Pierre Prentki

In vitro insertional mutagenesis with a selectable DNA fragment

A new method for in vitro insertional mutagenesis of genes cloned in Escherichia coli is presented. This simple procedure combines the advantages of in vitro DNA linker mutagenesis with those of in vivo transposition mutagenesis. It makes use of the omega fragment, a 2.0-kb DNA segment consisting of an antibiotic resistance gene (the Smr/Spcr gene of the R100.1 plasmid) flanked by short inverted repeats carrying transcription and translation termination signals and synthetic polylinkers. The omega fragment is inserted into a linearized plasmid by in vitro ligation, and the recombinant DNA molecules are selected by their resistance to streptomycin and spectinomycin. The omega fragment terminates RNA and protein synthesis prematurely, thus allowing the definition and mapping of both transcription and translation units. Because of the symmetrical structure of omega, the same effect is obtained with insertions in either orientation. The antibiotic resistance gene can be subsequently excised from the mutated molecules, leaving behind its flanking restriction site(s).

The plasmid cloning vector pBR325 contains a 482 base-pair-long inverted duplication

The plasmid pBR325 is a cloning vector constructed in vitro by addition of the chloramphenicol resistance (Cmr) gene of an IS1-flanked transposon to pBR322 (Bolivar, 1978). It is a 5 995 bp plasmid carrying no sequence originating from IS1. DNA-sequence data suggest that its Cmr segment was derived from a Cm transposon longer than Tn9. The plasmid pBR325 carries between the Cmr and Tcr genes a 482 bp sequence which duplicates, in the opposite orientation, a section pf pBR322 located at the end of the tcr gene. The same structure was found in pBR328, a deletion derivative of pBR325 (Soberon et al., 1980). The possible implications of this inverted duplication on cloning experiments are discussed.

Processing of unstable bacteriophage T4 gene 32 mRNAs into a stable species requires Escherichia coli ribonuclease E

Gene 32 from bacteriophage T4 is transcribed as precursor transcripts which are processed to a stable product. This processing of the gene 32 mRNA was observed in RNase III or P‐deficient strains of Escherichia coli. However, after infection of an RNase E‐deficient strain, the amount of processed transcript was significantly reduced while the levels of the precursor transcripts remained high. RNase E therefore appears to have an essential role in the processing of the gene 32 mRNA. We have mapped the exact 5′ end of the processed transcript by primer extension. The cleavage occurs near a stem‐loop structure at a site which shows some similarity to other known RNase E cleavage sites. The effects of the processing on the differential stability of the upstream and downstream sequences, and on gene expression, are discussed.

Escherichia coli integration host factor binds specifically to the ends of the insertion sequence IS1 and to its major insertion hot-spot in pBR322☆

We report here that the ends of IS1 are bound and protected in vitro by the heterodimeric protein integration host factor (IHF). Under identical conditions, RNA polymerase binds to one of these ends (IRL) and protects a region that includes the sequences protected by IHF. Other potential sites within IS1, identified by their homology to the apparent consensus sequence, are not protected. Footprinting analysis of deletion derivatives of the ends demonstrates a correspondence between the ability of the end sequence to bind IHF and its ability to function as an end in transposition. Nonetheless, some transposition occurs in IHF- cells, indicating that IHF is not an essential component of the transposition apparatus. IHF also binds and protects four closely spaced regions within the major hot-spot for insertion of IS1 in the plasmid pBR322. This striking correlation of hot-spot and IHF-binding sites suggests a possible role for IHF in IS1 insertion specificity.

Escherichia coli integration host factor bends the DNA at the ends of IS1 and in an insertion hotspot with multiple IHF binding sites.

The integration host factor of Escherichia coli (IHF) is a small, histone‐like protein which participates in the integration of bacteriophage lambda into the E. coli chromosome and in a number of regulatory processes. Our recent footprinting analysis has shown that IHF binds specifically to the ends of the transposable element IS1, as well as to several sites within a short segment of the plasmid pBR322. We have extended our studies of the binding of the IHF molecule to these sites in vitro using a gel retardation assay. We report here that IHF bends the DNA upon binding, as judged from the strong cyclic dependence of the protein‐induced mobility shift on the position of the binding site. Using cloned, synthetic ends of IS1 as substrates, we have found that some mutations within the conserved bases of the IHF consensus binding sequence abolish binding, and that alterations of the flanking sequences can greatly reduce IHF binding. The presence of multiple IHF sites on a single DNA fragment increases binding very little, indicating that IHF does not bind cooperatively in this complex. We discuss the possibility that DNA bending is related to the role IHF plays in forming and stabilizing nucleoprotein complexes, and suggest that bending at the IHF sites may be important to its diverse effects in the cell.

Plasmid vectors for selecting IS1-promoted deletions in cloned DNA: sequence analysis of the omega interposon

We have constructed two plasmid vectors which allow selection for in vivo deletions within cloned DNA fragments. The plasmids are derivatives of pBR322 which carry the Escherichia coli rpsL (strA) gene, known to confer a dominant streptomycin (Sm)-sensitivity phenotype to the host cell, and a copy of the IS1 transposable element. Sm-resistant strains that harbor these plasmids display sensitivity to Sm. Spontaneous IS1-promoted deletions across the rpsL gene can be isolated simply by selection for Sm resistance. Hence, nested sets of deletions of a cloned DNA can be obtained and sequenced with an IS1-specific primer. Using this approach, we have determined the complete nucleotide sequence of the omega interposon [Prentki and Krisch, Gene 29 (1984) 303-313].

Replication of the prophage P1 during the cell cycle of Escherichia coli

SummaryWe have followed, by DNA-DNA hybridization, the variation in the number of copies of prophage P1 relative to two chromosomal markers when the doubling time of the host cells is modified by a change in carbon source. The ratio of P1/chromosome terminus undergoes a twofold decrease when the cell doubling time increases from 24 to 215 min, whereas the ratio of P1/chromosome origin increases 1.4 fold; both ratios tend towards unity at slow growth rates. This suggests that the replication of prophage P1 is not simultaneous with chromosome initiation or chromosome termination. The chromosome replication time is unaffected by the presence of P1, and remains constant over the range of doubling times studied, with a value of about 40 min. Following amino acid starvation, the P1/chromosome origin ratio increases from 0.7 to 0.9, suggesting that P1 retains the ability to replicate after chromosome initiation has stopped and in the absence of essential amino acids. The results are discussed with reference to similar studies done on F and R1.

Omegon-Km: a transposable element designed for in vivo insertional mutagenesis and cloning of genes in gram-negative bacteria.

To combine the features of the omega interposons with the advantages of in vivo transposition mutagenesis, we have constructed an artificial transposon, called Omegon-Km. The Omegon-Km transposon is carried on the plasmid pJFF350 which can be conjugally mobilized into a broad range of Gram-negative bacteria. Omegon-Km is flanked, in inverted orientation, by synthetic 28-bp repeats derived from the ends of IS1. In addition, each end of Omegon-Km has the very efficient transcription and translation terminators of the omega interposon. Internally, Omegon-Km carries the selectable kanamycin (Km)-neomycin resistance gene (alph A) which is expressed well in many Gram-negative bacteria. The IS1 transposition functions are located on the donor plasmid but external to Omegon-Km. Thus, insertions of Omegon-Km are very stable because they lack the capacity for further transposition. Omegon-Km mutagenesis is performed by conjugal transfer of pJFF350 from Escherichia coli into any Gram-negative recipient strain in which this plasmid is unable to replicate. Those cells which have had a transposition event are selected by their resistance to Km. Very high frequencies of Omegon-Km transposition were observed in Pseudomonas putida. Preliminary experiments with other Gram-negative soil and water bacteria (Rhizobium leguminosarum, Paracoccus denitrificans) yielded mutants at reasonable levels. The presence of an E. coli-specific origin of replication (ori) within Omegon-Km allows the rapid and easy cloning, in E. coli, of the nucleotide sequences flanking the site of the transposition event.

A modified pBR322 vector with improved properties for the cloning, recovery, and sequencing of blunt-ended DNA fragments.

The construction of a plasmid vector which facilitates the cloning and recovery of blunt-ended DNA fragments is described. This plasmid, called pHP34, differs from pBR322 by a 10-bp insertion which introduces a unique SmaI site immediately flanked by two EcoRI sites. Blunt-ended DNA fragments cloned in the SmaI site can be recovered by digestion with EcoRI. Small cloned fragments can be chemically sequenced using a strategy which does not require their purification. The use of a plasmid related to pHP34 for in vitro mutagenesis by the insertion of a DNA linker fragment conferring an antibiotic resistance is also discussed.

Expression of proteins essential for IS1 transposition: specific binding of InsA to the ends of IS1.

The insertion sequence IS1 displays a complex array of open reading frames (ORF). In an attempt to identify those which encode polypeptide products, we have systematically placed each ORF under the control of the P1 promoter of phage lambda. In the expression system we used, only the product of the insA gene was present in high enough amounts to be detected by polyacrylamide gel electrophoresis. The production of InsA was further increased in a first codon hook‐up to phage T7 transcriptional and translational initiation signals. Cell extracts from InsA overproducers display a DNA binding activity specific for the ends of IS1. This activity was identified as the InsA protein itself.