Pingchuan Sun

A study on cytocompatible poly(chitosan-g-l-lactic acid)

Abstract A novel cytocompatible graft copolymer of chitosan and l -lactic acid (CL) was prepared by grafting l -lactic acid onto the amino groups in chitosan without a catalyst. The structures of the CL graft copolymers were characterized by FTIR, 13C-NMR and X-ray measurements. Degree of substitution and side-chain length were evaluated from salicylaldehyde and elemental analysis. The tensile strength and water uptake of the CL copolymers films were investigated as a function of feed ratio of LA/CS. The influence of pH on the swelling behavior of the copolymer films was determined and interpreted. Fibroblast culture was performed to evaluate cell proliferation on the copolymers films. The results showed that the cell growth rate on the copolymers films is faster than chitosan obviously.

Bio‐Inspired High‐Performance and Recyclable Cross‐Linked Polymers

Bio-inspired molecular design and synthesis of high-performance and recyclable cross-linked polymers is reported. Reversible cross-links between hard segments are incorporated into linear segmented polyurethane via Diels-Alder reaction between maleimide pendant group and furan cross-linker. The materials form hierarchical structure and exhibit excellent properties with high stiffness, strength and toughness, and can be easily thermally reshaped and re-mended.

Self-assembly of diblock copolymers confined in cylindrical nanopores

Self-assembly of AB diblock copolymers confined in cylindrical nanopores is studied using a simulated annealing technique. The pore diameter and surface preference are systematically varied to examine their effects on the self-assembled morphologies and the chain conformations. For bulk lamella-forming and cylinder-forming diblock copolymers, novel structures such as helices and concentric (perforated) lamellae spontaneously form when the copolymers are confined in cylindrical pores. The observed equilibrium morphologies are compared with that obtained from experiments, theory, and other simulations. A simple model is proposed for symmetric diblock copolymers, which gives a reasonable description of the layer thickness for the concentric lamellae. It is found that chains near the pore surfaces are compressed relative to the bulk chains, which can be attributed to the existence of the surfaces. The dependence of the chain conformation on the degree of confinement and strength of the surface preference are reasonably explained. The energetics is discussed qualitatively and used to account for the appearance of the complex phase behavior observed for certain intermediate conditions.

Silk Fibroin/Montmorillonite Nanocomposites: Effect of pH on the Conformational Transition and Clay Dispersion

By adjusting the solution pH value below the isoelectric point (pI) of silk fibroin (SF) protein, the SF was in the cation state and it could interact strongly with unmodified anionic montmorillonite (MMT) surface. In this way, novel SF-MMT nanocomposites with good clay dispersion were successfully obtained, which were confirmed by X-ray diffraction and transmission electron microscopy. Further 1H CRAMPS and 13C CP/MAS NMR experimental results revealed that beta-sheet content of SF was remarkably enhanced for nanocomposite prepared below the pI of SF (SF-MMTA) due to the strong interaction between MMT and SF. In SF-MMTA nanocomposite, clay layers acting as an efficient nucleator could efficiently enhance the beta-sheet crystallization. On the contrary, SF preserved the native random coil conformation in SF-MMTN nanocomposites due to the weak interaction between MMT and SF. A tentative model was suggested and used to explain the mechanism of clay dispersion and conformational transition of silk protein.

Hierarchically helical mesostructured silica nanofibers templated by achiral cationic surfactant

Recently, ordered chiral mesoporous silica with a twisted hexagonal rod-like morphology and hexagonally ordered chiral channels has been synthesized by using chiral anionic surfactants as a liquid crystal template (S. Che, Z. Liu, T. Ohsuna, K. Sakamoto, O. Terasaki and T. Tatsumi, Nature, 2004, 429, 281). In this work, we report an observation of hierarchically helical mesoporous silica nanofibers organized by the achiral cationic surfactant cetyltrimethylammonium bromide (CTAB). These nanofibers (diameter ranging around 100–300 nm) grew from a two-phase system (H2O, CTAB, HCl for the aqueous phase and tetraethylsiloxane (TEOS) in hexane for the oil phase). SEM and TEM characterizations were performed and the results indicate that these nanofibers possess rope-like twisted hexagonal morphology and helical (chiral) mesoporous channels running inside winding around the fiber axis. These twisted hexagonal nanofibers could further curve spirally to form a second-level helical morphology (hierarchically helical morphology). As no chiral molecules are used in the synthesis, the hierarchically helical morphology of nanofibers could be explained by the different kinds of topological defects existing in the silicate liquid crystal seeds formed in a diffusion-controlled kinetic process, and these defects could initiate and direct the growth of particular forms of mesostructured silica. Formation of the ordered chiral mesorporous silica would be expected to be a general phenomenon in the cooperative assembly between amphiphilic organic molecules (templates) and inorganic species, no matter whether the templates are chiral or achiral.

Anionic surfactant-templated mesoporous silica (AMS) nano-spheres with radially oriented mesopores.

Mesoporous silica nano-spheres with pore size larger than 3 nm were synthesized using an anionic surfactant as the template. These nano-spheres possess centrosymmetric radial mesopores (emanating from the spherical center to the exterior surface) and form stable suspension. The spherical size and mesostructure can be finely tuned by changing the pH value of the synthetic system in the range of 8.8 to 6.4. In addition, when the pH value was decreased to 5.8, instead of spheres, anisotropic morphologies such as elliptical, peanutlike and trifurcate particles were obtained, exhibiting core/shell structure due to the different orientations of the mesopores in the core and the shell of the particles. It is proposed that the evolution of the morphologies and mesostructures of the products templated by anionic surfactants strongly depend on the pH value of the synthetic system.

Simulated annealing study of morphological transitions of diblock copolymers in solution

The simulated annealing method was applied to study the self-assembling process of diblock copolymers in selective solvents for one block. The simulation results illustrated that the morphologies of the copolymer aggregates strongly depend on the interactions between the core-forming blocks and the solvents and on the length of the corona-forming blocks. Multiple morphological transitions were observed in one system. The transition sequence (disordered state-spherical micelles-short rodlike micelles-long rodlike micelles-onionlike aggregates) was observed for copolymers with increasing core-solvent interaction. Similar transitions were observed with the decrease of the length of the corona-forming blocks. The mechanisms of these transitions are investigated. The simulation results are compared with experiments and other simulations.

Cylinder-gyroid-lamella transitions in diblock copolymer solutions: A simulated annealing study

The morphological transition of an asymmetric diblock copolymer [A3-b-B9] in A-selective solvents is investigated using a simulated annealing technique. The study was carried out at high copolymer concentrations. Phase-transitions among hexagonally packed cylinders (C), gyroid (G), and lamellae (L) are observed. The phase transition sequence, C-->G-->L, was obtained with decreasing copolymer concentration and/or increasing B-solvent interaction. The predicted phase-transition sequence is consistent with experiments of diblock copolymers with similar volume fractions in selective solvents of different selectivity. The morphological transitions were further analyzed in terms of the average contact numbers for A or B monomers with other molecules and the total surface area of the core or matrix in each structure. It is found that these quantities correlate with the structures, providing an understanding of the phase-transition mechanisms.

Simulated annealing study of asymmetric diblock copolymer thin films

We report a simulated annealing study of the morphology of asymmetric diblock copolymer thin films confined between two homogeneous and identical surfaces. We have focused on copolymers that form a gyroidal morphology in the bulk. The morphological dependence of the confined films on the film thickness and the surface-polymer interaction has been systematically investigated. From the simulations it is found that much richer morphologies can form for the gyroid-forming asymmetric diblock copolymer thin films, in contrast to the lamella-forming symmetric and cylinder-forming asymmetric diblock copolymer films. Multiple morphological transitions induced by changing the film thickness and polymer-surface interactions are observed.

Polyelectrolyte–Surfactant Complex as a Template for the Synthesis of Zeolites with Intracrystalline Mesopores

Mesoporous zeolite silicalite-1 and Al-ZSM-5 with intracrystalline mesopores were synthesized with polyelectrolyte-surfactant complex as the template. Complex colloids were first formed by self-assembly of the anionic polymer poly(acrylic acid) (PAA) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) in basic solution. During the synthesis procedure, upon the addition of the silica source, microporous template (tetrapropylammonium hydroxide), and NaCl, these PAA/CTA complex colloids underwent dissociation and gave rise to the formation of hollow silica spheres with mesoporous shells templated by CTAB micelles and PAA domains as the core. Under hydrothermal treatment, the hollow silica spheres gradually merged together to form larger particles with the PAA domains embedded as the space occupant, which acted as a template for intracrystalline mesopores during the crystallization of the zeolite framework. Amphiphilic organosilane was used to enhance the connection between the PAA domain and the silica phase during the synthesis. After calcination, single crystal-like zeolite particles with intracrystalline mesopores of about 5-20 nm were obtained, as characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N(2) adsorption measurements. With the addition of an aluminum source in the synthesis, mesoporous zeolite Al-ZSM-5 with intracrystalline mesopores was also synthesized, and enhanced catalytic property was observed with mesoporous Al-ZSM-5 in acetalization of cyclohexanone with methanol.