Przemysław Zalewski

UHPLC: The Greening Face of Liquid Chromatography

Pharmaceutical analysis based on chromatographic separation is an important part of studies aimed at developing routine quality analysis of drugs. High-performance liquid chromatography (HPLC) is one of the main analytical techniques recommended for drug analysis. Although it meets many criteria vital for analysis, it is time-consuming and uses a relatively high amount of organic solvents compared to other analytical techniques. Recently, Ultra-high-performance liquid chromatography (UHPLC) has been frequently proposed as an alternative to HPLC, which means introducing an environment-friendly approach to drug analysis achieved by reducing the consumption of solvents. It also offers greater chromatographic resolution and higher sensitivity as well as requiring less time due to faster analysis. This review focuses on the basics of UHPLC, compares that technique with HPLC and discusses the possibilities of applying UHPLC for the analysis of different pharmaceuticals and biopharmaceuticals.

Solid-state stability study of meropenem – solutions based on spectrophotometric analysis

BackgroundB-Lactam antibiotics are still the most common group of chemotherapeutic drugs that are used in the treatment of bacterial infections. However, due to their chemical instability the potential to apply them as oral pharmacotherapeutics is often limited and so it is vital to employ suitable non-destructive analytical methods. Hence, in order to analyze such labile drugs as β-lactam analogs, the application of rapid and reliable analytical techniques which do not require transferring to solutions or using organic solvents, following the current green approach to pharmaceutical analysis, is necessary. The main objective of the present research was to develop analytical methods for the evaluation of changes in meropenem in the solid state during a stability study.ResultsThe UV, FT-IR and Raman spectra of meropenem were recorded during a solid-state stability study. The optimum molecular geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated according to the density-functional theory (DFT/B3LYP method) with a 6-31G(d,p) basis set. As the differences between the observed and scaled wavenumber values were small, a detailed interpretation of the FT-IR and Raman spectra was possible for non-degraded and degraded samples of meropenem. The problem of the overlapping spectra of meropenem and ring-containing degradation products was solved by measuring changes in the values of the first-derivative amplitudes of the zero-order spectra of aqueous solutions of meropenem. Also, molecular electrostatic potential (MEP), front molecular orbitals (FMOs) and the gap potential between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were determined.ConclusionsBased on the findings of this work, it appears possible to use time-saving and reliable spectrophotometric analytical methods, supported by quantum-chemical calculations, for solid-state stability investigations of meropenem. The methods developed for this study may be considered a novel, green solution to pharmaceutical analysis of labile drugs – an alternative for the recommended chromatographic procedures.

Stability studies of cefpirome sulfate in the solid state: Identification of degradation products.

The process of degradation was studied by using an HPLC-DAD method. Four degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The influence of temperature and relative air humidity (RH) on the stability of cefpirome sulfate was investigated. In the solid state the degradation of cefpirome sulfate was a first-order reaction depending on the substrate concentration. The kinetic and thermodynamic parameters of degradation were calculated.

Development and validation of the stability-indicating LC-UV method for the determination of cefoselis sulphate

The stability-indicating LC assay method was developed and validated for quantitative determination of cefoselis sulphate in the presence of degradation products formed during the forced degradation studies. An isocratic, RP-HPLC method was developed with C-18 (250 × 4.6 mm, 5 µm) column and 12 mM ammonium acetate-acetonitrile (95:5 V/V) as a mobile phase. The flow rate of the mobile phase was 1.0 mL min−1. Detection wavelength was 260 nm and temperature was 30°C. Cefoselis similarly to other cephalosporins was subjected to stress conditions of degradation in aqueous solutions including hydrolysis, oxidation, photolysis and thermal degradation. The developed method was validated with regard to linearity, accuracy, precision, selectivity and robustness. The method was applied successfully for identification and determination of cefoselis sulphate in pharmaceuticals and during kinetic studies.

Prediction of HPLC retention times of tebipenem pivoxyl and its degradation products in solid state by applying adaptive artificial neural network with recursive features elimination

A sensitive and fast HPLC method using ultraviolet diode-array detector (DAD)/electrospray ionization tandem mass spectrometry (Q-TOF-MS/MS) was developed for the determination of tebipenem pivoxyl and in the presence of degradation products formed during thermolysis. The chromatographic separations were performed on stationary phases produced in core-shell technology with particle diameter of 5.0 µm. The mobile phases consisted of formic acid (0.1%) and acetonitrile at different ratios. The flow rate was 0.8 mL/min while the wavelength was set at 331 nm. The stability characteristics of tebipenem pivoxyl were studied by performing stress tests in the solid state in dry air (RH=0%) and at an increased relative air humidity (RH=90%). The validation parameters such as selectivity, accuracy, precision and sensitivity were found to be satisfying. The satisfied selectivity and precision of determination were obtained for the separation of tebipenem pivoxyl from its degradation products using a stationary phase with 5.0 µm particles. The evaluation of the chemical structure of the 9 degradation products of tebipenem pivoxyl was conducted following separation based on the stationary phase with a 5.0 µm particle size by applying a Q-TOF-MS/MS detector. The main degradation products of tebipenem pivoxyl were identified: a product resulting from the condensation of the substituents of 1-(4,5-dihydro-1,3-thiazol-2-yl)-3-azetidinyl]sulfanyl and acid and ester forms of tebipenem with an open β-lactam ring in dry air at an increased temperature (RH=0%, T=393 K) as well as acid and ester forms of tebipenem with an open β-lactam ring at an increased relative air humidity and an elevated temperature (RH=90%, T=333 K). Retention times of tebipenem pivoxyl and its degradation products were used as training data set for predictive model of quantitative structure-retention relationship. An artificial neural network with adaptation protocol and extensive feature selection process was created. Input parameters for model were calculated from molecular geometries optimized with application of Density Functional Theory. The model was prepared and optimized especially for small data sets such as degradation products of specific compound. Validation of the model with statistical test against requirements for QSAR showed its ability for prediction of retention times within given data set. Mean error of 24.75% (0.8 min) was achieved with utilization of topological, geometrical and electronic descriptors.

Stability, compatibility and microbiological activity studies of meropenem-clavulanate potassium.

Meropenem (MEM) and clavulanate potassium have been reported to demonstrate highly effective activity against Mycobacterium tuberculosis. There have been no reports on research into the complex of these chemotherapeutics concerning their mutually dependent stability or microbiological action on other microorganisms. Stability and compatibility studies of MEM/clavulanate potassium were conducted by using an HPLC-DAD method. The antibacterial activity of MEM/clavulanate potassium was tested in vitro against a selection of indicator bacteria strains by determining the MIC as well as analyzing the kinetics of changes in the concentrations of Pseudomonas aeruginosa, Staphylococcus aureus and Listeria monocytogenes caused by the action of MEM/clavulanate potassium. The stability and compatibility of MEM/clavulanate potassium were examined in aqua pro iniectione, 0.9% NaCl and 5% glucose at room temperature and at 5 °C. The degradation rates of MEM/clavulanate potassium depended on the type of infusion solvent used. Although in aqueous solutions of MEM/clavulanate potassium neither compound showed any mutual impact on the rate of degradation, clavulanate potassium was more labile than MEM. The synergy between these two resulted in a significantly lower value of MIC as compared to the values observed for the individual activity of either compound. The infusion solvent in which compatibility is observed between the components of the mixture MEM/clavulanate potassium is aqua pro iniectione. The complex MEM/clavulanate potassium demonstrates synergic antibacterial activity against P. aeruginosa, S. aureus and L. monocytogenes.

Stability studies of cefoselis sulfate in the solid state

The process of degradation was studied by using an HPLC-DAD method. Two degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The influence of temperature and relative air humidity (RH) on the stability of cefoselis sulfate was investigated. In the solid state at increased RH the degradation of cefoselis sulfate was an autocatalytic reaction of the first order with respect to substrate concentration while in dry air was first-order reaction depending on the substrate concentration. The kinetic and thermodynamic parameters of degradation were calculated.

The Chromatographic Approach to Kinetic Studies of Tebipenem Pivoxil

A validated high-performance liquid chromatography-diode array detector (HPLC-DAD) method for stability studies of tebipenem pivoxil was developed. The separation of tebipenem pivoxil in the presence of main degradation product—tebipenem—was achieved by using a LiChrospher C-18 column (5 µm, 250 × 4.6 mm) with the mobile phase containing a mixture of 50 mmol L(-1) ammonium acetate-acetonitrile-triethylamine (68 : 30 : 2, v/v/v) adjusted to pH 3.5 with concentrated phosphoric acid (V). The column effluent was monitored by a photodiode array detector at 330 nm. The flow rate was 0.8 mL min(-1). Tebipenem pivoxil was subjected to degradation in aqueous solutions (acid-base hydrolysis, oxidation) and in the solid state (photolysis, thermolysis at an increased relative humidity and in dry air). The validated HPLC method was successfully applied to investigate the kinetics of conversion of tebipenem pivoxil to tebipenem (main metabolite). The other degradation products of tebipenem pivoxil were also monitored.

Radiation Sterilization of Anthracycline Antibiotics in Solid State

The impact of ionizing radiation generated by a beam of electrons of 25–400 kGy on the stability of such analogs of anthracycline antibiotics as daunorubicin (DAU), doxorubicin (DOX), and epidoxorubicin (EPI) was studied. Based on EPR results, it was established that unstable free radicals decay exponentially with the half-time of 4 days in DAU and DOX and 7 days in EPI after irradiation. Radiation-induced structural changes were analyzed with the use of spectrophotometric methods (UV-Vis and IR) and electron microscope imaging (SEM). A chromatographic method (HPLC-DAD) was applied to assess changes in the contents of the analogs in the presence of their impurities. The study showed that the structures of the analogs did not demonstrate any significant alterations at the end of the period necessary for the elimination of unstable free radicals. The separation of main substances and related substances (impurities and potential degradation products) allowed determining that no statistically significant changes in the content of particular active substances occurred and that their conversion due to the presence of free radicals resulting from exposure to an irradiation of 25 kGy (prescribed to ensure sterility) was not observed.

The radiolytic studies of cefpirome sulfate in the solid state.

The possibility of applying radiation sterilization to cefpirome sulfate was investigated. The lack of changes in the chemical structure of cefpirome sulfate irradiated with a dose of 25 kGy, required to attain sterility, was confirmed by UV, FT-IR, Raman, DSC and chromatographic methods. Some radical defects with concentration no more than over a several dozen ppm were created by radiation. The antibacterial activity of cefpirome sulfate for two Gram-positive and three Gram-negative strains was changed. The radiation sterilised cefpirome sulfate was not in vitro cytotoxic against fibroblast cells.