Paul V. Hatton

An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering

Poly(lactic-co-glycolic) acid (PLGA) has attracted considerable interest as a base material for biomedical applications due to its: (i) biocompatibility; (ii) tailored biodegradation rate (depending on the molecular weight and copolymer ratio); (iii) approval for clinical use in humans by the U.S. Food and Drug Administration (FDA); (iv) potential to modify surface properties to provide better interaction with biological materials; and (v) suitability for export to countries and cultures where implantation of animal-derived products is unpopular. This paper critically reviews the scientific challenge of manufacturing PLGA-based materials with suitable properties and shapes for specific biomedical applications, with special emphasis on bone tissue engineering. The analysis of the state of the art in the field reveals the presence of current innovative techniques for scaffolds and material manufacturing that are currently opening the way to prepare biomimetic PLGA substrates able to modulate cell interaction for improved substitution, restoration, or enhancement of bone tissue function.

Localization of zinc and cadmium in Thlaspi caerulescens (Brassicaceae), a metallophyte that can hyperaccumulate both metals

Summary The compartmentation of Zn and Cd in roots of Thlaspi caerulescens J. & C. Presl, a metallophyte that hyperaccumulates both metals, was investigated by means of EDAX. Two methods for sample preparation, Na 2 S-fixation and freeze-substitution, were compared. Na 2 S-fixation was not suitable for preventing the loss of metal ions from the samples. According to our results from freeze-substituted samples, Cd accumulated mainly in the apoplast and, to a lesser extent, in vacuoles, whereas Zn was principally found in vacuoles and, to a lesser extent, in cell walls.

Synovial fluid mesenchymal stem cells in health and early osteoarthritis: Detection and functional evaluation at the single‐cell level

OBJECTIVE Arthritic synovial fluid (SF) contains mesenchymal stem cells (MSCs), which could simply reflect their shedding from diseased joint structures. This study used the bovine model to explore SF MSCs in health and enumerated them at the earliest stages of human osteoarthritis (OA) in radiographically normal joints. METHODS Clonogenicity and multipotentiality of normal bovine SF MSCs were compared with donor-matched bone marrow (BM) MSCs at the single-cell level. The colony-forming unit-fibroblastic assay was used for MSC enumeration. The XTT assay was employed to assess cell proliferation, and flow cytometry was used to investigate the marker phenotype of bovine and human SF MSCs. RESULTS Single MSCs were present in normal bovine SF, and 96% of them were able to expand at least 1 million-fold. These cells were CD271-, multipotential, considerably more clonogenic, and less adipogenic than matched BM MSCs. In both pellet assays and on polyglycolic acid scaffolds, SF clones displayed consistent chondrogenic differentiation, while BM clones were variable. MSCs were present in arthroscopically normal human joints and were increased 7-fold in early OA (P = 0.034). Their numbers correlated with numbers of free microscopic synovial tissue fragments (r = 0.826, P < 0.0001). OA SF had a growth-promoting effect on synovial MSCs. CONCLUSION This study confirms the presence of MSCs in normal SF and shows their numerical increase in early human OA. SF MSCs are likely to originate from synovium. These findings provide a platform for the exploration of the potential role of SF MSCs in joint homeostasis and for investigation of their utility in novel joint regeneration strategies.

Influence of sodium oxide content on bioactive glass properties

The rate of in vivo degradation and level of bioactivity of bioactive glasses are composition dependent [1]. By altering bioactive glass composition, the rate of resorption can be controlled. The network connectivity of a glass can be used to predict various physical properties of the glass including its solubility and, hence, its bioactivity [2]. Glass solubility increases as network connectivity is reduced. Glasses in the soda-lime phosphosilicate system were studied. The initial choice of composition was based on phosphate content and low network connectivity. A systematic substitution of calcium oxide for sodium oxide on a molar basis was made in order to examine the influence of sodium oxide content on the glass properties while keeping the network connectivity constant. The glass transition temperature and the peak crystallization temperature were seen to decrease linearly with increasing sodium oxide content. Thermal expansion coefficient and glass density were also seen to be related to sodium oxide content. Preliminary in vitro biocompatibility studies revealed that the glasses of higher sodium oxide content were associated with a cytotoxic response. The measurement of media pH indicated that this cytotoxic effect was due to ion exchange reactions at the glass surface.

Skeletal tissue engineering using silk biomaterials

Silks have been proposed as potential scaffold materials for tissue engineering, mainly because of their physical properties. They are stable at physiological temperatures, flexible and resist tensile and compressive forces. Bombyx mori (silkworm) cocoon silk has been used as a suture material for over a century, and has proved to be biocompatible once the immunogenic sericin coating is removed. Spider silks have a similar structure to silkworm silk but do not have a sericin coating. This paper provides a general overview on the use of silk protein in biomaterials, with a focus on skeletal tissue engineering. Copyright

CHARACTERISATION OF THE ULTRASTRUCTURE OF GLASS-IONOMER (POLY-ALKENOATE) CEMENT

Set glass-ionomer cements were sectioned with a diamond knife and examined in the transmission electron microscope. Their appearance was in accordance with the theoretical structure of these materials, close examination revealing glass particles surrounded by a siliceous layer set in a hydrogel matrix. The elemental composition of each region was determined by X-ray microanalysis (energy dispersive). The results of microanalysis supported the ultrastructural observations, with ions that originated from the glass particles being detected throughout the matrix of the set cement. It was suggested that the mobility of these ions in the matrix phase was important in determining the biocompatibility and adhesive properties of glass-ionomer cements

Synthetic implant surfaces. 1. The formation and characterization of sol-gel titania films.

Sol-gel has been used to prepare thin titania films. We have investigated the effects of dip rate, sintering temperature and time on the chemical composition of the films, their physical structure and thickness, and adherence to a silica substrate. Our aim has been to produce films that mimic as closely as possible the natural oxide layer that is found on titanium. These films are to be used as substrates in an in vitro model of osseointegration.

Evaluation of extracellular matrix formation in polycaprolactone and starch-compounded polycaprolactone nanofiber meshes when seeded with bovine articular chondrocytes

Cartilage defects are a major health problem. Tissue engineering has developed different strategies and several biomaterial morphologies, including natural-based ones, for repairing these defects. We used electrospun polycaprolactone (PCL) and starch-compounded PCL (SPCL) nanofiber meshes to evaluate extracellular matrix (ECM) formation by bovine articular chondrocytes (BACs). The main aim of this work was to evaluate the suitability of PCL and SPCL nanofiber meshes in chondrocyte cultures, and their capability to produce ECM when seeded onto these nanostructured materials. The effect of culture conditions (static vs dynamic) on ECM formation was also assessed. BACs were seeded onto PCL and SPCL nanofiber meshes using a dynamic cell-seeding procedure and cultured under static or dynamic conditions for 4 weeks. Constructs were characterized using scanning electron microscopy, histology, immunolocalization of collagen types I and II, and glycosaminoglycan (GAG) quantification. Results show an extensive cell colonization of the entire nanofiber mesh, for both materials, and that chondrocytes presented typical spherical morphology. Some degree of cell infiltration inside the nanofiber meshes was noticeable for both materials. ECM formation and GAG were detected throughout the materials, evidencing typical construct maturation. PCL and SPCL nanofiber meshes are suitable as supports for ECM formation and therefore are adequate for cartilage tissue-engineering approaches.

Extracellular ATP and UTP stimulate cartilage proteoglycan and collagen accumulation in bovine articular chondrocyte pellet cultures

Bovine articular chondrocytes were maintained in high density pellet cultures with and without serum and nucleotide triphosphates for different periods of time. Despite half-lives in culture of about 3 h, adenosine triphosphate and uridine triphosphate in the presence of serum increased sulphated glycosaminoglycan and collagen deposition above control levels. In the presence of serum a single dose of uridine triphosphate on the first day of culture was sufficient to induce significant increases in subsequent proteoglycan and collagen deposition. We conclude that both adenine triphosphate and uridine triphosphate are anabolic for articular chondrocytes, and that this effect on the chondrocyte is long-term.

Dental materials: 1997 literature review

This review of the published literature on dental materials for the year 1997 has been compiled by the Dental Materials Panel of UK. It continues a series of annual reviews started in 1973. Emphasis has been placed upon publications, which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, ceramometallic restorations and resin-bonded bridges, ceramics, denture base resins and soft lining materials, impression materials, dental implant materials, orthodontic materials, biomechanics and image processing, resin composites, and casting investment materials and waxes). Three hundred and thirty three articles have been reviewed.