Pierfrancesco Zilio

3D vertical nanostructures for enhanced infrared plasmonics

The exploitation of surface plasmon polaritons has been mostly limited to the visible and near infrared range, due to the low frequency limit for coherent plasmon excitation and the reduction of confinement on the metal surface for lower energies. In this work we show that 3D - out of plane - nanostructures can considerably increase the intrinsic quality of the optical output, light confinement and electric field enhancement factors, also in the near and mid-infrared. We suggest that the physical principle relies on the combination of far field and near field interactions between neighboring antennas, promoted by the 3D out-of-plane geometry. We first analyze the changes in the optical behavior, which occur when passing from a single on-plane nanostructure to a 3D out-of-plane configuration. Then we show that by arranging the nanostructures in periodic arrays, 3D architectures can provide, in the mid-IR, a much stronger plasmonic response, compared to that achievable with the use of 2D configurations, leading to higher energy harvesting properties and improved Q-factors, with bright perspective up to the terahertz range.

Spatially, Temporally, and Quantitatively Controlled Delivery of Broad Range of Molecules into Selected Cells through Plasmonic Nanotubes

A Universal plasmonic/microfluidic platform for spatial and temporal controlled intracellular delivery is described. The system can inject/transfect the desired amount of molecules with an efficacy close to 100%. Moreover, it is highly scalable from single cells to large ensembles without administering the molecules to an extracellular bath. The latter enables quantitative control over the amount of injected molecules.

Angular momentum properties of electromagnetic field transmitted through holey plasmonic vortex lenses

We performed three-dimensional finite elements simulations of the optical response of holey plasmonic vortex lenses, i.e., spiral grooves milled on a thin gold film with a hole at the center. We focus in particular on the properties of the wave transmitted in the underlying half-space, which is shown to be a relevant part of the transmitted field. We find out that the angular momentum selection rule for this part of the field is different from the one for the transmitted plasmonic vortex, although closely related to the plasmonic interaction of the impinging wave with the chiral geometry.

Hybridization in Three Dimensions: A Novel Route toward Plasmonic Metamolecules.

Plasmonic metamolecules have received much interest in the last years because they can produce a wide spectrum of different hybrid optical resonances. Most of the configurations presented so far, however, considered planar resonators lying on a dielectric substrate. This typically yields high damping and radiative losses, which severely limit the performance of the system. Here we show that these limits can be overcome by considering a 3D arrangement made from slanted nanorod dimers extruding from a silver baseplate. This configuration mimics an out-of-plane split ring resonator capable of a strong near-field interaction at the terminations and a strong diffractive coupling with nearby nanostructures. Compared to the corresponding planar counterparts, higher values of electric and magnetic fields are found (about a factor 10 and a factor 3, respectively). High-quality-factor resonances (Q ≈ 390) are produced in the mid-IR as a result of the efficient excitation of collective modes in dimer arrays.

Bilayer holey plasmonic vortex lenses for the far field transmission of pure orbital angular momentum light states

We report the design of a holey plasmonic vortex lens (PVL) structure able to couple circularly polarized impinging light to a plasmonic vortex in the form of the fundamental TM mode of a metal-insulator-metal plasmonic waveguide. The field transmitted through the hole milled at the center of the second metal layer of the structure is characterized by a well-defined spiral harmonic, entirely determined by the spin of impinging light and by the chirality of the PVL structure. Scattering finite elements simulations are presented for single layer standard PVLs and for bilayer ones, comparing the spiral spectra of the transmitted field and the efficiencies of the architectures.

Focusing dynamics on circular distributed tapered metallic waveguides by means of plasmonic vortex lenses

We investigate the focusing effect on circularly distributed planar tapered plasmonic waveguides by means of three-dimensional (3D) finite elements simulations. The proposed configuration allows nanofocusing on four faced planar nanotips, showing efficient condensation of surface plasmons polaritons (SPPs) at the silver/air interface toward the endpoint of the tips. By means of a plasmonic vortex lens it is possible to illuminate the tips with SPP waves carrying orbital angular momentum (OAM), namely plasmonic vortices. Our 3D simulations show that by acting on the topological charge of the plasmonic vortex the electric field charge distribution at the tips apex can be controlled accordingly to the input electric field phase distribution. The results for three particular OAM values are shown, along with a generalization for arbitrary plasmonic vortex angular momentum values.

Broadband absorption enhancement in plasmonic nanoshells-based ultrathin microcrystalline-Si solar cells.

With the objective to conceive a plasmonic solar cell with enhanced photocurrent, we investigate the role of plasmonic nanoshells, embedded within a ultrathin microcrystalline silicon solar cell, in enhancing broadband light trapping capability of the cell and, at the same time, to reduce the parasitic loss. The thickness of the considered microcrystalline silicon (μc-Si) layer is only ~1/6 of conventional μc-Si based solar cells while the plasmonic nanoshells are formed by a combination of silica and gold, respectively core and shell. We analyze the cell optical response by varying both the geometrical and optical parameters of the overall device. In particular, the nanoshells core radius and metal thickness, the periodicity, the incident angle of the solar radiation and its wavelength are varied in the widest meaningful ranges. We further explain the reason for the absorption enhancement by calculating the electric field distribution associated to resonances of the device. We argue that both Fabry-Pérot-like and localized plasmon modes play an important role in this regard.

Light absorption enhancement in heterostructure organic solar cells through the integration of 1-D plasmonic gratings.

The integration of a plasmonic lamellar grating in a heterostructure organic solar cell as a light trapping mechanism is investigated with numerical Finite Elements simulations. A global optimization of all the geometric parameters has been performed. The obtained wide-band enhancement in optical absorption is correlated with both the propagating and the localized plasmonic modes of the structure, which have been identified and characterized in detail.

Hot electrons in water: injection and ponderomotive acceleration by means of plasmonic nanoelectrodes

We present a theoretical and experimental study of a plasmonic nanoelectrode architecture that is able to inject bunches of hot electrons into an aqueous environment. In this approach, electrons are accelerated in water by ponderomotive forces up to energies capable of exciting or ionizing water molecules. This ability is enabled by the nanoelectrode structure (extruding out of a metal baseplate), which allows for the production of an intense plasmonic hot spot at the apex of the structure while maintaining the electrical connection to a virtually unlimited charge reservoir. The electron injection is experimentally monitored by recording the current transmitted through the water medium, whereas the electron acceleration is confirmed by observation of the bubble generation for a laser power exceeding a proper threshold. An understanding of the complex physics involved is obtained via a numerical approach that explicitly models the electromagnetic hot spot generation, electron-by-electron injection via multiphoton absorption, acceleration by ponderomotive forces and electron-water interaction through random elastic and inelastic scattering. The model predicts a critical electron density for bubble nucleation that nicely matches the experimental findings and reveals that the efficiency of energy transfer from the plasmonic hot spot to the free electron cloud is much more efficient (17 times higher) in water than in a vacuum. Because of their high kinetic energy and large reduction potential, these proposed wet hot electrons may provide new opportunities in photocatalysis, electrochemical processes and hot-electron driven chemistry.

Hollow plasmonic antennas for broadband SERS spectroscopy.

Summary The chemical environment of cells is an extremely complex and multifaceted system that includes many types of proteins, lipids, nucleic acids and various other components. With the final aim of studying these components in detail, we have developed multiband plasmonic antennas, which are suitable for highly sensitive surface enhanced Raman spectroscopy (SERS) and are activated by a wide range of excitation wavelengths. The three-dimensional hollow nanoantennas were produced on an optical resist by a secondary electron lithography approach, generated by fast ion-beam milling on the polymer and then covered with silver in order to obtain plasmonic functionalities. The optical properties of these structures have been studied through finite element analysis simulations that demonstrated the presence of broadband absorption and multiband enhancement due to the unusual geometry of the antennas. The enhancement was confirmed by SERS measurements, which showed a large enhancement of the vibrational features both in the case of resonant excitation and out-of-resonance excitation. Such characteristics indicate that these structures are potential candidates for plasmonic enhancers in multifunctional opto-electronic biosensors.