Paulina Nowicka-Krawczyk

Abiotic Determinants of the Historical Buildings Biodeterioration in the Former Auschwitz II – Birkenau Concentration and Extermination Camp

The paper presents the results of a study conducted at the Auschwitz-Birkenau State Museum in Oświęcim on the occurrence of biodeterioration. Visual assessment of the buildings revealed signs of deterioration of the buildings in the form of dampness, bulging and crumbling plaster, and wood fiber splitting. The external surfaces, and especially the concrete strips and ground immediately adjoining the buildings, were colonized by bryophytes, lichens, and algae. These organisms developed most intensively close to the ground on the northern sides of the buildings. Inside the buildings, molds and bacteria were not found to develop actively, while algae and wood-decaying fungi occurred locally. The factors conducive to biological corrosion in the studied buildings were excessive dampness of structural partitions close to the ground and a relative air humidity of above 70%, which was connected to ineffective moisture insulation. The influence of temperature was smaller, as it mostly affected the quantitative composition of the microorganisms and the qualitative composition of the algae. Also the impact of light was not very strong, but it was conducive to algae growth.

Diversity of an aerial phototrophic coating of historic buildings in the former Auschwitz II-Birkenau concentration camp.

Aerial phototrophs colonize materials of anthropogenic origin, thus contributing to their biodeterioration. Structures preserved at the former Auschwitz II-Birkenau concentration and extermination camp show signs of degradation by cyanobacteria and algae. In order to protect the Auschwitz-Birkenau Memorial Site, diversity of aerial phototrophs growing on the historic buildings has been studied. Analyses of cyanobacterial and algal biofilms growing on various construction substrates were carried out in summer and winter. Multivariate data analyses were used to: characterize the diversity of cyanobacteria and algae growing in brick and wooden camp buildings depending on the research season, indicate preferences of cyanobacteria and algae in colonizing substrates, and to predict the environmental factor that most determines the growth of phototrophs. The biofilms were formed mainly by cyanobacteria, green algae and diatoms. The amount of cyanobacteria and algae in the biofilms was varied, which resulted from changes in climatic conditions, the type of substrate and the height at which the biofilms developed. In the summer, the ratio of cyanobacteria and algae groups was balanced, while in the winter, green algae and diatoms were dominant. Green algae showed a preference for colonizing plaster, wood and concrete, of which the walls and doors of the buildings were made. Their participation was correlated with a height gradient. Cyanobacteria and diatoms grew on bricks and soil on the floor of the buildings and temperature and relative humidity were the factors that modified their amount. Green algae were more cosmopolitan-occurred in dry places, potentially inaccessible to other organisms; therefore, they have been identified as the pioneer group in the prevailing climatic conditions.

Quaternary ammonium biocides as antimicrobial agents protecting historical wood and brick

Quaternary ammonium compounds (QACs) are widely used in disinfection of water, surfaces and instruments as well as in textile, leather and food industries because of their relatively low toxicity, broad antimicrobial spectrum, non-volatility and chemical stability. Due to these advantages, QACs are also used in restoration and can be applied on historical material. The aim of this study was to determine the usefulness of biocides based on quaternary ammonium salts and containing various excipients in the protection of historical materials against microbial growth. The study determined the antimicrobial activity of three biocides against bacteria: Pseudomonas fluorescens, Staphylococcus equorum, Bacillus cereus, Bacillus muralis, Sporosarcina aquimarina and Rhodococcus fascians, and moulds: Chaetomium globosum, Penicillium citreonigrum, Cladosporium cladosporioides I, Acremonium strictum, Aspergillus fumigatus and Cladosporium cladosporioides II, all isolated from historical wood and brick. Staphylococcus equorum, Bacillus cereus, Sporosarcina aquimarina and Rhodococcus fascians bacteria, and Cladosporium cladosporioides I and Acremonium strictum moulds showed high sensitivity to quaternary ammonium biocides. Historical wood can be effectively disinfected by three applications of biocide A (30% v/v) containing dodecyl dimethyl ammonium chloride (DDAC), citric acid, propiconazole and propanol. Disinfection of historical brick can be carried out by three applications of 6% v/v solutions of biocide B (based on DDAC and ethylenediaminetetraacetic acid - EDTA) or biocide C (containing a non-ionic surfactant, DDAC and EDTA). Effective protection of historical building materials against microbial growth for a period of seven days can be achieved by the application of biocide A (30% v/v) on the wood surface and biocide B (6% v/v) on the brick surface.

The cascade construction of artificial ponds as a tool for urban stream restoration — The use of benthic diatoms to assess the effects of restoration practices

A series of cascade artificial ponds were constructed to improve the ecological status of the stream. To evaluate the effects of restoration practices, a bioassessment, based on phytobenthic algae - the diatoms, was made. Hierarchical Cluster Analysis (HCA) and Principal Component Analysis (PCA) of diatom assemblages allowed for evaluating the influence of a series of cascade artificial ponds on stream integrity. To reveal which environmental factors had the greatest influence on shaping diatom assemblages, the BIO-ENV procedure was used, and in order to examine whether these factors had equal influence on diatoms along the stream, Redundancy Analysis (RDA) was used. The analysis of diatom assemblages allowed for the calculation of the diatom indices in order to assess the water quality and the ecological status of the stream. Artificial ponds constructed on the stream had significant effects on the integrity of the stream ecosystem. Diatom assemblages characteristic of stream habitats were disrupted by the species from ponds. HCA and PCA revealed that the stream was clearly divided into three sections: ponds, stream parts under the influence of ponds, and stream parts isolated from ponds. The ponds thus altered stream environmental conditions. Benthic diatom assemblages were affected by a combination of four environmental factors: the concentration of ammonium ions, dissolved oxygen, conductivity, and the amount of total suspended material in the water. These factors, together with water pH, had a diverse influence on diatom assemblages alongside the stream, which was caused by a series of cascade ponds. In theory, this restoration practice should restore the stream close to its natural state, but bioassessment of the stream ecosystem based on diatoms revealed that there was no improvement of the ecological status alongside the stream. The construction of artificial ponds disrupted stream continuity and altered the character of the stream ecosystem.

Half a century of research on diatoms in athalassic habitats in Central Poland

Abstract Part of the geology in the Łódź province was formed during the Upper Permian period when rich Zechstein salt was deposited. Groundwater drains the deposits and flows out in the village of Pełczyska, creating a unique hydrogeological site in Central Poland. An inland, athalassic ecosystem can be a reference site for halophile microflora. The outflow with surrounding marshes has been an algological research site since 1964. The research reveals changes recorded in diatom assemblages from athalassic habitats, characterized by a wide range of salinity levels, and verifies the tolerance of taxa to salinity. The comparative analysis was based on the diatom material sampled in 1964-1965, 1992-1994 and on recently collected samples. The analysis revealed the temporal change in assemblages caused by a change in the chloride concentration, and the spatial change from one to another habitat type, characterized by varying salinity levels. The halophilic species in the studied habitats included e.g. Halamphora dominici, H. tenerrima, Navicula digitoconvergens, N. meulemansii, Staurophora salina. The analysis of changes allowed the verification of the species’ requirements and tolerance range to the salinity factor. Therefore, in the case of Fragilaria famelica and Halamphora sydowii, we propose a change in the halobion system classification.

Protection of Historical Wood against Microbial Degradation—Selection and Application of Microbiocides

The aim of this study was to select effective and safe microbiocides for the disinfection and protection of historical wooden surfaces at the former Auschwitz II-Birkenau concentration and extermination camp. We tested seven active compounds against bacteria and moulds, of which didecyldimethylammonium chloride and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine were effective even at 0.02%–2%. Subsequently, eight microbiocides containing the selected active ingredients were chosen and applied three times on the surface of wood samples colonized by bacteria and moulds. ABM-1 and ABM-2—6% solution; Rocima 101—8%; Preventol R 80—12%; Acticide 706 LV—15% and Boramon—30% were the most effective disinfectants. Under laboratory conditions, ABM-1, Boramon and Rocima 101 ensured antimicrobial protection of new wood samples for six months. In situ, 30% Boramon and 8% Rocima 101 applied by spraying effectively protected the historical wood from bacterial and mould growth for 12 and 3 months, respectively. Colour and luminance of the new wood were not altered after exposure to the biocides. Boramon and Rocima 101, applied by the spraying method, caused no significant change in the colour of the historical wood. Results from this study were used to develop a procedure for the protection of wood in historical buildings against biodeterioration.

Dynamics in cyanobacterial communities from a relatively stable environment in an urbanised area (ambient springs in Central Poland)

Ambient springs are often cited as an example of an ecosystem with stable environmental conditions. A static biotope fosters the development of constant communities with a stable qualitative and relatively stable quantitative structure. Two years of studying cyanobacteria in different microhabitats of the rheocrenic and limnocrenic ambient springs located in urban areas showed that there is a high degree of cyanobacterial diversity and spatial and seasonal dynamics in communities. Spatial heterogeneity in relation to the type of spring and the type of microhabitat is reflected not only by a change in the quantitative structure (the number of species and their biomass), but also by a change in the composition of species. Seasonal changes depended on the type of spring and the type of microhabitat, where weather conditions influenced the communities by different degrees. Cyanobacterial communities of limnocrenes were more diverse in terms of composition and biomass, but they revealed a low seasonal dynamic in contrast to the communities of rheocrenes. The classification of springs based on their environmental conditions revealed that some springs were similar. The resemblance stemmed from the origin of human impact, which was reflected to a high degree in changes in the natural hydrochemical conditions of the springs. For the purpose of understanding which environmental factors had the greatest influence on cyanobacterial communities, a BIO-ENV procedure was performed. The procedure revealed that of most importance was a group of ions not related to the nature of the spring environment - NH4+, NO2-, NO3-, and PO43-. The presence of these ions in groundwater was a result of direct and indirect human activity in the area of aquifers. The dynamics in communities in the studied springs were accelerated by human impact and weather conditions.

Silver nanoparticles as a control agent against facades coated by aerial algae—A model study of Apatococcus lobatus (green algae)

Aerial algae are an important biological factor causing the biodegradation of building materials and facades. Conservation procedures aimed at the protection of historic and utility materials must be properly designed to avoid an increase of the degradation rate. The aim of the present study was to investigate the effect of silver nanoparticles (AgNP) synthetized with features contributing to the accessibility and toxicity (spherical shape, small size) on the most frequently occurring species of green algae in aerial biofilms and thus, the most common biodegradation factor–Apatococcus lobatus. Changes in the chloroplasts structure and the photosynthetic activity of the cells under AgNP exposure were made using confocal laser microscopy and digital image analysis and the estimation of growth inhibition rate was made using a biomass assay. In the majority of cases, treatment with AgNP caused a time and dose dependant degradation of chloroplasts and decrease in the photosynthetic activity of cells leading to the inhibition of aerial algae growth. However, some cases revealed an adaptive response of the cells. The response was induced by either a too low, or—after a short time—too high concentration of AgNP. Taken together, the data suggest that AgNP may be used as a biocide against aerial algal coatings; however, with a proper caution related to the concentration of the nanoparticles.