Peter A. Strittmatter

Event-horizon-scale structure in the supermassive black hole candidate at the Galactic Centre

The cores of most galaxies are thought to harbour supermassive black holes, which power galactic nuclei by converting the gravitational energy of accreting matter into radiation. Sagittarius A* (Sgr A*), the compact source of radio, infrared and X-ray emission at the centre of the Milky Way, is the closest example of this phenomenon, with an estimated black hole mass that is 4,000,000 times that of the Sun. A long-standing astronomical goal is to resolve structures in the innermost accretion flow surrounding Sgr A*, where strong gravitational fields will distort the appearance of radiation emitted near the black hole. Radio observations at wavelengths of 3.5 mm and 7 mm have detected intrinsic structure in Sgr A*, but the spatial resolution of observations at these wavelengths is limited by interstellar scattering. Here we report observations at a wavelength of 1.3 mm that set a size of microarcseconds on the intrinsic diameter of Sgr A*. This is less than the expected apparent size of the event horizon of the presumed black hole, suggesting that the bulk of Sgr A* emission may not be centred on the black hole, but arises in the surrounding accretion flow.

Jet-launching structure resolved near the supermassive black hole in m87

Black Hole Close-Up M87 is a giant elliptical galaxy about 55 million light-years away. Accretion of matter onto its central massive black hole is thought to power its relativistic jet. To probe structures on scales similar to that of the black holes event horizon, Doeleman et al. (p. 355, published online 27 September) observed the relativistic jet in M87 at a wavelength of 1.3 mm using the Event Horizon Telescope, a special purpose, very-long-baseline interferometry array consisting of four radio telescopes located in Arizona, California, and Hawaii. The analysis suggests that the accretion disk that powers the jet orbits in the same direction as the spin of the black hole. High-resolution observations of the jet in the galaxy M87 probe structures very close to the galaxy’s central black hole. Approximately 10% of active galactic nuclei exhibit relativistic jets, which are powered by the accretion of matter onto supermassive black holes. Although the measured width profiles of such jets on large scales agree with theories of magnetic collimation, the predicted structure on accretion disk scales at the jet launch point has not been detected. We report radio interferometry observations, at a wavelength of 1.3 millimeters, of the elliptical galaxy M87 that spatially resolve the base of the jet in this source. The derived size of 5.5 ± 0.4 Schwarzschild radii is significantly smaller than the innermost edge of a retrograde accretion disk, suggesting that the M87 jet is powered by an accretion disk in a prograde orbit around a spinning black hole.

1.3 mm WAVELENGTH VLBI OF SAGITTARIUS A*: DETECTION OF TIME-VARIABLE EMISSION ON EVENT HORIZON SCALES

Sagittarius A*, the ~4 × 10^6 M_⊙ black hole candidate at the Galactic center, can be studied on Schwarzschild radius scales with (sub)millimeter wavelength very long baseline interferometry (VLBI). We report on 1.3 mm wavelength observations of Sgr A* using a VLBI array consisting of the JCMT on Mauna Kea, the Arizona Radio Observatory’s Submillimeter Telescope on Mt. Graham in Arizona, and two telescopes of the CARMA array at Cedar Flat in California. Both Sgr A* and the quasar calibrator 1924−292 were observed over three consecutive nights, and both sources were clearly detected on all baselines. For the first time, we are able to extract 1.3mmVLBI interferometer phase information on Sgr A* through measurement of closure phase on the triangle of baselines. On the third night of observing, the correlated flux density of Sgr A* on all VLBI baselines increased relative to the first two nights, providing strong evidence for time-variable change on scales of a few Schwarzschild radii. These results suggest that future VLBI observations with greater sensitivity and additional baselines will play a valuable role in determining the structure of emission near the event horizon of Sgr A*.

Uniformly rotating main-sequence stars.

Homogeneous uniformly rotating main sequence stars models construction, discussing results for three stellar masses

Multiple mirror telescope as a phased array telescope

By adjusting the optical path lengths of its individual beams, it is possible to make the multiple mirror telescope (MMT) into a phased array with a 6.86-m base line. A coherent phased focus can be achieved with tilted focal planes if the tilt angle is chosen so that the internal phase differences exactly compensate the external phase differences. This amounts to a slight change in configuration so that the beams are brought together at f/8.39 rather than the originally designed f/9. We summarize experiments which have used the MMT subapertures as a phased array and as a coherent phased telescope and present a simple analysis of the titled focal plane geometry for coherent observation. The phased operation of the MMT is important not only for obtaining high angular resolution but also for obtaining the higher detection sensitivity which results from the better discrimination against the sky emission background for IR diffraction-limited images. Full-aperture (six-beam) diffraction-limited results for the unresolved source Gama Orionis, the well-known close binary Capella, and the resolved red supergiant Betelgeuse (including a diffraction-limited differential speckle image of the latter) are presented as preliminary demonstration of the potential capabilities of this configuration.

PERSISTENT ASYMMETRIC STRUCTURE OF SAGITTARIUS A* ON EVENT HORIZON SCALES

The Galactic Center black hole Sagittarius A* (Sgr A*) is a prime observing target for the Event Horizon Telescope (EHT), which can resolve the 1.3 mm emission from this source on angular scales comparable to that of the general relativistic shadow. Previous EHT observations have used visibility amplitudes to infer the morphology of the millimeter-wavelength emission. Potentially much richer source information is contained in the phases. We report on 1.3 mm phase information on Sgr A* obtained with the EHT on a total of 13 observing nights over 4 years. Closure phases, the sum of visibility phases along a closed triangle of interferometer baselines, are used because they are robust against phase corruptions introduced by instrumentation and the rapidly variable atmosphere. The median closure phase on a triangle including telescopes in California, Hawaii, and Arizona is nonzero. This result conclusively demonstrates that the millimeter emission is asymmetric on scales of a few Schwarzschild radii and can be used to break 180-degree rotational ambiguities inherent from amplitude data alone. The stability of the sign of the closure phase over most observing nights indicates persistent asymmetry in the image of Sgr A* that is not obscured by refraction due to interstellar electrons along the line of sight.

Production of 8.4m segments for the Giant Magellan Telescope

Production of segments for the Giant Magellan Telescope is well underway at the Steward Observatory Mirror Lab. We report on the completion of the first 8.4 m off-axis segment, the casting of the second segment, and preparations for manufacture of the remaining segments. The complete set of infrastructure for serial production is in place, including the casting furnace, two 8.4 m capacity grinding and polishing machines, and a 28 m test tower that incorporates four independent measurement systems. The first segment, with 14 mm p-v aspheric departure, is by some measures the most challenging astronomical mirror ever made. Its manufacture took longer than expected, but the result is an excellent figure and demonstration of valuable new systems that will support both fabrication and measurement of the remaining segments. Polishing was done with a 1.2 m stressed lap for smoothing and large-scale figuring, and a series of smaller passive rigid-conformal laps for deterministic figuring on smaller scales. The interferometric measurement produces a null wavefront with a 3-element asymmetric null corrector including a 3.8 m spherical mirror and a computer-generated hologram. In addition to this test, we relied heavily on the new SCOTS slope test with its high accuracy and dynamic range. Evaluation of the measured figure includes simulated active correction using both the 160-actuator mirror support and the alignment degrees of freedom for the off-axis segment.

Speckle interferometric observations of Pluto and Charon

Abstract We report speckle interferometric observations of Pluto and its moon (1978 P1) Charon obtained on 5 June 1980 with a single 1.8-m mirror of the Multiple Mirror Telescope. Our observations yield a separation of 0″.31 (±0″.05) between Pluto and Charon at position angle 285° (±7°) for JD 2444395.75. This result and other direct observations indicate an adjustment of +4.0 hr to the orbital epoch of R. S. Harrington and J. W. Christy [ Astron.J. 86 , 442–443 (1981)]. Our observation, which represents the first resolution of the system near minimum separation, also suggests that the inclination of the orbit to the plane of the sky should be increased by 3°; this will delay the onset of the predicted eclipsee season by one apparition to 1984 or 1985. Our data are consistent with Pluto diameter 0″.14 (±0″.02) = 3000 (±400) km and Charon diameter 0″..05 (±0″.03) = 1100 (±600) km.

Discovery of a magnetic DA white dwarf

The spectrum of the white dwarf suspect, GD 90, is shown to contain broad Balmer lines with resolved Zeeman structure. All the observed features correspond to the calculated spectrum of hydrogen at 5 plus or minus 0.5 MG. A region of approximately 20% of the observed stellar disk must be subject to a reasonably uniform field of this strength. The sigma components of the Zeeman patterns in H beta and H gamma are found to be circularly polarized, indicating that the field has a component directed along the line of sight. There is evidence for an additional stronger and less homogeneous field, as would be expected if the dominant 5 -MG region were at the equator of a dipolar field.

Optics for the 20/20 telescope

We present a plan for making the optics of a 21 m telescope that builds on advances in mirror design and fabrication developed for the Large Binocular Telescope and other large telescopes. The 21 m telescope, with a fast f/0.7 primary mirror made of only seven large honeycomb-sandwich segments and an adaptive secondary mirror with matching segments, is much stiffer than other designs and offers simpler and more accurate wavefront control. It can be a powerful stand-alone telescope, or one of a pair that move on a circular track to achieve coherent imaging with baselines up to 120 m (the 20/20 telescope). Each segment of the 21 m primary mirror is similar to an 8.4 m LBT primary, and each segment of the 2.1 m adaptive secondary mirror is similar to an LBT secondary. The off-axis segments of both mirrors can be made with the same methods and equipment currently used at the Steward Observatory Mirror Lab, and can be polished with the same stressed-lap polishing system used for the LBT mirrors. A change in algorithm to accommodate the asymmetric surface is required, but no new hardware development is needed because the lap bending is similar to that for the LBT mirrors. Each segment can be measured interferometrically, with a combination reflective and diffractive null corrector producing an accurate template wavefront and alignment references for the segments.