Ponnusamy Senthil Kumar

Removal of cadmium(II) from aqueous solution by agricultural waste cashew nut shell

Cashew nut shell (CNS) is a low cost adsorbent that has been used for the removal of cadmium(II) from an aqueous solution. The effects of various parameters such as solution pH, CNS concentration, contact time, initial cadmium(II) concentration and temperature were examined. The CNS was effective for the quantitative removal of cadmium(II) ions in acidic conditions and equilibrium was achieved in 30 min. The experimental data were analyzed by two-parameter (Langmuir, Freundlich, Temkin and Dubinin-Radushkevich) and three-parameter models (Redlich- Peterson, Koble-Corrigan, Toth and Sips) by nonlinear regression analysis. The characteristic parameters for each isotherms and related correlation coefficients have been determined by using MATLAB 7.1. Thermodynamic parameters such as ΔGo, ΔHo and ΔSo have also been evaluated, and it was found that the sorption process was feasible, spontaneous and exothermic. Pseudo-first-order, pseudo-second-order, Elovich kinetic and intraparticle diffusion models were selected to follow the adsorption process. The results of the kinetic study show that the adsorption of cadmium(II) could be described by the pseudo-second order equation, suggesting that the adsorption process is presumably chemisorption. A single-stage batch adsorber was designed for different adsorbent dose-to-effluent volume ratios using the Freundlich equation. The results indicate that the cashew nut shell could be used to effectively adsorb cadmium(II) from an aqueous solution.

Kinetics, mechanism, isotherm and thermodynamic analysis of adsorption of cadmium ions by surface-modified Strychnos potatorum seeds

The surface-modified Strychnos potatorum seeds (SMSP) were used as an effective low-cost adsorbent for the removal of cadmium ions from aqueous solution. SMSP was characterized by Fourier transform infrared spectroscopy and scanning electron microscopic analyses. The effect of operating variables such as solution pH, adsorbent dose, contact time, initial cadmium ions concentration and temperature on the removal of cadmium ions were studied in a batch mode adsorption operation. The optimum conditions for the adsorption of cadmium ions onto the SMSP were found to be: pH of 5.0, SMSP dose of 2 g/L, contact time of 30min, temperature of 30 °C for an initial cadmium ions concentration of 100 mg/L. Kinetic data were analyzed using the pseudo-first order and pseudo-second order kinetic equations, intraparticle diffusion model, Boyd kinetic model and shrinking core model. The characteristic parameters for each model have been estimated. Adsorption of cadmium ions onto the SMSP follows the pseudo-second order kinetic model. The rate-limiting steps in the adsorption process were found to be external and internal diffusion. Equilibrium data were well described by the Langmuir isotherm model than the Freundlich isotherm model, which yields a maximum monolayer adsorption capacity of 200 mg/g. Thermodynamic parameters such as standard free energy change, enthalpy change and entropy change were also estimated. The results show that the removal of cadmium ions by the SMSP was found to be spontaneous and exothermic.

Higher adsorption capacity of Spirulina platensis alga for Cr(VI) ions removal: parameter optimisation, equilibrium, kinetic and thermodynamic predictions

This study discusses about the biosorption of Cr(VI) ion from aqueous solution using ultrasonic assisted Spirulina platensis (UASP). The prepared UASP biosorbent was characterised by Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmet-Teller, scanning electron spectroscopy and energy dispersive X-ray and thermogravimetric analyses. The optimum condition for the maximum removal of Cr(VI) ions for an initial concentration of 50 mg/l by UASP was measured as: adsorbent dose of 1 g/l, pH of 3.0, contact time of 30 min and temperature of 303 K. Adsorption isotherm, kinetics and thermodynamic parameters were calculated. Freundlich model provided the best results for the removal of Cr(VI) ions by UASP. The adsorption kinetics of Cr(VI) ions onto UASP showed that the pseudo-first-order model was well in line with the experimental data. In the thermodynamic study, the parameters like Gibbs free energy, enthalpy and entropy changes were evaluated. This result explains that the adsorption of Cr(VI) ions onto the UASP was exothermic and spontaneous in nature. Desorption of the biosorbent was done using different desorbing agents in which NaOH gave the best result. The prepared material showed higher affinity for the removal of Cr(VI) ions and this may be an alternative material to the existing commercial adsorbents.

Kinetic and equilibrium studies on the biosorption of textile dyes onto Plantago ovata seeds

The powdered seeds of Plantago ovata (PSPO) were utilized for the removal of Malachite Green (MG) and Rose Bengal (RB) dyes from aqueous media by batch adsorption. The Fourier transform infra red spectroscopy (FTIR) results showed that both the dyes were adsorbed between the cellulose matrices, and this has been verified from the intensifying and narrowing aromatic C-H bending vibration. The morphology of the dye laden adsorbent was studied by scanning electron microscopy (SEM), which showed that the dyes were adsorbed between the cellulose matrices of the adsorbent. The PSPO was found to be very effective for the removal of MG and RB at pH 7, and equilibrium was attained within 200 min. The kinetic study indicated that the rate limiting step for MG and RB adsorption may be chemisorption and intraparticle diffusion. Adsorption equilibrium data were fitted to Langmuir, Freundlich, Redlich-Peterson and Temkin adsorption isotherms. It is inferred from the equilibrium studies that the adsorption of MG follows the Freundlich isotherm and the adsorption of RB follows the Langmuir isotherm. The maximum monolayer adsorption capacity of the PSPO was found to be 86.23 mg/g for MG and 81.23 mg/g for RB, respectively.

A new electrode reactor with in-built recirculation mode for the enhancement of methylene blue dye removal from the aqueous solution: Comparison of adsorption, electrolysis and combined effect

The removal of basic dye such as methylene blue (MB) dye from the synthetic wastewater was experimentally investigated using an electrolytic cell (EC), adsorption and the combined effect of EC and adsorption technology called a three-phase three-dimensional electrode reactor (TPTDER). The performance of the each technology was checked on the basis of the efficiency of the systems. The experimental results are expressed in terms of the removal efficiency of the dye molecules. The results show that the TPTDER could efficiently remove the dye molecules from the aqueous solutions when compared with the EC and adsorption process. The removal efficiency reached as high as about 99% for an initial MB dye concentration in the range of 100–1,000 mg/L by TPTDER for 10 min at 12 V cell voltage and at specific airflow conditions. It was also observed that the removal of dye molecules depends upon the initial solution pH, applied cell voltage, contact time, and initial dye concentration. The recyclability of the particle electrodes in the TPTDER process was also checked. These findings suggest that TPTDER is a promising technology for the removal of dyes from the aqueous solution, and can be applied to the removal of dyes from the industrial effluents.

Treatment of dye wastewater using an ultrasonic aided nanoparticle stacked activated carbon: Kinetic and isotherm modelling

The present work explains the biosorption of malachite green dye from aquatic systems by nano zero valent iron stacked activated carbon (NZVI-AC), which was prepared by dual surface modification strategy. NZVI-AC was characterized by using FTIR, SEM-EDX, XRD and TGA. NZVI-AC exhibited efficient performance in dye biosorption properties. Experimental variables such as time, pH, dye concentration, temperature and biosorbent dosage influenced Langmuir adsorption capacity of 187.3 mg/g. The present biosorption system was best described by pseudo-first order kinetics. The dye was completely knocked out of the solution within 60 min at equilibrium. The thermodynamic behaviour of NZVI-AC was exothermic, feasible and spontaneous. Experimental data was engaged to validate new solid-liquid phase equilibrium model, showing the average absolute relative deviation 7.72%. Hence the procedure was non-toxic, potential to retain biosorbent from the solution, applicable for multiple cycles. In context, NZVI-AC can be recommended for the treatment of dyes from industrial effluent.

Enhanced Adsorption Capacity of Biomass through Ultrasonication for the Removal of Toxic Cadmium Ions from Aquatic System: Temperature Influence on Isotherms and Kinetics

AbstractIn this research, a novel activated biomass was prepared from Caryota urens based on sulphuric acid treatment (surface-modified Caryota urens seeds, SMCUS) followed by ultrasonication (ultr...

Surface adsorption of poisonous Pb(II) ions from water using chitosan functionalised magnetic nanoparticles

In this study, chitosan functionalised magnetic nano-particles (CMNP) was synthesised and utilised as an effective adsorbent for the removal of Pb(II) ions from aqueous solution. The experimental studies reveal that adsorbent material has finer adsorption capacity for the removal of heavy metal ions. Parameters affecting the adsorption of Pb(II) ions on CMNP, such as initial Pb(II) ion concentration, contact time, solution pH, adsorbent dosage and temperature were studied. The adsorption equilibrium study showed that present adsorption system followed a Freundlich isotherm model. The experimental kinetic studies on the adsorption of Pb(II) ions exhibited that present adsorption process best obeyed with pseudo-first order kinetics. The maximum monolayer adsorption capacity of CMNP for the removal of Pb(II) ions was found to be 498.6 mg g-1. The characterisation of present adsorbent material was done by FTIR, energy disperse X-ray analysis and vibrating sample magnetometer studies. Thermodynamic parameters such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) have declared that the adsorption process was feasible, exothermic and spontaneous in nature. Sticking probability reported that adsorption of Pb(II) ions on CMNP was favourable at lower temperature and sticking capacity of Pb(II) ions was very high.

Sustainable wastewater treatments in textile sector

Abstract This chapter focuses on the terminology and traditional treatment of textile wastewater concepts. Textile wastewater (TWW) is one of the most important hazardous wastewaters for ecosystems when it is discharged directly into water streams without proper treatment. The textile industry usually consumes a large amount of water and generates an enormous amount of wastewater which contains many types of pathogens, oxygen-demanding substances and inorganic and synthetic organic chemicals. Effluent guidelines and laws for wastewater treatment plants have been enacted by several protection agencies across the world, based on performance and control technologies. Toxic effluent discharged from various textile industries undergoes several physiochemical processes. Treatment for TWW can be mainly classified into three steps: primary, secondary and tertiary. Conventional treatment methods such as adsorption, coagulation, membrane separation, flotation, ozonation, ion exchange, evaporation and crystallization have been commonly employed for the treatment of TWW. Advanced wastewater treatment can effectively recover water from textile effluents and possibly reuse it in the production process. AWT technologies encourage the design of processes that diminish the spreading and generation of hazardous substances in an aqueous environment. Implementation of suitable AWT processes in textile industries is discussed in a separate section.

Sources and impacts of pharmaceutical components in wastewater and its treatment process: A review

Pharmaceutical compounds and their derivatives are major pollutants in the environment, as their metabolites affect the terrestrial as well as aquatic organisms in one or another way. In recent times, many papers have discussed the treatment procedures for single pharmaceutical and mixture of pharmaceutical components, but only few papers have discussed the fate and the exposure of pharmaceutical contaminants in our environment. In this paper, we discuss the sources and the forms of pharmaceutical products and their resultant in the environment and their addition to the microbial and to human communities. A detailed discussion of various treatment techniques from conventional to current techniques, their advantages and disadvantages is given here. Researchers are finding the techniques in order to completely degrade the contaminants and their transformed products from the environment. Among the technique, s nanotechnology was found to be an efficient technique, and the combination of nanotechnology with other conventional technologies gives higher removal efficiency.