Pio John S. Buenconsejo

Structure-related antibacterial activity of a titanium nanostructured surface fabricated by glancing angle sputter deposition

The aim of this study was to reproduce the physico-mechanical antibacterial effect of the nanocolumnar cicada wing surface for metallic biomaterials by fabrication of titanium (Ti) nanocolumnar surfaces using glancing angle sputter deposition (GLAD). Nanocolumnar Ti thin films were fabricated by GLAD on silicon substrates. S. aureus as well as E. coli were incubated with nanostructured or reference dense Ti thin film test samples for one or three hours at 37 °C. Bacterial adherence, morphology, and viability were analyzed by fluorescence staining and scanning electron microscopy and compared to human mesenchymal stem cells (hMSCs).Bacterial adherence was not significantly different after short (1 h) incubation on the dense or the nanostructured Ti surface. In contrast to S. aureus the viability of E. coli was significantly decreased after 3 h on the nanostructured film compared to the dense film and was accompanied by an irregular morphology and a cell wall deformation. Cell adherence, spreading and viability of hMSCs were not altered on the nanostructured surface. The results show that the selective antibacterial effect of the cicada wing could be transferred to a nanostructured metallic biomaterial by mimicking the natural nanocolumnar topography.

Time- and space-resolved high-throughput characterization of stresses during sputtering and thermal processing of Al-Cr-N thin films

(Al100−xCrx)N thin-film materials libraries (x = 31–79 at%) were fabricated on micro-machined cantilever arrays, in order to simultaneously investigate the evolution of stresses during film growth as well as during thermal processing by analysing the changes in cantilever curvature. The issue of the dependence of stress in the growing films on composition, at comparable film thicknesses, was investigated. Among the various experimental parameters studied, it was found that the applied substrate bias has the strongest influence on stress evolution and microstructure formation. The compositions of the films, as well as the applied substrate bias, have a pronounced effect on the lattice parameter and the coherence length. For example, applying a substrate bias in general leads to compressive residual stress, increases the lattice parameter and decreases the coherence length. Moreover, bias can change the film texture from [1 1 1] orientation to [2 0 0]. Further detailed analysis using x-ray diffraction and transmission electron microscopy clearly revealed the presence of a [1 1 1] highly textured face centred cubic (B1 type) Al–Cr–N phase in the as-deposited state as well as the coexistence of the hexagonal [1 1 0] textured Cr2N phase, which forms in the Cr-rich region. These results show that the combinatorial approach provides insight into how stresses and compositions are related to phases and microstructures of different Al–Cr–N compositions fabricated in the form of materials libraries.

Preparation of 24 ternary thin film materials libraries on a single substrate in one experiment for irreversible high-throughput studies.

For different areas of combinatorial materials science, it is desirable to have multiple materials libraries: especially for irreversible high-throughput studies, like, for example, corrosion resistance testing in different media or annealing of complete materials libraries at different temperatures. Therefore a new combinatorial sputter-deposition process was developed which yields 24 materials libraries in one experiment on a single substrate. It is discussed with the example of 24 Ti-Ni-Ag materials libraries. They are divided based on the composition coverage and orientation of composition gradient into two sets of 12 nearly identical materials libraries. Each materials library covers at least 30-40% of the complete ternary composition range. An acid etch test in buffered-HF solution was performed, illustrating the feasibility of our approach for destructive materials characterization. The results revealed that within the composition range of Ni < 30 at.%, the films were severely etched. The composition range which shows reversible martensitic transformations was confirmed to be outside this region. The high output of the present method makes it attractive for combinatorial studies requiring multiple materials libraries.

Antibacterial activity of microstructured Ag/Au sacrificial anode thin films.

Ten different Ag dot arrays (16 to 625 microstructured dots per square mm) were fabricated on a continuous Au thin film and for comparison also on Ti film by sputter deposition and photolithographic patterning. To analyze the antibacterial activity of these microstructured films Escherichia coli and Staphylococcus aureus were placed onto the array surfaces and cultivated overnight. To analyze the viability of planktonic as well as surface adherent bacteria, the applied bacterial fluid was subsequently aspirated, plated on blood agar plates and adherent bacteria were detected by fluorescence microscopy. A particular antibacterial effect towards both bacterial strains was induced by Ag dot arrays on fabricated Au thin film (sacrificial anode system for Ag), due to the release of Ag ions from dissolution of Ag dots in contrast to Ag dot arrays fabricated on the Ti thin films (non-sacrificial anode system for Ag) which remained intact to the original dot shape. The required number of Ag dots on gold film to achieve complete bactericidal effects for both bacterial strains was seven times lower than that observed with Ag dot arrays on Ti film.