Praneet Opanasopit

Block copolymer design for camptothecin incorporation into polymeric micelles for passive tumor targeting.

AbstractPurpose. Polymeric micelles were designed for targeting of a water-insoluble anticancer agent, camptothecin (CPT). Chemical structures of inner core segment were optimized to achieve high incorporation efficiency and stable CPT-loaded micelles. Methods. Poly(ethylene glycol)-poly(β-benzyl L-aspartate) block copolymer (PEG-PBLA) was synthesized. The PBLA chain was modified by alkaline hydrolysis of its benzyl group followed by esterification with benzyl, n-butyl, and lauryl groups. Incorporation of CPT into micelles was carried out by an evaporation method. The stability of drug-loaded micelles was studied by gel-permeation chromatography (GPC), and their in vitro release behaviors were analyzed. Results. CPT was incorporated into polymeric micelles constructed by various block copolymers. Among the esterified groups, block copolymers with high benzyl ester contents showed high CPT loading efficiency and stable CPT-loaded micelles. In chain lengths, 5-27 Bz-69 showed the highest incorporation efficiency. In contrast, 5-52 Bz-67, which had a longer hydrophobic chain, showed low incorporation efficiency. Release of CPT from the micelles was dependent on the benzyl contents and chain lengths. Sustained release was obtained when the benzyl content was high. Conclusions. CPT was successfully incorporated into polymeric micelles with high efficiency and stability by optimizing chemical structures of the inner core segment.

Lysozyme-loaded, electrospun chitosan-based nanofiber mats for wound healing

In this study, a blend mixture of chitosan-ethylenediaminetetraacetic acid (CS 2 wt%-EDTA) at a weight ratio of 30/70 and polyvinyl alcohol (PVA) solution (10 wt%) was electrospun to produce fibrous mats with lysozyme (10, 20 and 30 wt%) used for wound healing. The morphology and diameter of the electrospun fiber mats with and without lysozyme were analyzed by scanning electron microscopy (SEM). The amount of lysozyme loaded in the nanofiber mats was measured by HPLC. The cell lysis activity of the lysozyme was investigated with Micrococcus lysodeikticus cells as a substrate. The wound healing activity was performed in vivo using male Wistar rats. The SEM images of all lysozyme-loaded fibers show a smooth fiber without beads with an average diameter of 143-209 nm. The amount of lysozyme loaded in the nanofiber mats was slightly decreased when the initial concentration of lysozyme was increased. The rapid lysozyme release from the nanofiber mats was obtained and is dependent on the lysozyme-loading amount. In animal wound healing, lysozyme loaded CS-EDTA nanofiber mats accelerated the rate of wound healing when compared to the controls (gauze). In conclusion, our experiments demonstrated that biomaterials composed of lysozyme loaded CS-EDTA nanofibers have a potential for wound healing.

Polymer Design and Incorporation Methods for Polymeric Micelle Carrier System Containing Water-insoluble Anti-cancer Agent Camptothecin

A water-insoluble anti-cancer agent, camptothecin (CPT) was incorporated to a polymeric micelle carrier system forming from poly(ethylene glycol)–poly(aspartate) block copolymers. Incorporation efficiency and stability were analyzed in correlation with chemical structures of the inner core-forming hydrophobic blocks as well as with incorporation methods. Among three incorporation methods (dialysis, emulsion and evaporation methods), an evaporation method brought about much higher CPT yields with less aggregation than the other two methods. By the evaporation method, CPT was incorporated to polymeric micelles in considerably high yields and with high stability using block copolymers possessing high contents of benzyl and methylnaphtyl ester groups as hydrophobic moieties. This indicates importance of molecular design of the hydrophobic block chain to obtain targeting using polymeric micelle carriers as well as importance of the drug incorporation method.

Characterization and In Vitro Skin Permeation of Meloxicam-Loaded Liposomes versus Transfersomes

The goal of this study was to develop and evaluate the potential use of liposome and transfersome vesicles in the transdermal drug delivery of meloxicam (MX). MX-loaded vesicles were prepared and evaluated for particle size, zeta potential, entrapment efficiency (%EE), loading efficiency, stability, and in vitro skin permeation. The vesicles were spherical in structure, 90 to 140 nm in size, and negatively charged (−23 to −43 mV). The %EE of MX in the vesicles ranged from 40 to 70%. Transfersomes provided a significantly higher skin permeation of MX compared to liposomes. Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC) analysis indicated that the application of transfersomes significantly disrupted the stratum corneum lipid. Our research suggests that MX-loaded transfersomes can be potentially used as a transdermal drug delivery system.

Antioxidative and neuroprotective activities of extracts from the fruit hull of mangosteen (Garcinia mangostana Linn.).

Objective: The aim of this study was to investigate the antioxidative and neuroprotective activities of various extracts from the fruit hull of mangosteen (Garcinia mangostana Linn., GM). Materials and Methods: Four extracts: water, 50% ethanol, 95% ethanol and ethyl acetate, were used. The antioxidative activity was evaluated using 2,2-diphenyl-1-picrylhydrazyl free-radical scavenging assay at extract concentrations of 1, 10, 50 and 100 µg/ml. Based on the free radical scavenging activity of the extracts, two (water and 50% ethanol) were selected for their protective activity in NG108-15 neuroblastoma cells against H2O2-induced oxidative stress and for cell viability using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Results: All extracts exhibited antioxidative activity. The water and 50% ethanol extracts showed high free-radical scavenging activity with IC50 values of 34.98 ± 2.24 and 30.76 ± 1.66 µg/ml, respectively. Both water and 50% ethanol extracts exhibited neuroprotective activity on NG108-15 cells. The highest activity was observed at the concentration of 50 µg/ml for both the water and 50% ethanol extracts. For cytotoxicity test, none of the extracts was toxic to the cells except at the high concentration of 100 µg/ml. Conclusions: These results suggest that the water and 50% ethanol extracts from the fruit hull of GM may be potent neuroprotectants.

Development of Meloxicam-Loaded Electrospun Polyvinyl Alcohol Mats as a Transdermal Therapeutic Agent

This study reports on the use of electrospun polyvinyl alcohol (PVA) nanofiber mats loaded with meloxicam (MX) as a transdermal drug delivery system. The amounts of MX loaded in the base PVA solution (10% w/v solution) were 2.5, 5, 10 and 20% weight, based on the dry weight of PVA (% wt). The average diameters of these fibers ranged from 121–185 nm. In all concentrations of MX loaded in spun PVA fiber mats, an amorphous nanodispersion of MX with PVA was obtained. Both the degree of swelling and the weight loss of the electrospun PVA mats were greater than those of the as-cast PVA films. The tensile strength of the as-spun fiber mats was lower than that of the as-cast PVA films, but the strain at the maximum of the as-spun fiber mats was about six times higher than that of the as-cast PVA films. The skin permeation flux of the MX permeated from MX-loaded as-spun PVA were significantly higher than from MX-loaded as-cast PVA films, and increased when the MX content in both MX-loaded as-spun PVA and MX-loaded as-cast PVA films was increased. Our research suggests a potential use for MX-loaded electrospun PVA mats as a transdermal drug delivery system.

Chitosan lactate as a nonviral gene delivery vector in COS-1 cells

The purpose of this research was to evaluate chitosan lactate (CL) of different molecular weights (MWs) as a DNA complexing agent for its efficiency in transfecting COS-1 cells (green monkey fibroblasts) and its effect on cell viability compared with polyethylenimine (PEI), a commercially available cationic polymer. CL and chitosan base dissolved in dilute acetic acid (chitosan acetate, [CA]) of different MWs (20, 45, 200, 460 kDa) and N/P ratios (2∶1, 4∶1, 8∶1, 12∶1, 24∶1) formed complexes with pSV β-galactosidase plasmid DNA. The complexes were characterized by agarose gel electrophoresis and investigated for their ability to transfect COS-1 cells compared with PEI. Additionally, the effect of CL on the viability of COS-1 cells was investigated using 3-(4,5-dimethyliazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The binding of CL/DNA and CA/DNA was dependent on chitosan MWs. The N/P ratio of CL to completely form the complex with the DNA was higher than that of CA. Both CL and CA were comparable in transfection efficiencies at an N/P ratio of 12∶1, but less efficient than PEI (P<.05). The cell viability in the presence of CL and CA at all MWs was over 90%, whereas that of PEI-treated cells was ≈50%. These results suggest the advantage of CL for in vitro gene transfection, with the ease of preparation of polymer/DNA complexes and low cytotoxicity.

Electrospun chitosan-based nanofiber mats loaded with Garcinia mangostana extracts.

The aim of this study was to prepare electrospun chitosan-based nanofiber mats and to incorporate the fruit hull of Garcinia mangostana (GM) extracts into the mats. Chitosan-ethylenediaminetetraacetic acid/polyvinyl alcohol (CS-EDTA/PVA) was selected as the polymers. The GM extracts with 1, 2 and 3 wt% α-mangostin were incorporated into the CS-EDTA/PVA solution and electrospun to obtain nanofibers. The morphology and diameters of the mats were analyzed using scanning electron microscopy (SEM). The mechanical and swelling properties were investigated. The amount of GM extracts was determined using high-performance liquid chromatography (HPLC). The antioxidative activity, antibacterial activity, extract release and stability of the mats were evaluated. In vivo wound healing tests were also performed in Wistar rats. The results indicated that the diameters of the fibers were on the nanoscale and that no crystals of the extract were observed in the mats at any concentration. The mats provided suitable tensile strength and swelling properties. All of the mats exhibited antioxidant and antibacterial activity. During the wound healing test, the mats accelerated the rate of healing when compared to the control (gauze-covered). The mats maintained 90% of their content of α-mangostin for 3 months. In conclusion, the chitosan-based nanofiber mats loaded with GM extracts were successfully prepared using the electrospinning method. These nanofiber mats loaded with GM extracts may provide a good alternative for accelerating wound healing.

Evaluation of Meloxicam-Loaded Cationic Transfersomes as Transdermal Drug Delivery Carriers

The aim of this study is to develop meloxicam (MX)-loaded cationic transfersomes as skin delivery carriers and to investigate the influence of formulation factors such as cholesterol and cationic surfactants on the physicochemical properties of transfersomes (i.e., particle size, size distribution, droplet surface charge and morphology), entrapment efficiency, stability of formulations and in vitro skin permeation of MX. The transfersomes displayed a spherical structure. Their size, charge, and entrapment efficiency depended on the composition of cholesterol and cationic surfactants in the formulation. Transfersomes provided greater MX skin permeation than conventional liposomes and MX suspensions. The penetration-enhancing mechanism of skin permeation by the vesicles prepared in this study may be due to the vesicle adsorption to and/or fusion with the stratum corneum. Our results suggest that cationic transfersomes may be promising dermal delivery carriers of MX.

Neomycin-loaded poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA)/polyvinyl alcohol (PVA) ion exchange nanofibers for wound dressing materials.

In this study, poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) blended with polyvinyl alcohol (PVA) was electrospun and then subjected to thermal crosslinking to produce PSSA-MA/PVA ion exchange nanofiber mats. The cationic drug neomycin (0.001, 0.01, and 0.1%, w/v) was loaded onto the cationic exchange fibers. The amount of neomycin loaded and released and the cytotoxicity of the fiber mats were analyzed. In vivo wound healing tests were also performed in Wistar rats. The results indicated that the diameters of the fibers were on the nanoscale (250 ± 21 nm). The ion exchange capacity (IEC) value and the percentage of water uptake were 2.19 ± 0.1 mequiv./g-dry fibers and 268 ± 15%, respectively. The loading capacity was increased upon increasing the neomycin concentration. An initial concentration of 0.1% (w/v) neomycin (F3) showed the highest loading capacity (65.7 mg/g-dry fibers). The neomycin-loaded nanofiber mats demonstrated satisfactory antibacterial activity against both Gram-positive and Gram-negative bacteria, and an in vivo wound healing test revealed that these mats performed better than gauze and blank nanofiber mats in decreasing acute wound size during the first week after tissue damage. In conclusion, the antibacterial neomycin-loaded PSSA-MA/PVA cationic exchange nanofiber mats have the potential for use as wound dressing materials.