Pierre Buffière

Influence of substrate concentration and moisture content on the specific methanogenic activity of dry mesophilic municipal solid waste digestate spiked with propionate

The objective of this study was to evaluate the influence of substrate concentration and moisture content on the specific methanogenic activity (SMA) of a fresh dry mesophilic digestate from a municipal solid waste digester plant. For this purpose, SMA tests were performed under mesophilic conditions into glass bottles of 500 mL volume used as batch reactors, during a period of 20-25 days. Propionate was used as substrate at concentrations ranging from 1 to 10 gCOD/kg. Four moisture contents were studied: 65%, 75%, 80% and 82%. Experimental results showed that propionate concentration and moisture content strongly influenced the SMA. The highest SMA was observed at a substrate concentration of 10 gCOD/kg (11.3 mgCOD gVS(-1) d(-1) for the second dose of propionate) and at a moisture content of 82% (7.8 mgCOD gVS(-1) d(-1) for the second dose of propionate, at a concentration of 5 gCOD/kg). SMA was found to decrease linearly when decreasing the moisture content.

Liquid mixing and solid segregation in high-solid anaerobic digesters.

An experimental procedure (Residence Time Distribution technique) was used to characterize the macro-mixing of both liquid and solid phases of a laboratory-scale dry anaerobic digester using appropriate tracers. The effects of the waste origin and total solid content were studied. An increase in TS content from 22% to 30% TS (w/w) induced a macro-mixing mode closer to a theoretical Plug Flow Reactor. The segregation of particles having different densities was investigated regarding the RTD of the solid phase. Segregation of dense particles occurred at low TS content. By using different TS content and waste origins, it was also determined that the yield stress was a key parameter in the mechanism of segregation. At high yield stress, dense particles were more stable and thus less subjected to settling. As a consequence, operating at high TS content may permit to prevent the sedimentation of the denser particles.

Can Biomethane Potential (BMP) Be Predicted from Other Variables Such As Biochemical Composition in Lignocellulosic Biomass and Related Organic Residues

The potential of methane production by anaerobic digestion of lignocellulosic biomass depends not only on the availability of the resources in the considered territory, but also on their physico-chemical characteristics. Relevant methods of characterization are, therefore, needed to select and possibly combine the most appropriate biomass substrates in order to optimize energy recovery through anaerobic digestion processes. The objective of the present study was to determine whether biomethane potential of such substrates could be predicted from a limited number of variables more rapidly or determined more easily. A set of 36 biomass substrates and organic residues from a variety of origins was analyzed for total and easily hydrosoluble organic matter fractions (volatile solid, VS and soluble chemical oxygen demand, SCOD), neutral detergent soluble fraction (SOL), hemicelluloses (HEM), cellulose (CELL), and lignin-like residual fractions (RES). Bioreactivity of all samples was also measured by experimental assays (biochemical oxygen demand, BOD and biochemical methane potential, BMP). The whole set of data thereby obtained was analyzed statistically considering one dependent variable (BMP), and six independent variables (SCOD, SOL, HEM, CELL, RES, and BOD). Partial least square (PLS) analysis revealed very clearly a positive correlation between BMP and BOD, which were both anti-correlated with RES. On the other hand, no correlations were observed between BMP, SCOD, HEM, and CELL contents. PLS analysis showed that BMP was significantly correlated to the six independent variables. The most influential variables were found to be RES and BOD, and a polynomial model was successfully validated for the prediction of BMP from RES and BOD.

Understanding the contribution of biofilm in an integrated fixed-film-activated sludge system (IFAS) designed for nitrogen removal

The objective of this study is to improve knowledge on the integrated fixed-film-activated sludge (IFAS) system designed for nitrogen removal. Biofilm growth and its contribution to nitrification were monitored under various operating conditions in a semi-industrial pilot-scale plant. Nitrification rates were observed in biofilms developed on free-floating media and in activated sludge operated under a low sludge retention time (4 days) and at an ammonia loading rate of 45-70 gNH4-N/kgMLVSS/d. Operational conditions, i.e. oxygen concentration, redox potential, suspended solids concentration, ammonium and nitrates, were monitored continuously in the reactors. High removal efficiencies were observed for carbon and ammonium at high-loading rate. The contribution of biofilm to nitrification was determined as 40-70% of total NOx-N production under the operating conditions tested. Optimal conditions to optimize process compacity were determined. The tested configuration responds especially well to winter and summer nitrification conditions. These results help provide a deeper understanding of how autotrophic biomass evolves through environmental and operational conditions in IFAS systems.

Cattle manure for biogas production. Does ensiling and wheat straw addition enhance preservation of biomass and methane potential

ABSTRACT The effects of ensiling and open-air storage on the conservation of cattle manure were investigated for 120 days at laboratory scale. The impact of co-ensiling with wheat straw was assessed as well. Up to 74% of methane potential was lost during aerobic storage. Negligible energetic losses and ammonia emissions occurred during the first month of anaerobic preservation. However, inadequate chemical properties of fresh cattle manure hindered silage stabilization for extended periods, leading to 46% methane losses after 4 months. Co-ensiling of cattle manure with wheat straw enhanced biomass acidification, inducing a conservation of more than 86% of the methane potential after 4 months. Wheat straw addition suppressed ammonia production and limited the risks of losses through liquid effluent. The current study proves that long-term conservation of cattle manure can be achieved if correct management practices are used, which will undoubtedly improve the performance of biogas plants with this raw material. Highlights Ensiling enhanced biomass and methane conservation of cattle manure Ammonia emissions during storage are minimized through ensiling Co-ensiling with wheat straw stabilized biomass at elevated pH value Wheat straw addition minimized risk of losses through effluent production Silage with wheat straw conserved at least 86% of methane potential after 4 months

A review of sulfide emissions in sewer networks: overall approach and systemic modelling.

The problems related to hydrogen sulfide in terms of deterioration of sewer networks, toxicity and odor nuisance have become very clear to the network stakeholders and the public. The hydraulic and (bio)chemical phenomena and parameters controlling sulfide formation, emission and their incidences in sewer networks are very complex. Recent research studies have been developed in gravity and pressure sewers and some transfer models have been published. Nevertheless, the models do not take into account all the physical phenomena influencing the emission process. After summing up the main scientific knowledge concerning the production, oxidation, transfer and emission processes, the present review includes: (i) a synthetic analysis of sulfide and hydrogen sulfide emission models in sewer networks, (ii) an estimation of their limit, (iii) perspectives to improve the modelling approach. It shows that sulfide formation and uptake models still need refinements especially for some phenomena such as liquid to gas mass transfer. Transfer models that have been published so far are purposely simplified and valid for simple systems. More efforts have to be undertaken in order to better understand the mechanisms and the dynamics of hydrogen sulfide production and emission in real conditions.

Influence of relative air/water flow velocity on oxygen mass transfer in gravity sewers

Problems related to hydrogen sulfide may be serious for both network stakeholders and the public in terms of health, sustainability of the sewer structure and urban comfort. H2S emission models are generally theoretical and simplified in terms of environmental conditions. Although air transport characteristics in sewers must play a role in the fate of hydrogen sulfide, only a limited number of studies have investigated this issue. The aim of this study was to better understand H2S liquid to gas transfer by highlighting the link between the mass transfer coefficient and the turbulence in the air flow and the water flow. For experimental safety reasons, O2 was taken as a model compound. The oxygen mass transfer coefficients were obtained using a mass balance in plug flow. The mass transfer coefficient was not impacted by the range of the interface air-flow velocity values tested (0.55-2.28 m·s-1) or the water velocity values (0.06-0.55 m·s-1). Using the ratio between kL,O2 to kL,H2S, the H2S mass transfer behavior in a gravity pipe in the same hydraulic conditions can be predicted.