Piotr Garbacki

UHPLC: The Greening Face of Liquid Chromatography

Pharmaceutical analysis based on chromatographic separation is an important part of studies aimed at developing routine quality analysis of drugs. High-performance liquid chromatography (HPLC) is one of the main analytical techniques recommended for drug analysis. Although it meets many criteria vital for analysis, it is time-consuming and uses a relatively high amount of organic solvents compared to other analytical techniques. Recently, Ultra-high-performance liquid chromatography (UHPLC) has been frequently proposed as an alternative to HPLC, which means introducing an environment-friendly approach to drug analysis achieved by reducing the consumption of solvents. It also offers greater chromatographic resolution and higher sensitivity as well as requiring less time due to faster analysis. This review focuses on the basics of UHPLC, compares that technique with HPLC and discusses the possibilities of applying UHPLC for the analysis of different pharmaceuticals and biopharmaceuticals.

Effect of pharmaceutical excipients on the stability of angiotensin-converting enzyme inhibitors in their solid dosage formulations

Context: The compatibility studies of moexipril hydrochloride (MOXL), imidapril hydrochloride (IMD), enalapril maleate, (ENA) and lisinopril (LIS) in solid state with magnesium stearate and glyceryl behenate were performed. Objective: The aim of this study was to detect any possible drug–excipient interactions in order to optimize technological process conditions by the selection of the most adequate lubricant. Materials and methods: Reversed-phase high-performance liquid chromatography was employed for studying drug–excipient binary mixtures in 1:1 ratio and pure drugs under forced ageing test conditions: temperature 318K (45°C) and relative humidity range of 50.9%–75.4%. The method had been revalidated prior to use. The degradation rate constants for the binary mixtures and pure substances were calculated. Results: The experimental results evidenced that moexipril and enalapril degradation accorded with autocatalytic-second-order kinetics, imidapril degradation followed first-order reaction mechanism, and LIS followed reversible first-order reaction mechanism. A degradation pathway for each substance was proposed to account for the observed decomposition products. It was determined that moexipril stability decreased threefold in the presence of magnesium stearate indicating an incompatibility − (4.15 ± 0.12) 10−3 compared to (1.43 ± 0.32) 10−6 for moexipril in pure. No interaction between magnesium stearate and the remaining studied compounds was observed. The stability studies of MOXL–glyceryl behenate binary mixture revealed no interaction. Conclusion: Magnesium stearate and increased relative humidity induce MOXL instability, while glyceryl behenate is an optimal lubricant, and therefore, it is recommended for moexipril-containing solid formulations. However, for the formulations containing moexipril and magnesium stearate, it is suggested to minimize the humidity level during storage.

Solid-state stability study of meropenem – solutions based on spectrophotometric analysis

BackgroundB-Lactam antibiotics are still the most common group of chemotherapeutic drugs that are used in the treatment of bacterial infections. However, due to their chemical instability the potential to apply them as oral pharmacotherapeutics is often limited and so it is vital to employ suitable non-destructive analytical methods. Hence, in order to analyze such labile drugs as β-lactam analogs, the application of rapid and reliable analytical techniques which do not require transferring to solutions or using organic solvents, following the current green approach to pharmaceutical analysis, is necessary. The main objective of the present research was to develop analytical methods for the evaluation of changes in meropenem in the solid state during a stability study.ResultsThe UV, FT-IR and Raman spectra of meropenem were recorded during a solid-state stability study. The optimum molecular geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated according to the density-functional theory (DFT/B3LYP method) with a 6-31G(d,p) basis set. As the differences between the observed and scaled wavenumber values were small, a detailed interpretation of the FT-IR and Raman spectra was possible for non-degraded and degraded samples of meropenem. The problem of the overlapping spectra of meropenem and ring-containing degradation products was solved by measuring changes in the values of the first-derivative amplitudes of the zero-order spectra of aqueous solutions of meropenem. Also, molecular electrostatic potential (MEP), front molecular orbitals (FMOs) and the gap potential between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were determined.ConclusionsBased on the findings of this work, it appears possible to use time-saving and reliable spectrophotometric analytical methods, supported by quantum-chemical calculations, for solid-state stability investigations of meropenem. The methods developed for this study may be considered a novel, green solution to pharmaceutical analysis of labile drugs – an alternative for the recommended chromatographic procedures.

Stability, compatibility and microbiological activity studies of meropenem-clavulanate potassium.

Meropenem (MEM) and clavulanate potassium have been reported to demonstrate highly effective activity against Mycobacterium tuberculosis. There have been no reports on research into the complex of these chemotherapeutics concerning their mutually dependent stability or microbiological action on other microorganisms. Stability and compatibility studies of MEM/clavulanate potassium were conducted by using an HPLC-DAD method. The antibacterial activity of MEM/clavulanate potassium was tested in vitro against a selection of indicator bacteria strains by determining the MIC as well as analyzing the kinetics of changes in the concentrations of Pseudomonas aeruginosa, Staphylococcus aureus and Listeria monocytogenes caused by the action of MEM/clavulanate potassium. The stability and compatibility of MEM/clavulanate potassium were examined in aqua pro iniectione, 0.9% NaCl and 5% glucose at room temperature and at 5 °C. The degradation rates of MEM/clavulanate potassium depended on the type of infusion solvent used. Although in aqueous solutions of MEM/clavulanate potassium neither compound showed any mutual impact on the rate of degradation, clavulanate potassium was more labile than MEM. The synergy between these two resulted in a significantly lower value of MIC as compared to the values observed for the individual activity of either compound. The infusion solvent in which compatibility is observed between the components of the mixture MEM/clavulanate potassium is aqua pro iniectione. The complex MEM/clavulanate potassium demonstrates synergic antibacterial activity against P. aeruginosa, S. aureus and L. monocytogenes.

Stability studies of cefoselis sulfate in the solid state

The process of degradation was studied by using an HPLC-DAD method. Two degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The influence of temperature and relative air humidity (RH) on the stability of cefoselis sulfate was investigated. In the solid state at increased RH the degradation of cefoselis sulfate was an autocatalytic reaction of the first order with respect to substrate concentration while in dry air was first-order reaction depending on the substrate concentration. The kinetic and thermodynamic parameters of degradation were calculated.

Radiation Sterilization of Anthracycline Antibiotics in Solid State

The impact of ionizing radiation generated by a beam of electrons of 25–400 kGy on the stability of such analogs of anthracycline antibiotics as daunorubicin (DAU), doxorubicin (DOX), and epidoxorubicin (EPI) was studied. Based on EPR results, it was established that unstable free radicals decay exponentially with the half-time of 4 days in DAU and DOX and 7 days in EPI after irradiation. Radiation-induced structural changes were analyzed with the use of spectrophotometric methods (UV-Vis and IR) and electron microscope imaging (SEM). A chromatographic method (HPLC-DAD) was applied to assess changes in the contents of the analogs in the presence of their impurities. The study showed that the structures of the analogs did not demonstrate any significant alterations at the end of the period necessary for the elimination of unstable free radicals. The separation of main substances and related substances (impurities and potential degradation products) allowed determining that no statistically significant changes in the content of particular active substances occurred and that their conversion due to the presence of free radicals resulting from exposure to an irradiation of 25 kGy (prescribed to ensure sterility) was not observed.

Application of vibrational spectroscopy supported by theoretical calculations in identification of amorphous and crystalline forms of cefuroxime axetil.

FT-IR and Raman scattering spectra of cefuroxime axetil were proposed for identification studies of its crystalline and amorphous forms. An analysis of experimental spectra was supported by quantum-chemical calculations performed with the use of B3LYP functional and 6-31G(d,p) as a basis set. The geometric structure of a cefuroxime axetil molecule, HOMO and LUMO orbitals, and molecular electrostatic potential were also determined by using DFT (density functional theory). The benefits of applying FT-IR and Raman scattering spectroscopy for characterization of drug subjected to degradation were discussed.

Stability of cefozopran hydrochloride in aqueous solutions

Abstract The influence of pH on the stability of cefozopran hydrochloride (CZH) was investigated in the pH range of 0.44–13.00. Six degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The degradation of CZH as a result of hydrolysis was a pseudo-first-order reaction. As general acid–base hydrolysis of CZH was not occurred in the solutions of hydrochloric acid, sodium hydroxide, acetate, borate and phosphate buffers, kobs = kpH because specific acid–base catalysis was observed. Specific acid–base catalysis of CZH consisted of the following reactions: hydrolysis of CZH catalyzed by hydrogen ions (kH+), hydrolysis of dications (k1H2O), monocations (k2H2O) and zwitter ions (k3H2O) and hydrolysis of zwitter ions (k1OH−) and monoanions (k2OH−) of CZH catalyzed by hydroxide ions. The total rate of the reaction was equal to the sum of partial reactions: . CZH similarly like other fourth generation cephalosporin was most stable at slightly acidic and neutral pH and less stable in alkaline pH. The cleavage of the β-lactam ring resulting from a nucleophilic attack on the carbonyl carbon in the β-lactam moiety is the preferred degradation pathway of β-lactam antibiotics in aqueous solutions.

Solid-state stability studies of crystal form of tebipenem

Abstract The aim of this study was to determine the kinetic and thermodynamic parameters of tebipenem degradation in the solid state. The process was analyzed based on the results obtained by a high performance liquid chromatography (HPLC) method using ultraviolet diode-array detector (DAD)/electrospray ionization tandem mass spectrometry (Q-TOF-MS/MS), Fourier transform infrared spectroscopy (FT-IR) and Raman spectroscopic (RS) studies. In dry air, the degradation of tebipenem was a first-order reaction depending on the substrate concentration while at an increased relative air humidity tebipenem was degraded according to the kinetic model of autocatalysis. The thermodynamic parameters: energy of activation (Ea), enthalpy (ΔH≠a) and entropy (ΔS≠a) of tebipenem degradation were calculated. Following a spectroscopic analysis of degraded samples of tebipenem, a cleavage of the β-lactam bond was proposed as the main degradation pathway, next confirmation using HPLC-Q-TOF-MS/MS method.

[Meropenem--therapeutic recommendation after twenty years of presence on pharmaceutical market].

Meropenem is the first representative of carbapenem analogues with methyl group, which has been applied in medicine. This drug has been approved by FDA (Food and Drug Administration) in 1996. Available results of clinical trials and scientific reports point surprising synergism of combination of meropenem with other chemotherapeutics, in the treatment of bacterial diseases. Present study based on available information presents indications for use the mentioned antibiotic in pharmacotherapy of infectious diseases. Meropenem is the first representative of carbapenem analogues, which contains methyl group. Introduction of a methyl group at the system of coupled rings: β-lactam and pyrrolidine, solved the problem of degradation by the dehydropeptidase-I (DHP-I). In the consequence it is not necessary to use meropenem in the connection with specific DHP-I inhibitors. Meropenem, similarly to other carbapanem analogues, is intended for the treatment of severe inpatient and outpatient infections. Bacterial resistance to meropenem may be the result of: carbapenemases activity, decreased affinity to Penicillin Binding Proteins--PBP (mainly PBP 2 and PBP 3) and activation of efflux pump (antibiotic ejection outside the cell). Twenty-year period of application of meropenem in pharmacotherapy may cause the spread of methyl-β-lactamases.