Paul Pop

Timing analysis of the FlexRay communication protocol

FlexRay will very likely become the de-facto standard for in-vehicle communications. However, before it can be successfully used for safety-critical applications that require predictability, timing analysis techniques are necessary for providing bounds for the message communication times. In this paper, we propose techniques for determining the timing properties of messages transmitted in both the static (ST) and the dynamic (DYN) segments of a FlexRay communication cycle. The analysis techniques for messages are integrated in the context of a holistic schedulability analysis that computes the worst-case response times of all the tasks and messages in the system. We have evaluated the proposed analysis techniques using extensive experiments.

Scheduling of conditional process graphs for the synthesis of embedded systems

We present an approach to process scheduling based on an abstract graph representation which captures both dataflow and the flow of control. Target architectures consist of several processors, ASICs and shared busses. We have developed a heuristic which generates a schedule table so that the worst case delay is minimized. Several experiments demonstrate the efficiency of the approach.

Scheduling with bus access optimization for distributed embedded systems

In this paper, we concentrate on aspects related to the synthesis of distributed embedded systems consisting of programmable processors and application-specific hardware components. The approach is based on an abstract graph representation that captures, at process level, both dataflow and the flow of control. Our goal is to derive a worst case delay by which the system completes execution, such that this delay is as small as possible; to generate a logically and temporally deterministic schedule; and to optimize parameters of the communication protocol such that this delay is guaranteed. We have further investigated the impact of particular communication infrastructures and protocols on the overall performance and, specially, how the requirements of such an infrastructure have to be considered for process and communication scheduling. Not only do particularities of the underlying architecture have to be considered during scheduling but also the parameters of the communication protocol should be adapted to fit the particular embedded application. The optimization algorithm, which implies both process scheduling and optimization of the parameters related to the communication protocol, generates an efficient bus access scheme as well as the schedule tables for activation of processes and communications.

Design Optimization of Time-and Cost-Constrained Fault-Tolerant Distributed Embedded Systems

In this paper we present an approach to the design optimization of fault tolerant embedded systems for safety-critical applications. Processes are statically scheduled and communications are performed using the time-triggered protocol. We use process re-execution and replication for tolerating transient faults. Our design optimization approach decides the mapping of processes to processors and the assignment of fault-tolerant policies to processes such that transient faults are tolerated and the timing constraints of the application are satisfied. We present several heuristics which are able to find fault-tolerant implementations given a limited amount of resources. The developed algorithms are evaluated using extensive experiments, including a real-life example.

Scheduling and voltage scaling for energy/reliability trade-offs in fault-tolerant time-triggered embedded systems

In this paper we present an approach to the scheduling and voltage scaling of low-power fault-tolerant hard real-time applications mapped on distributed heterogeneous embedded systems. Processes and messages are statically scheduled, and we use process re-execution for recovering from multiple transient faults. Addressing simultaneously energy and reliability is especially challenging because lowering the voltage to reduce the energy consumption has been shown to increase the transient fault rates. In addition, time-redundancy based fault-tolerance techniques such as re-execution and dynamic voltage scaling-based low-power techniques are competing for the slack in the schedules. Our approach decides the voltage levels and start times of processes and the transmission times of messages, such that the transient faults are tolerated, the timing constraints of the application are satisfied and the energy is minimized. We present a constraint logic programming-based approach which is able to find reliable and schedulable implementations within limited energy and hardware resources.

Design Optimization of Time- and Cost-Constrained Fault-Tolerant Embedded Systems With Checkpointing and Replication

We present an approach to the synthesis of fault-tolerant hard real-time systems for safety-critical applications. We use checkpointing with rollback recovery and active replication for tolerating transient faults. Processes and communications are statically scheduled. Our synthesis approach decides the assignment of fault-tolerance policies to processes, the optimal placement of checkpoints and the mapping of processes to processors such that multiple transient faults are tolerated and the timing constraints of the application are satisfied. We present several design optimization approaches which are able to find fault-tolerant implementations given a limited amount of resources. The developed algorithms are evaluated using extensive experiments, including a real-life example.

Schedulability-Driven Communication Synthesis for Time Triggered Embedded Systems

We present an approach to static priority preemptive process scheduling for the synthesis of hard real-time distributed embedded systems where communication plays an important role. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays with four different message scheduling policies over a time-triggered communication channel. Optimization strategies for the synthesis of communication are developed, and the four approaches to message scheduling are compared using extensive experiments.

Analysis and optimization of distributed real-time embedded systems

An increasing number of real-time applications are today implemented using distributed heterogeneous architectures composed of interconnected networks of processors. The systems are heterogeneous not only in terms of hardware and software components, but also in terms of communication protocols and scheduling policies. In this context, the task of designing such systems is becoming increasingly difficult. The success of new adequate design methods depends on the availability of efficient analysis as well as optimization techniques. In this article, we present both analysis and optimization approaches for such heterogeneous distributed real-time embedded systems. More specifically, we discuss the schedulability analysis of hard real-time systems, highlighting particular aspects related to the heterogeneous and distributed nature of the applications. We also introduce several design optimization problems characteristic of this class of systems: mapping of functionality, the optimization of access to communication channel, and the assignment of scheduling policies to processes. Optimization heuristics aiming at producing a schedulable system with a given amount of resources are presented.

Bus access optimization for distributed embedded systems based on schedulability analysis

We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different message scheduling policies over a time-triggered communication channel. Optimization strategies for the bus access scheme are developed, and the four approaches to message scheduling are compared using extensive experiments.

Design Optimization of Mixed-Criticality Real-Time Applications on Cost-Constrained Partitioned Architectures

In this paper we are interested to implement mixed-criticality hard real-time applications on a given heterogeneous distributed architecture. Applications have different criticality levels, captured by their Safety-Integrity Level (SIL), and are scheduled using static-cyclic scheduling. Mixed-criticality tasks can be integrated onto the same architecture only if there is enough spatial and temporal separation among them. We consider that the separation is provided by partitioning, such that applications run in separate partitions, and each partition is allocated several time slots on a processor. Tasks of different SILs can share a partition only if they are all elevated to the highest SIL among them. Such elevation leads to increased development costs. We are interested to determine (i) the mapping of tasks to processors, (ii) the assignment of tasks to partitions, (iii) the sequence and size of the time slots on each processor and (iv) the schedule tables, such that all the applications are schedulable and the development costs are minimized. We have proposed a Tabu Search-based approach to solve this optimization problem. The proposed algorithm has been evaluated using several synthetic and real-life benchmarks.