Pierre Mahy

3D CT-based cephalometric analysis: 3D cephalometric theoretical concept and software.

IntroductionWe present an original three-dimensional cephalometric analysis based on a transformation of a classical two dimensional topological cephalometry.MethodsTo validate the three-dimensional cephalometric CT based concept we systematically compared the alignments of anatomic structures. We used digital lateral radiography to perform the classical two-dimensional cephalometry, and a three-dimensional CT surface model for the three-dimensional cephalometry.ResultsDiagnoses based on both two-dimensional and three-dimensional analyses were adequate, but the three-dimensional analysis gave more information such as the possibility of comparing the right and left side of the skull. Also the anatomic structures were not superimposed which improved the visibility of the reference landmarks.ConclusionWe demonstrated that three-dimensional analysis gives the same results as two-dimensional analysis using the same skull. We also present possible applications of the method.

In vivo colocalization of 2-nitroimidazole EF5 fluorescence intensity and electron paramagnetic resonance oximetry in mouse tumors.

BACKGROUND AND PURPOSE The primary objective of this study was to establish in vivo the relationship between 2-2-nitro-1H-imidazol-1yl-N-(2,2,3,3,3-pentafluoropropyl)-acetamide (EF5) adduct formation and intratumoral oxygen concentrations measured by electron paramagnetic resonance (EPR) in a tumor model mimicking a clinical situation. The secondary objective was an attempt to calibrate in situ the immunofluorescence (IF) signal with EPR oximetry. MATERIALS AND METHODS IM syngeneic fibrosarcoma (NFSA) bearing C3H mice were used. Three days after injection of a paramagnetic charcoal into the tumor, the mice were anesthetized, injected with the hypoxic marker EF5, and monitored every 20 min for 3 h with a low-frequency EPR spectrometer. Animals were allowed to breath either under 21 or 100% O(2). Tumors were then harvested, frozen, cut into sections including the charcoal and processed for EF5 adducts detection using monoclonal antibodies. Slices were viewed with a fluorescence microscope and 190x140 micrometer areas surrounding the charcoal were digitized and analyzed with the NIH-Image and Adobe Photoshop software. The fluorescence intensity (FI) was measured in the whole pictures and in strips of 10 micrometer around the charcoal. RESULTS EF5 binding increased with decreasing pO(2), most substantially at pO(2) below 5 mm Hg. Baseline (ambient air) pO(2) reached 3.2+/-2.1 mm Hg in NFSA tumors. It increased to 9.8+/-3.2 mm Hg under 100% O(2). A statistically significant correlation was observed on an individual tumor basis between the FI in the first 10 micrometer strip around the charcoal and the pO(2) determined by EPR oximetry (Wilcoxon signed rank test: P<0.001). CONCLUSIONS The present study confirms the intrinsic relationship between EF5 adduct binding and intratumoral pO(2) in an in vivo environment under biologically-relevant pO(2) values of less than 10 mm Hg.

Detection of tumour hypoxia: comparison between EF5 adducts and [18F]EF3 uptake on an individual mouse tumour basis

In the framework of the preclinical validation of the hypoxic tracer [18F]EF3, a comparison was performed between uptake of [18F]EF3 and EF5 adducts detected by immunofluorescence in MCa-4, FSA, FSAII, Sa-NH and NFSA tumour-bearing mice. Mice were allowed to breath carbogen (5% CO2, 95% O2), 21% oxygen or 10% oxygen. A significant correlation (r2=0.57; p<0.01) was found between the [18F]EF3 tumour-to-muscle ratio and the fluorescence intensity of EF5.

Does orthodontic loading influence bone mineral density around titanium miniplates? An experimental study in dogs

OBJECTIVES To evaluate whether orthodontic loading has an effect on miniplate stability and bone mineral density (BMD) around the screws supporting those miniplates. SETTING AND SAMPLE POPULATION Two miniplates were inserted in each jaw quadrant of 10 dogs. MATERIAL AND METHODS Two weeks later, coil springs were placed between the miniplates of one upper quadrant and between those of the contralateral lower quadrant. The other miniplates remained non-loaded. The dogs were sacrificed 7 or 29 weeks after surgery, and the jaws were scanned with peripheral Quantitative Computed Tomography (pQCT) to assess BMD. RESULTS The success rate was not significantly different for the loaded and the non-loaded miniplates, but was significantly higher for the maxillary compared to the mandibular ones. Mobility, associated with local inflammation, most often occurred during the transition between primary and secondary stability. pQCT showed higher BMD around mandibular vs. maxillary screws, without significant difference between loaded and non-loaded ones. Furthermore, load direction did not lead to any significant difference in BMD. CONCLUSION Miniplate stability and BMD of the adjacent bone did not appear to depend significantly on orthodontic loading, but rather on the receptor site anatomy.

Orthodontic loading of titanium miniplates in dogs: microradiographic and histological evaluation

OBJECTIVES The objectives of this animal study were to evaluate if orthodontic loading has an impact on osseointegration of screws supporting miniplates, and to describe the histological components of the bone-screw interface. MATERIALS AND METHODS Eighty orthodontic miniplates were placed in the jaws of 10 dogs. After 2 weeks, a 125 g force was applied between the miniplates of one upper quadrant of each dog and between those of the controlateral lower quadrant. The others, nonloaded miniplates, were considered as controls. Five dogs were sacrificed 7 weeks after implantation and the remaining five dogs after 29 weeks [Short Term (ST) and Long Term (LT) groups, respectively]. Fluorochromes were injected at implantation and at sacrifice. Jaw quadrants were dissected, embedded, cut into undecalcified transverse sections through the screws and finally submitted to microradiographic analysis to allow assessment of bone-implant contact (BIC) and bone volume/total volume (BV/TV). The sections were observed under UV light and stained in order to examine them under ordinary light. RESULTS Osseointegration occurred around 90/160 screws and consisted mainly in limited repair and remodelling processes of lamellar bone, without inflammation. Wide variations were observed in BIC and BV/TV, but without any significant difference, neither between the loaded and the nonloaded screws, nor according to the direction of load, whereas they were significantly higher in the LT than in the ST group. Nonosseointegrated screws were surrounded by fibrous tissue. Osteoblastic activity, when present in front of these screws, was not sufficient to achieve stability. CONCLUSIONS Osseointegration underlying orthodontic anchorage was not affected by loading. BIC increased with time and varied according to implantation site. Particularly the tight-fitting screw insertion appeared crucial in determining the appropriate bone healing response.

Alveolar osseous distraction by the combined use of modified miniplates and an orthodontic appliance : A technical note

An original alveolar osseous distraction method using a Hyrax orthodontic device connected to two miniplates modified as a skeletal orthodontic anchorage (Bollard™ type) is reported and illustrated by three cases. In all three cases with alveolar bone insufficiency, the alveolar osseous distraction allowed for dental implant positioning and fixed dental prosthetic rehabilitation.

Microradiographic and histological evaluation of the bone-screw and bone-plate interface of orthodontic miniplates in patients

OBJECTIVES To describe the tissue reactions at the bone-titanium interface of orthodontic miniplates in humans. MATERIALS AND METHODS Forty-two samples, consisting of tissue fragments attached or not to miniplates or their fixation screws, were collected from 24 orthodontic patients treated with miniplate anchorage, at the time of removal of their miniplates. The samples were embedded in methylmethacrylate and cut into undecalcified sections which were submitted to microradiographic analysis. The sections were also stained and examined under ordinary light. RESULTS Three types of reactions were observed both on the histological sections and on the microradiographs. 1. The majority of the stable miniplates were easy to remove (34/42). The tissue samples collected consisted mainly in mature lamellar bone with some medullary spaces containing blood vessels, 2. two screws were highly osseointegrated and required the surgeon to remove them by trephining (2/42). They were surrounded by bone tissue which extended to the miniplate. The histological features were similar to the previous group, though the bone-screw contact was higher, and 3. in six samples obtained after unstable miniplate removal during the treatment, we observed either some woven bone trabeculae or loose connective tissue, without any histological sign of inflammation. LIMITATIONS AND CONCLUSION For evident ethical reasons, our data were limited by the size of the tissue fragments and the limited number of patients and variety of clinical presentations. The healing reactions consisted mainly in mature lamellar bone tissue sparsely in contact with the screw or the miniplate, with signs of a moderate remodelling activity.

Design of a cylindrical brachytherapy implant applicator for the irradiation of an intestinal segment in mice

Abstract Ying, H., Serhir, L., Mahy, P., Reniers, B. and Gueulette, J. Design of a Cylindrical Brachytherapy Implant Applicator for the Irradiation of an Intestinal Segment in Mice. Radiat. Res. 159, 123–127 (2003). Experimental determination of the RBE of new isotopes for brachytherapy implants (e.g. iodine-125 and palladium-103) remains a very difficult problem, especially in small animals, where the seeds cannot be implanted easily in the planned geometry in a reproducible way. This technical note describes an original device that makes it possible to irradiate a segment of the intestine in mice for the purpose of determining the RBE for crypt regeneration. The device is a length of tube (3.4 mm and 7 mm internal and external diameter, respectively) whose external surface has been longitudinally grooved and into which the seeds can be squeezed (each groove holds either one or two seeds). The tube is composed of two sections. This seed container can be surgically positioned around an intestinal ansa while the mice are anesthetized. The mean dose rates in the intestine (for eight seeds) were found to be 86.3 ± 5.9 and 79.0 ± 5.4 cGy/h for 29.2 MBq (1 U) iodine and 28.6 MBq (1 U) palladium seeds, respectively. So far, more than 100 mice have been irradiated successfully. Full dose–effect relationships can be obtained using the same seeds and applying them successively in different groups of animals (which ensured the accuracy of the relative doses).