Perrine Chaurand

Concurrent aggregation and deposition of TiO2 nanoparticles in a sandy porous media.

The possibility of simultaneous particle aggregation and deposition in a porous medium was examined for the case of TiO(2) nanoparticles (NPs). While potential for particle aggregation is typically assumed to be negligible in porous media due to favored interactions with porous media surfaces (collectors), we show that nanoscale particle dimensions may favor aggregation kinetics, thus altering the transport and retention of these materials in saturated porous media. When surface chemistry favors nanoparticle-nanoparticle attachment (alpha(pp)) over nanoparticle-collector attachment (alpha(pc)), the rate of particle aggregation within pores may be comparable to that of deposition at ratios of collector to nanoparticle surface areas as high as 40. Aggregation of NPs in the porous media enhances NP deposition, however aggregates that are not removed will sample a smaller portion of the available pore network within the column due to size exclusion.

CeO2 nanoparticles induce DNA damage towards human dermal fibroblasts in vitro

Cerium dioxide nanoparticles have been proposed for an increasing number of applications in biomedicine, cosmetic, as polishing materials and also as byproducts from automotive fuel additives. The aim of this study was to examine the potential in vitro cyto- and genotoxicity of nano-sized CeO2 (7 nm) on human dermal fibroblasts. By combining a physico-chemical and a (geno)toxicological approach, we defined the causal mechanisms linking the physico-chemical properties of nano-CeO2 with their biological effects. Using X-ray absorption spectroscopy, we observed a reduction of 21±4% of the Ce4+ atoms localized at the surface of CeO2 nanoparticles due to the interactions with organic molecules present in biological media. These particles induced strong DNA lesions and chromosome damage related to an oxidative stress. These genotoxic effects occurred at very low doses, which highlighted the importance of a genotoxicological approach during the assessment of the toxicity of nanoparticles.

Structural Degradation at the Surface of a TiO2-Based Nanomaterial Used in Cosmetics

A number of commercialized nanomaterials incorporate TiO(2) nanoparticles. Studying their structural stability in media mimicking the environment or the conditions of use is crucial in understanding their potential eco-toxicological effects. We focused here on a hydrophobic TiO(2) nanoparticle-based formulation used in cosmetics: T-Lite SF. It is composed of a TiO(2) core, coated with two successive protective layers of Al(OH)(3), and polydimethylsiloxane. Soon after contact with water (pH = 5, low ionic strength), the T-Lite SF becomes hydrophilic and form aggregates. During this aging, 90%wt of the total Si of the organic layer is desorbed, and the PDMS remaining at the surface is oxidized. The Al(OH)(3) layer is also affected but remains sorbed at the surface. This remaining Al-based layer still protects from the production of superoxide ions from the photoactive/phototoxic TiO(2) core in our experimental conditions.

Kinetics of steel slag leaching: Batch tests and modeling

Reusing steel slag as an aggregate for road construction requires to characterize the leaching kinetics and metal releases. In this study, basic oxygen furnace (BOF) steel slag were subjected to batch leaching tests at liquid to solid ratios (L/S) of 10 and 100 over 30 days; the leachate chemistry being regularly sampled in time. A geochemical model of the steel slag is developed and validated from experimental data, particularly the evolution with leaching of mineralogical composition of the slag and trace element speciation. Kinetics is necessary for modeling the primary phase leaching, whereas a simple thermodynamic equilibrium approach can be used for secondary phase precipitation. The proposed model simulates the kinetically-controlled dissolution (hydrolysis) of primary phases, the precipitation of secondary phases (C-S-H, hydroxide and spinel), the pH and redox conditions, and the progressive release of major elements as well as the metals Cr and V. Modeling indicates that the dilution effect of the L/S ratio is often coupled to solubility-controlled processes, which are sensitive to both the pH and the redox potential. A sensitivity analysis of kinetic uncertainties on the modeling of element releases is performed.

Ecotoxicological effects of an aged TiO2 nanocomposite measured as apoptosis in the anecic earthworm Lumbricus terrestris after exposure through water, food and soil.

Titanium dioxide nanoparticles seem to have a low toxicity to terrestrial organisms, though few studies are published in this area. TiO(2) used in sunscreens are nanocomposites where TiO(2) has been coated with magnesium, silica or alumina, as well as amphiphilic organics like polydimethyl siloxane (PDMS), and these coatings are modified by ageing. We assessed the ecotoxicity and propensity for bioaccumulation of an aged TiO(2) nanocomposite used in sunscreen cosmetics, and its potential effect on the frequency of apoptosis in different earthworm tissues. The earthworm Lumbricus terrestris was exposed to the TiO(2) nanocomposite for 7 days in water or 2-8 weeks in soil with the nanocomposite mixed either into food or soil at concentrations ranging from 0 to 100 mg kg(-1). Apoptosis was then measured by immunohistochemistry and Ti localized by XRF microscopy. Results showed no mortality, but an enhanced apoptotic frequency which was higher in the cuticule, intestinal epithelium and chloragogenous tissue than in the longitudinal and circular musculature. TiO(2) nanoparticles did not seem to cross the intestinal epithelium/chloragogenous matrix barrier to enter the coelomic liquid, or the cuticule barrier to reach the muscular layers. No bioaccumulation of TiO(2) nanocomposites could thus be observed.

Environmental impact of sunscreen nanomaterials: Ecotoxicity and genotoxicity of altered TiO2 nanocomposites on Vicia faba

Mineral sunscreen nanocomposites, based on a nano-TiO(2) core, coated with aluminium hydroxide and dimethicone films, were submitted to an artificial ageing process. The resulting Altered TiO(2) Nanocomposites (ATN) were then tested in the liquid phase on the plant model Vicia faba, which was exposed 48 h to three nominal concentrations: 5, 25 and 50 mg ATN/L. Plant growth, photosystem II maximum quantum yield, genotoxicity (micronucleus test) and phytochelatins levels showed no change compared to controls. Oxidative stress biomarkers remained unchanged in shoots while in roots, glutathione reductase activity decreased at 50 mg ATN/L and ascorbate peroxidase activity decreased for 5 and 25 mg ATN/L. Nevertheless, despite the weak response of biological endpoints, ICP-MS measurements revealed high Ti and Al concentrations in roots, and X-ray fluorescence micro-spectroscopy revealed titanium internalization in superficial root tissues. Eventual long-term effects on plants may occur.

Physico-chemical Control over the Single- or Double-Wall Structure of Aluminogermanate Imogolite-like Nanotubes

It is known that silicon can be successfully replaced by germanium atoms in the synthesis of imogolite nanotubes, leading to shorter and larger AlGe nanotubes. Beside the change in morphology, two characteristics of the AlGe nanotube synthesis were recently discovered. AlGe imogolite nanotubes can be synthesized at much higher concentrations than AlSi imogolite. AlGe imogolite exists in the form of both single-walled (SW) and double-walled (DW) nanotubes, whereas DW AlSi imogolites have never been observed. In this article, we give details on the physicochemical control over the SW or DW AlGe imogolite structure. For some conditions, an almost 100% yield of SW or DW nanotubes is demonstrated. We propose a model for the formation of SW or DW AlGe imogolite, which also explains why DW AlSi imogolites or higher wall numbers for AlGe imogolite are not likely to be formed.

Investigation of Copper Speciation in Pig Slurry by a Multitechnique Approach

It is now well-known that copper (Cu) can accumulate on the surface of soils upon which pig slurry has been applied. This is due to the high quantity of Cu in pig slurry resulting from its use as a growth promoter in animal feeds. The mobility and bioavailability of Cu from pig slurry spreading can be better predicted by determining the speciation of this element in addition to its total concentration. The aim of this study was to present a multitechnique approach to investigate Cu speciation in pig slurry. First, size fractionation and chemical characterization of each size fraction were performed to complement results obtained in raw samples. Micro X-ray fluorescence spectroscopy (μXRF) highlighted the colocalization of Cu and sulfur (S). Finally, X-ray absorption near-edge structure spectroscopy (XANES) showed that Cu speciation in raw pig slurry and size fractions could be described by Cu(2)S and that its oxidation state is Cu(I). In addition, geochemical calculation demonstrated that chalcocite (Cu(2)S) was the major Cu species present under pig slurry lagoon physical-chemical conditions. This Cu speciation in pig slurry may be the main reason for the observed Cu accumulation at the soil surface.

Long-term aging of a CeO2 based nanocomposite used for wood protection

A multi-scale methodology was used to characterize the long-term behavior and chemical stability of a CeO2-based nanocomposite used as UV filter in wood stains. ATR-FTIR and (13)C NMR demonstrated that the citrate coated chelates with Ce(IV) through its central carboxyl- and its α-hydroxyl- groups at the surface of the unaged nanocomposite. After 42 days under artificial daylight, the citrate completely disappeared and small amount of degradation products remained attached to the surface even after 112 days. Moreover, the release/desorption of the citrate layer led to a surface reorganization of the nano-sized CeO2 core observed by XANES (Ce L3-edge). Such a surface and structural transformation of the commercialized nanocomposite could have implications in term of fate, transport, and potential impacts towards the environment.

Adsorption of arsenic on polyaluminum granulate.

The kinetics and efficiencies of arsenite and arsenate removal from water were evaluated using polyaluminum granulates (PAG) with high content of aluminum nanoclusters. PAG was characterized to be meso- and macroporous, with a specific surface area of 35 ± 1 m(2) g(-1). Adsorption experiments were conducted at pH 7.5 in deionized water and synthetic water with composition of As-contaminated groundwater in the Pannonian Basin. As(III) and As(V) sorption was best described by the Freundlich and Langmuir isotherm, respectively, with a maximum As(V) uptake capacity of ~200 μmol g(-1) in synthetic water. While As(III) removal reached equilibrium within 40 h, As(V) was removed almost entirely within 20 h. Micro X-ray fluorescence and electron microscopy revealed that As(III) was distributed uniformly within the grain, whereas As(V) diffused up to 81 μm into PAG. The results imply that As(V) is adsorbed 3 times faster while being transported 10(5) times slower than As(III) in Al hydroxide materials.