Peilin Wang

Current Status of EAST Plasma Control and Data Acquisition

This paper briefly outlines the current status of CODAC system of the EAST tokamak. Integrated central system has been working for synchronizing all the subsystems and responsible for the integral safety protection by interlock. Data acquisition system has been established for the discharge with duration up to 100 seconds. Various data visualization tools such as EASTVIEWER to view the flux surfaces, RTSCOPE to view plasma boundary and CCD image in real-time, WEBSCOPE to view the diagnostic data via a web browser and EASTVOD to view and search plasma discharge image at different time, haven developed for EAST operation. Plasma control system is inherited from DIII-D, and has been matured to a stage to feedback control the EAST plasma shape, density and current in real time.

Development of a PET Insert for simultaneously small animal PET/MRI.

PET/MR is a new multi-modality imaging system which provide both structural and functional information with good soft tissue imaging ability and no ionizing radiation. In recent years, PET/MR is under major progress because of the development of silicon photomultipliers (SiPM). The goal of this study is to develop a MRI compatible PET insert based on SiPM and LYSO scintillator. The PET system was constituted by the detector ring, electronics and software. The detector ring consists of 16 detector module. The inner diameter of the ring was 151 mm, the external diameter was 216 mm, which was big enough for small animal research, e.g. rat, rabbit and tupaia. The sensor of each module was 2*2 SensL SPMArraySL, coupled with an array of 14 x 14 LYSO crystals, each crystal measuring 2 mm x 2 mm 10 mm. The detector was encapsulated in a copper box for light and magnetic shielding. Resister charge multiplexing circuit was used in the front end electronics. Each detector output 8X and 8Y position signals. One summed timing signal was extracted from the common cathode of all 64 channels. All these signals were transmitted to digital electronic board by a 3 m long coaxial cable from inside of the MR to the outside. Each digital electronic board handled 8 detector modules based on FPGA to obtain the timing, position and energy information of a single event. And then these single events were sent to the coincidence processing board to produce coincidence packets which are prepared for further processing. A 0.2mCi 68Ge line source was used to do the preliminary imaging test. The image was reconstructed by 3D-OSEM algorithm. The initial result proved the system to be feasible as a PET. FDG phantom imaging and simultaneous PET/MR imaging are in progress.

Performance Evaluation and Initial Clinical Test of the Positron Emission Mammography System (PEMi)

A new polygon positron emission mammography imaging system (PEMi) was developed in 2009 by the Institute of High Energy Physics, Chinese Academy of Sciences. PEMi is constructed in a polygon structure with lutetium yttrium orthosilicate crystal arrays mounted on a position-sensitive photomultiplier. The system consists of 64 blocks and each block is arranged in 16 ×16 crystal arrays with a pixel size of 1.9 ×1.9 ×15 mm. The diameter of the detector ring is 166 mm, and the axial length is 128 mm. The transaxial field of view of PEMi is 110 mm. The goal of the initial study was to test PEMis performance and the clinical imaging ability with a small group of selected subjects. The detectors have a measured intrinsic spatial resolution averaging 1.67 mm. The axial and tangential resolution remained under 2.5-mm full width at half maximum within the central 5-cm diameter of the field of view. The hot rods with a diameter of 1.7 mm can be clearly identified, and the structure of the region containing 1.35-mm diameter rods can also be observed. Using a 6-ns coincidence timing window and a 360 ~ 660-keV energy window, the peak sensitivity of the tomograph is 6.88%. The noise-equivalent count rate peak is 110 \thinspace766 cps for a breast-like cylindrical phantom of 100 mm in diameter at an activity concentration of 0.03 MBq/cc. The recovery coefficients ranged from 0.21 to 0.85 for rods between 1 mm and 5 mm in the image-quality phantom. The reconstructed image resolution achieved an improvement compared with whole-body positron emission tomography (PET), which might reduce the lower threshold on detectable lesion size. Example patient images demonstrate that PEMi is clinically feasible. And more detailed structure information was obtained with PEMi than with the whole-body PET imaging.

A scintillating plastic fiber array and multiplexer based 384-channel fast neutron spectrometer

A fast neutron detection system based on a scintillating plastic fiber array and multiplexer was designed to measure the spectrum of fast neutrons ranged 10 MeV-100 MeV. With the method of nuclear recoil, the energy of incident neutron was determined by measuring the recoil proton track and deposited energy in scintillating plastic fibers. The detection system was composed of a scintillating plastic fiber array, 6 position sensitive photomultiplier tubes, and a high-density readout electronics based on the multiplexer. The scintillating plastic fiber array was made as a staggered structure with two kinds of fibers in different sizes (0.5 mm-square fiber and 3 mm-square fiber). The structure provided a wider detection energy range and better detection efficiency than arrays made with uniform plastic fibers. A dedicated digital electronics system was well designed to control the whole readout system to provide 384-channel signal processing. The detector had a 48 mm × 48 mm effective detection area and a mechanical size of 34 cm × 34 cm × 27 cm. In the simulation of the detector model performance, the system gave an energy resolution of 23%-35% for neutrons ranged 10 MeV-100 MeV. Experimental results showed that the detector had a good energy linearity and energy resolutions were, respectively, 35.82% at 14.817 MeV, 36.84% at 21.264 MeV, 35.90% at 23.069 MeV, and 32.90% at 24.220 MeV. The optimized prototype model had potential in increasing fast neutron detection performance.