Pedro M. Reis

Negative Poisson's Ratio Behavior Induced by an Elastic Instability

Negative Poissons ratio behavior has been uncovered in cellular solids that comprise a solid matrix with a square array of circular voids. The simplicity of the fabrication implies robust behavior, which is relevant over a range of scales. The behavior results from an elastic instability, which induces a pattern transformation and excellent quantitative agreement is found between calculation and experiment.

Wrinkling Hierarchy in Constrained Thin Sheets from Suspended Graphene to Curtains

We show that thin sheets under boundary confinement spontaneously generate a universal self-similar hierarchy of wrinkles. From simple geometry arguments and energy scalings, we develop a formalism based on wrinklons, the localized transition zone in the merging of two wrinkles, as building blocks of the global pattern. Contrary to the case of crumpled paper where elastic energy is focused, this transition is described as smooth in agreement with a recent numerical work [R. D. Schroll, E. Katifori, and B. Davidovitch, Phys. Rev. Lett. 106, 074301 (2011)]. This formalism is validated from hundreds of nanometers for graphene sheets to meters for ordinary curtains, which shows the universality of our description. We finally describe the effect of an external tension to the distribution of the wrinkles.

Tearing Graphene Sheets From Adhesive Substrates Produces Tapered Nanoribbons

Graphene is a truly two-dimensional atomic crystal with exceptional electronic and mechanical properties. Whereas conventional bulk and thin-film materials have been studied extensively, the key mechanical properties of graphene, such as tearing and cracking, remain unknown, partly due to its two-dimensional nature and ultimate single-atom-layer thickness, which result in the breakdown of conventional material models. By combining first-principles ReaxFF molecular dynamics and experimental studies, a bottom-up investigation of the tearing of graphene sheets from adhesive substrates is reported, including the discovery of the formation of tapered graphene nanoribbons. Through a careful analysis of the underlying molecular rupture mechanisms, it is shown that the resulting nanoribbon geometry is controlled by both the graphene-substrate adhesion energy and by the number of torn graphene layers. By considering graphene as a model material for a broader class of two-dimensional atomic crystals, these results provide fundamental insights into the tearing and cracking mechanisms of highly confined nanomaterials.

Buckling-induced encapsulation of structured elastic shells under pressure

We introduce a class of continuum shell structures, the Buckliball, which undergoes a structural transformation induced by buckling under pressure loading. The geometry of the Buckliball comprises a spherical shell patterned with a regular array of circular voids. In order for the pattern transformation to be induced by buckling, the possible number and arrangement of these voids are found to be restricted to five specific configurations. Below a critical internal pressure, the narrow ligaments between the voids buckle, leading to a cooperative buckling cascade of the skeleton of the ball. This ligament buckling leads to closure of the voids and a reduction of the total volume of the shell by up to 54%, while remaining spherical, thereby opening the possibility of encapsulation. We use a combination of precision desktop-scale experiments, finite element simulations, and scaling analyses to explore the underlying mechanics of these foldable structures, finding excellent qualitative and quantitative agreement. Given that this folding mechanism is induced by a mechanical instability, our Buckliball opens the possibility for reversible encapsulation, over a wide range of length scales.

Curvature-induced symmetry breaking determines elastic surface patterns

Symmetry-breaking transitions associated with the buckling and folding of curved multilayered surfaces-which are common to a wide range of systems and processes such as embryogenesis, tissue differentiation and structure formation in heterogeneous thin films or on planetary surfaces-have been characterized experimentally. Yet owing to the nonlinearity of the underlying stretching and bending forces, the transitions cannot be reliably predicted by current theoretical models. Here, we report a generalized Swift-Hohenberg theory that describes wrinkling morphology and pattern selection in curved elastic bilayer materials. By testing the theory against experiments on spherically shaped surfaces, we find quantitative agreement with analytical predictions for the critical curves separating labyrinth, hybrid and hexagonal phases. Furthermore, a comparison to earlier experiments suggests that the theory is universally applicable to macroscopic and microscopic systems. Our approach builds on general differential-geometry principles and can thus be extended to arbitrarily shaped surfaces.

How Cats Lap: Water Uptake by Felis catus

Lap Cats We all know that domestic cats lap milk, but perhaps fewer of us have thought about how they do this. Reis et al. (p. 1231, published online 11 November; see the cover) have discovered that cats curl their tongues so that the top surface touches the water. Then, by lifting their tongues rapidly, a column of liquid grows by inertia until gravity induces its breakage and the cats close their jaws to capture the liquid. Lapping frequency is tuned to maximize the volume ingested, depending on the animals mass; a relationship that holds as true for tabby cats as it does for lions. Cats use fluid inertia to generate a liquid column that they catch in their mouths before gravity destroys it. Animals have developed a range of drinking strategies depending on physiological and environmental constraints. Vertebrates with incomplete cheeks use their tongue to drink; the most common example is the lapping of cats and dogs. We show that the domestic cat (Felis catus) laps by a subtle mechanism based on water adhesion to the dorsal side of the tongue. A combined experimental and theoretical analysis reveals that Felis catus exploits fluid inertia to defeat gravity and pull liquid into the mouth. This competition between inertia and gravity sets the lapping frequency and yields a prediction for the dependence of frequency on animal mass. Measurements of lapping frequency across the family Felidae support this prediction, which suggests that the lapping mechanism is conserved among felines.

Crystallization of a Quasi-Two-Dimensional Granular Fluid

We experimentally investigate the crystallization of a uniformly heated quasi-2D granular fluid as a function of the filling fraction. Our experimental results for the Lindemann melting criterion, the radial distribution function, the bond order parameter, and the statistics of topological changes at the particle level are the same as those found in simulations of equilibrium hard disks. This direct mapping suggests that the study of equilibrium systems can be effectively applied to study nonequilibrium steady states such as those found in our driven and dissipative granular system.

Caging dynamics in a granular fluid

We report an experimental investigation of the caging motion in a uniformly heated granular fluid for a wide range of filling fractions, varphi. At low varphi the classic diffusive behavior of a fluid is observed. However, as varphi is increased, temporary cages develop and particles become increasingly trapped by their neighbors. We statistically analyze particle trajectories and observe a number of robust features typically associated with dense molecular liquids and colloids. Even though our monodisperse and quasi-2D system is known to not exhibit a glass transition, we still observe many of the precursors usually associated with glassy dynamics. We speculate that this is due to a process of structural arrest provided, in our case, by the presence of crystallization.

Smart Morphable Surfaces for Aerodynamic Drag Control

Smart Morphable Surfaces enable switchable and tunable aerodynamic drag reduction of bluff bodies. Their topography, resembling the morphology of golf balls, can be custom-generated through a wrinkling instability on a curved surface. Pneumatic actuation of these patterns results in the control of the drag coefficient of spherical samples by up to a factor of two, over a range of flow conditions.

Tearing as a test for mechanical characterization of thin adhesive films.

Thin adhesive films have become increasingly important in applications involving packaging, coating or for advertising. Once a film is adhered to a substrate, flaps can be detached by tearing and peeling, but they narrow and collapse in pointy shapes. Similar geometries are observed when peeling ultrathin films grown or deposited on a solid substrate, or skinning the natural protective cover of a ripe fruit. Here, we show that the detached flaps have perfect triangular shapes with a well-defined vertex angle; this is a signature of the conversion of bending energy into surface energy of fracture and adhesion. In particular, this triangular shape of the tear encodes the mechanical parameters related to these three forms of energy and could form the basis of a quantitative assay for the mechanical characterization of thin adhesive films, nanofilms deposited on substrates or fruit skin.