests the possibility for considerable improvement. Finally, two-dimensional spectra of a model system demonstrate that the higher field provides excellent resolution, even in a glassy, cryoprotecting matrix.

Microwave Field Distribution in a Magic Angle Spinning Dynamic Nuclear Polarization NMR Probe

We present a calculation of the microwave field distribution in a magic angle spinning (MAS) probe utilized in dynamic nuclear polarization (DNP) experiments. The microwave magnetic field (B(1S)) profile was obtained from simulations performed with the High Frequency Structure Simulator (HFSS) software suite, using a model that includes the launching antenna, the outer Kel-F stator housing coated with Ag, the RF coil, and the 4mm diameter sapphire rotor containing the sample. The predicted average B(1S) field is 13μT/W(1/2), where S denotes the electron spin. For a routinely achievable input power of 5W the corresponding value is γ(S)B(1S)=0.84MHz. The calculations provide insights into the coupling of the microwave power to the sample, including reflections from the RF coil and diffraction of the power transmitted through the coil. The variation of enhancement with rotor wall thickness was also successfully simulated. A second, simplified calculation was performed using a single pass model based on Gaussian beam propagation and Fresnel diffraction. This model provided additional physical insight and was in good agreement with the full HFSS simulation. These calculations indicate approaches to increasing the coupling of the microwave power to the sample, including the use of a converging lens and fine adjustment of the spacing of the windings of the RF coil. The present results should prove useful in optimizing the coupling of microwave power to the sample in future DNP experiments. Finally, the results of the simulation were used to predict the cross effect DNP enhancement (ϵ) vs. ω(1S)/(2π) for a sample of (13)C-urea dissolved in a 60:40 glycerol/water mixture containing the polarizing agent TOTAPOL; very good agreement was obtained between theory and experiment.

Status of the new multi-frequency ECRH system for ASDEX Upgrade

Summary form only given. The first two-frequency GYCOM gyrotron Odissey-1 has been installed and put into operation in the new multi-frequency ECRH system at the ASDEX Upgrade tokamak experiment. It works at 105 GHz and 140GHz with output power 610kW and 820kW respectively at a pulse length of 10s. A further extension of the system with 3 more gyrotrons is underway. These gyrotrons will be step-tunable and operate at two additional intermediate frequencies between 105 and 140GHz. Such gyrotrons will require broadband vacuum windows. Construction and cold tests of a first broadband double-disc toms window are completed. The transmission to the tonis is in normal air, through corrugated aluminum waveguides with I.D.=87mm over a total length of about 70m. Calorimetric measurements gave a total transmission loss of only 12% at 105GHz and 10% at 140GHz. The variable frequency will significantly extend the operating range of the ECRH system, e.g. allow for central heating at different magnetic fields. Other experimental features, like the suppression of neoclassical tearing modes (NTM), require to drive current on the high field side without changing the magnetic field. The stabilization of NTMs requires a very localized power deposition such that its center can be feedback controlled, for instance to keep it on a resonant q-surface. For this reason fast movable launchers have been installed.

Fast-ion redistribution due to sawtooth crash in the TEXTOR tokamak measured by collective Thomson scattering

Here we present collective Thomson scattering measurements of 1D fast-ion velocity distribution functions in neutral beam heated TEXTOR plasmas with sawtooth oscillations. Up to 50% of the fast ions in the centre are redistributed as a consequence of a sawtooth crash. We resolve various directions to the magnetic field. The fast-ion distribution is found to be anisotropic as expected. For a resolved angle of 39? to the magnetic field we find a drop in the fast-ion distribution of 20?40%. For a resolved angle of 83? to the magnetic field the drop is no larger than 20%.

Design of the collective Thomson scattering diagnostic for International Thermonuclear Experimental Reactor at the 60 GHz frequency range

The physics feasibility study [H. Bindslev et al., ITER Report Contract No. EFDA 01.654, 2003, www.risoe.dk/euratom/CTS/ITER] concludes that the frequency option below the electron cyclotron resonance was the only system capable of meeting the International Thermonuclear Experimental Reactor (ITER) measurement requirements for the fusion alphas, with present or near term technology. This article presents the design of the collective Thomson scattering diagnostic for ITER at the 60 GHz range. The system is capable of measuring the fast ion distribution parallel and perpendicular to the magnetic field at different radial locations simultaneously. The design is robust technologically with no moveable components near the plasma. The article includes the upgrade requirements to provide temporally and spatially resolved measurements of the fuel ion ratio.

Microwave plasma continuous emissions monitor for trace‐metals in furnace exhaust

A microwave plasma continuous emissions monitor has been successfully demonstrated for sensitive (<1 ppb), real time measurements of trace metals in furnace exhaust. The instrument uses a robust, up to 1.5 kW, 2.45 GHz microwave plasma sustained in a portion of the undiluted furnace exhaust flow for atomic emission spectroscopy. The waveguide device is constructed of refractory materials compatible with high‐temperature environments (≳500 °C) and is flange mountable into the inside of the furnace exhaust duct. Fused quartz fiber optics in close proximity to the plasma flame transmit the UV through visible emission (190–690 nm) to three spectrometers for simultaneous monitoring of several metals. This instrument has been used for continuous monitoring for a 49 h period with 0.5 s time resolution on a dc graphite electrode arc furnace during a soil vitrification test. Results are presented for chromium, manganese, and iron emissions during soil loading operations.

A 140 GHz pulsed EPR/212 MHz NMR spectrometer for DNP studies

We described a versatile spectrometer designed for the study of dynamic nuclear polarization (DNP) at low temperatures and high fields. The instrument functions both as an NMR spectrometer operating at 212 MHz ((1)H frequency) with DNP capabilities, and as a pulsed-EPR operating at 140 GHz. A coiled TE(011) resonator acts as both an NMR coil and microwave resonator, and a double balanced ((1)H, (13)C) radio frequency circuit greatly stabilizes the NMR performance. A new 140 GHz microwave bridge has also been developed, which utilizes a four-phase network and ELDOR channel at 8.75 GHz, that is then multiplied and mixed to obtain 140 GHz microwave pulses with an output power of 120 mW. Nutation frequencies obtained are as follows: 6 MHz on S=1/2 electron spins, 100 kHz on (1)H, and 50 kHz on (13)C. We demonstrate basic EPR, ELDOR, ENDOR, and DNP experiments here. Our solid effect DNP results demonstrate an enhancement of 144 and sensitivity gain of 310 using OX063 trityl at 80 K and an enhancement of 157 and maximum sensitivity gain of 234 using Gd-DOTA at 20 K, which is significantly better performance than previously reported at high fields (≥3 T).

Fast-ion dynamics in the TEXTOR tokamak measured by collective Thomson scattering

Here we present the first measurements by collective Thomson scattering of the evolution of fast-ion populations in a magnetically confined fusion plasma. 150 kW and 110 Ghz radiation from a gyrotron were scattered in the TEXTOR tokamak plasma with energetic ions generated by neutral beam injection and ion cyclotron resonance heating. The temporal behavior of the spatially resolved fast-ion velocity distribution is inferred from the received scattered radiation. The fast-ion dynamics at sawteeth and the slowdown after switch off of auxiliary heating is resolved in time. The latter is shown to be in close agreement with modeling results.