Paul T. Charles

Mesoporous Silicate Materials in Sensing

Mesoporous silicas, especially those exhibiting ordered pore systems and uniform pore diameters, have shown great potential for sensing applications in recent years. Morphological control grants them versatility in the method of deployment whether as bulk powders, monoliths, thin films, or embedded in coatings. High surface areas and pore sizes greater than 2 nm make them effective as adsorbent coatings for humidity sensors. The pore networks also provide the potential for immobilization of enzymes within the materials. Functionalization of materials by silane grafting or through co-condensation of silicate precursors can be used to provide mesoporous materials with a variety of fluorescent probes as well as surface properties that aid in selective detection of specific analytes. This review will illustrate how mesoporous silicas have been applied to sensing changes in relative humidity, changes in pH, metal cations, toxic industrial compounds, volatile organic compounds, small molecules and ions, nitroenergetic compounds, and biologically relevant molecules.

A continuous flow immunoassay for rapid and sensitive detection of small molecules

An immunosensor operating in continuous flow and capable of detecting low molecular weight antigens is described. The approach differs from previously described continuous flow assays by not requiring incubation steps or the introduction of additional reagents following the loading of the sample into the system. Detection of the antigen is rapid, occurring within 3 min in the system described. The assay is based on the binding of labeled antigen to an immobilized antibody, with subsequent displacement of the labeled antigen when antigen is present in the buffer flow. Signal detection occurs downstream of the antigen recognition event. In this study, the hapten 2,4-dinitrophenol (DNP) as DNP-lysine was used as model antigen. To generate a labeled antigen, DNP was coupled to the terminal amino group of insulin A chain (tetra S-sulfonate form) which provides two tyrosine residues for the introduction of an 125I-label (DNP-Ins-125I) or three carboxyl groups for the attachment of three fluorescein residues (DNP-Ins-Fl). The radiolabeled antigen was used to establish assay conditions. Subsequently, fluorescein was substituted for the radioisotope label in order to develop an assay independent of the restrictions associated with isotopes. Using this flow immunoassay, we were able to detect DNP-lysine down to a detection limit of 143 nM (29 pmol/200 microliters) using DNP-Ins-125I or DNP-Ins-Fl as labeled antigen. The density of immobilized antibody and the flow rate were identified to be critical parameters for the sensitivity of the assay.

Nanoporous Organosilicas as Preconcentration Materials for the Electrochemical Detection of Trinitrotoluene

We describe the use of nanoporous organosilicas for rapid preconcentration and extraction of trinitrotoluene (TNT) for electrochemical analysis and demonstrate the effect of template-directed molecular imprinting on TNT adsorption. The relative effects of the benzene (BENZ)- and diethylbenzene (DEB)-bridged organic-inorganic polymers, having narrow or broad pore size distributions, respectively, on electrochemical response and desorption behavior were examined. Sample volumes of 0.5-10 mL containing 5-1000 ppb TNT in a phosphate-buffered saline buffer were preconcentrated in-line before the detector using a microcolumn containing 10 mg of imprinted BENZ or DEB. Square-wave voltammetry was used to detect the first reduction peak of TNT in an electrochemical flow cell using a carbon working electrode and a Ag/AgCl reference electrode. Imprinted BENZ released TNT faster than imprinted DEB with considerably less peak tailing and displayed enhanced sensitivity and an improvement in the limit of detection (LOD) owing to more rapid elution of TNT from that material with increasing signal amplitude. For imprinted BENZ, the slope of signal versus concentration scaled linearly with increasing preconcentration volume, and for preconcentrating 10 mL of sample, the LOD for TNT was estimated to be 5 ppb. Template-directed molecularly imprinted DEB (TDMI-DEB) was 7-fold more efficient in adsorption of TNT from aqueous contaminated soil extract than nonimprinted DEB.

Selection of phage displayed peptides for the detection of 2,4,6-trinitrotoluene in seawater

Abstract We have selected for phage displayed peptides that showed specific binding to a 2,4,6-trinitrotoluene (TNT) derivative, 2,4,6-trinitrobenzene (TNB) in environmentally relevant conditions, and have integrated the selected phage into a continuous flow immunosensor platform for the detection of TNT. A library of 12 random amino acid peptides (12-mers) displayed on phage was panned against TNB coupled to the protein bovine serum albumin (BSA) in a solution of artificial seawater. Eight phage clones, seven of which share an identical amino acid sequence, bound selectively to TNB–BSA in artificial seawater as judged by enzyme-linked immunosorbent assay (ELISA). Addition of TNT, inhibited binding of the phage. Whole phage were labeled with the dye cyanine 5 (Cy5), and incorporated into a flow sensor platform. Labeled phage were loaded onto a TNB–affi-gel packed column, and a reproducible signal, at least five times greater than background, was observed on repeat injections of 10xa0mg/l TNT dissolved in seawater. This study presents one of the first examples of phage selection in a non-physiological medium, and the first demonstration that dye-labeled phage can be integrated into a continuous flow sensor.

Reduction of Non-Specific Protein Adsorption Using Poly(ethylene) Glycol (PEG) Modified Polyacrylate Hydrogels In Immunoassays for Staphylococcal Enterotoxin B Detection

Three PEG molecules (PEG-methacrylate, -diacrylate and -dimethacrylate) were incorporated into galactose-based polyacrylate hydrogels and their relative abilities to reduce non-specific protein adsorption in immunoassays were determined. Highly crosslinked hydrogels containing amine-terminated functionalities were formed and used to covalently attach antibodies specific for staphylococcal enterotoxin B (SEB). Patterned arrays of immobilized antibodies in the PEG-modified hydrogels were created with a PDMS template containing micro-channels for use in sandwich immunoassays to detect SEB. Different concentrations of the toxin were applied to the hydrogel arrays, followed with a Cy3-labeled tracer antibody specific for the two toxins. Fluorescence laser scanning confocal microscopy of the tracer molecules provided both qualitative and quantitative measurements on the detection sensitivity and the reduction in non-specific binding as a result of PEG incorporation. Results showed the PEG-modified hydrogel significantly reduced non-specific protein binding with a detection limit for SEB of 1 ng/mL. Fluorescence signals showed a 10-fold decrease in the non-specific binding and a 6-fold increase in specific binding of SEB.

Detection of 2,4,6-trinitrotoluene in seawater using a reversed-displacement immunosensor

Reported in this study are the experimental design and results of an immunosensor for the detection of the explosive, 2,4,6-trinitrotoluene (TNT) in seawater using a reversed-displacement format. This reversed-displacement immunosensor methodology has successfully measured TNT in seawater by direct injection, eliminating the need for preconcentration or pretreatment of samples. A microcolumn containing an Affi-Gel resin derivatized with a 2,4,6-trinitrobenzene (TNB) moiety and a fluorophore-labeled anti-TNT antibody composed the immunoassay reactive chamber. Fluorophore-labeled anti-TNT antibody was incubated with the modified Affi-Gel resin until binding equilibrium was reached. Under a constant flow, samples containing TNT were introduced into the flow stream displacing the fluorophore-labeled TNT antibody. Limits of detection were 2.5ng/mL or part-per-billion (ppb) for TNT in saline buffer and 25ppb in seawater with an analysis time of 10 min. Two anti-TNT antibodies with differing binding affinities were compared in the reversed-displacement assay format, and a correlation between affinity and detection limits was observed. Furthermore, we have demonstrated that the reversed-displacement format can be used to screen seawater samples containing TNT, remains effective after dozens of cycles, and provides significant fluorescence response before regeneration is required.

Trace level detection of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by microimmunosensor☆

Reported in this paper is the development and characterization of a highly sensitive microcapillary immunosensor for the detection of the explosive, hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). The immunosensor exploits antibodies as recognition elements for target antigens, fluorescence dye conjugates for reporter molecules and fused silica microcapillaries for its high surface-to-volume ratio. Detection of RDX with the microcapillary immunosensor requires covalent immobilization of anti-RDX antibodies on the inner core of the microcapillaries via heterobifunctional cross-linker chemistry. Subsequent saturation of all antibody binding domains follows with a synthetically prepared fluorescent analog of RDX. Displacement immunoassays were performed with the microcapillary immunosensor with the injection of unlabeled RDX at concentration levels from 1 part-per-trillion (pptr) to 1000 part-per-billion (ppb). As unlabeled RDX reaches the binding domain of the antibody, fluorescent RDX analog is displaced from the antibody, flows downstream and is measured by a spectrofluorometer. Fluorescence measurements of the displaced fluorescent RDX analog were equated to a standard calibration curve to quantify sample concentration. Complete evaluation of the RDX microcapillary immunosensor for selectivity and sensitivity was performed based on the following criteria: variable flow rates, antibody cross-reactivity, reproducibility and cross-linker (carbon spacer) comparison. Results indicate the lowest detectable limit (LDL) for RDX is 10 pptr (ng/l) with a linear dynamic range from 0.1 to 1000 ppb (ug/l).

Explosives detection in soil using a field-portable continuous flow immunosensor

A field method for quantitative analysis of explosives in contaminated soil samples is described. The method is based on a displacement immunoassay performed in a commercial instrument, the FAST 2000, engineered by Research International Inc. The method can be used on-site to measure 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) within 5min. For this study, replicate analyses were performed on soil extracts prepared from each field sample as well as appropriate controls, blanks, and laboratory standards. Statistical analyses were done to assess accuracy, bias, and predictability of the method. The results demonstrated that the immunosensor could be used effectively to screen environmental samples for the presence or absence of explosives. In most samples, the method also provided quantitative values that were in good agreement with standard laboratory analyses using HPLC. A limited number of sample matrices interfered with the immunoassay and produced results that varied significantly from the laboratory data. In each case, the compounds causing the problem have been identified and efforts are being made to minimize these matrix interferences in future field evaluations.

Imprinted Nanoporous Organosilicas for Selective Adsorption of Nitroenergetic Targets

Periodic mesoporous organosilicas incorporating diethylbenzene bridges in their pore walls were applied for the adsorption of nitroenegetic targets from aqueous solution. The materials were synthesized by co-condensing 1,4-bis(trimethoxysilylethyl)benzene (DEB) with 1,2-bis(trimethoxysilyl)ethane to improve structural characteristics. Molecular imprinting of the pore surfaces was employed through the use of a novel target-like surfactant to further enhance selectivity for targets of interest (tri- and dinitrotoluenes) over targets of similar structure ( p-cresol and p-nitrophenol). The headgroup of the commonly used alkylene oxide surfactant Brij76 was modified by esterification with 3,5-dinitrobenzoyl chloride. This provided a target analogue which was readily miscible with the Brij76 surfactant micelles used to direct material mesopore structures. The impact of variations in precursor ratios and amounts of imprint molecule was evaluated. The use of 12.5% of the modified Brij surfactant with a co-condensate employing 30% DEB was found to provide the best compromise between total capacity and selectivity for nitroenergetic targets.

Fluorescent Silicate Materials for the Detection of Paraoxon

Porphyrins are a family of highly conjugated molecules that strongly absorb visible light and fluoresce intensely. These molecules are sensitive to changes in their immediate environment and have been widely described for optical detection applications. Surfactant-templated organosilicate materials have been described for the semi-selective adsorption of small molecule contaminants. These structures offer high surface areas and large pore volumes within an organized framework. The organic bridging groups in the materials can be altered to provide varied binding characteristics. This effort seeks to utilize the tunable binding selectivity, high surface area, and low materials density of these highly ordered pore networks and to combine them with the unique spectrophotometric properties of porphyrins. In the porphyrin-embedded materials (PEMs), the organosilicate scaffold stabilizes the porphyrin and facilitates optimal orientation of porphyrin and target. The materials can be stored under ambient conditions and offer exceptional shelf-life. Here, we report on the design of PEMs with specificity for organophosphates and compounds of similar structure.