Qifeng Fu

A facile and versatile approach for controlling electroosmotic flow in capillary electrophoresis via mussel inspired polydopamine/polyethyleneimine co-deposition.

Electroosmotic flow (EOF), which reveals the charge property of capillary inner surface, has an important impact on the separation performance and reproducibility of capillary electrophoresis (CE). In this study, a novel, facile and versatile method to achieve diverse and controllable EOF in CE was reported based on the co-deposition of mussel-inspired polydopamine (PDA) and branched polyethyleneimine (PEI) on the capillary inner surface as the hybrid functional coating. After these PDA/PEI co-deposited columns were reinforced by the post-incubation of FeCl3, various magnitude and direction of EOF in CE could be easily achieved by varying a number of preparation parameters, including the mass ratio of DA/PEI and the molecular weight of PEI (including PEI-600, PEI-1800, PEI-10000 and PEI-70000). The separation effectiveness and stability of the hybrid coated columns were verified by the analysis of aromatic acids and aniline derivatives. The results showed that the controllable and diverse EOF was important in enhancing the separation performance of the analytes. The baseline separation of all the five aromatic acids can be achieved in 7 min with high separation efficiency by using the PDA/PEI-600 co-deposited column with the mass ratio of 6:1. On the other hand, with the PDA/PEI-70000 co-deposited column with the mass ratio of 6:1, the aniline compounds were easily baseline separated within 10 min. By contrast, using the bare and PDA coated columns, the migration of the aromatic acids was very slow and the baseline separation of the aniline compounds cannot be obtained. Moreover, the co-deposited columns showed long lifetime and good stability. The relative standard deviations for intra-day, inter-day and capillary-to-capillary repeatability of the PDA/PEI-600 co-deposited column with the mass ratio of 6:1, which was reinforced by the post-incubation of FeCl3, were all lower than 5%.

Layer-by-layer self-assembly of polydopamine/gold nanoparticle/thiol coating as the stationary phase for open tubular capillary electrochromatography

Much attention has been paid to utilizing polydopamine (PDA) as the stationary phase in open-tubular capillary electrochromatography (OT-CEC) owing to its diverse properties, such as strong adhesion to various surfaces, latent reactivity toward amine and thiol groups and metal ion chelating/redox activities. In this study, a novel open-tubular capillary column coated with polydopamine/gold nanoparticles/thiols (PDA/Au NPs/thiols) has been fabricated based on the multiple properties of PDA for the first time. The capillary inner surface was firstly functionalized with a layer of PDA/Au NPs using the strong adhesive and metal ion redox properties of PDA. Thiols were then introduced and covalently reacted with the hybrid coating based on the Michael addition reaction of PDA and thiols and also Au–S bonds. Moreover, benefitting from the porosity of PDA, layer-by-layer (LBL) self-assembly was further applied to increase the amounts of stationary phase (Au NPs and thiols), which can significantly enhance the separation effectiveness and stability of the coated column. The formation of the PDA/Au NP/thiol coating in the capillary was confirmed and characterized by scanning electron microscopy (SEM), Energy Dispersive Spectrometry (EDS) and AFM (Atomic Force Microscopy). Then the separation effectiveness of the PDA/Au NP/thiol@capillary was verified by the separation of alkylbenzenes, which can achieve baseline separation easily with high column efficiency. In addition, the column showed long lifetime and good stability. The relative standard deviations (RSDs) for intra-day and inter-day repeatability of the PDA/Au NP/thiol@capillary were lower than 5%. Therefore, the layer-by-layer self-assembly of PDA/Au NPs/thiols on the capillary inner-surface could be an effective capillary modification strategy.

Molecularly imprinted polymers for the selective extraction of tiliroside from the flowers of Edgeworthia gardneri (wall.) Meisn

Nano-sized molecularly imprinted polymers for tiliroside were successfully prepared by a precipitation polymerization method. Acrylamide, ethylene glycol dimethacrylate, azobisisobutyronitrile, and acetonitrile/dimethyl sulfoxide were used as functional monomer, cross-linker, initiator, and porogen, respectively. The structural features and morphological characterization of tiliroside-imprinted polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The adsorption experiments indicated that the tiliroside-imprinted polymers exhibited high selective recognition property to tiliroside. Scatchard analysis indicated that the homogeneous-binding sites were formed in the polymers. The selectivity test revealed that the adsorption capacity and selectivity of polymers to tiliroside was significantly higher than that of rutin, astragalin, and kaempferol. Finally, the tiliroside-imprinted polymers were employed as adsorbents in solid-phase extraction for the extraction of tiliroside from the ethyl acetate extract of the flowers of Edgeworthia gardneri (wall.) Meisn. The results demonstrated that the extraction recoveries of tiliroside ranged from 69.3 to 73.5% by using tiliroside-imprinted polymers coupled with solid-phase extraction method. These results indicated that the tiliroside-based molecularly imprinted solid-phase extraction method was proven to be an effective technique for the separation and enrichment of tiliroside from natural medicines.

Magnetic molecularly imprinted polymer for the selective extraction of hesperetin from the dried pericarp of Citrus reticulata Blanco

In present study, novel magnetic molecularly imprinted polymers for hesperetin were successfully prepared by surface molecular imprinting method using functionalized Fe3O4 particles as the magnetic cores. Hesperetin as the template, N-Isopropylacrylamide as the functional monomer, ethylene glycol dimethyl acrylate as the crosslinker, 2,2-azobisisobutyonnitrile as initiator and acetonitrile-methanol (3:1, v/v) as the porogen were applied in the preparation process. Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscope, x-ray diffraction and vibrating sample magnetometry were applied to characterize the magnetic molecularly imprinted polymers. The adsorption experiments indicated that the magnetic molecularly imprinted polymers performed high selective recognition property to hesperetin. The selectivity experiment indicated that the adsorption capacity and selectivity of polymers to hesperetin was higher than that of luteolin, baicalein and ombuin. Furthermore, the magnetic molecularly imprinted polymers were employed as adsorbents for extraction and enrichment of hesperetin from the dried pericarp of Citrus reticulata Blanco. The recoveries of hesperetin in the dried pericarp of Citrus reticulata Blanco ranged from 90.5% to 96.9%. The linear range of 0.15-110.72 µg/mL was obtained with correlation coefficient of greater than 0.9991. The limit of detection and quantification of the proposed method was 0.06 µg/mL and 0.15 µg/mL, respectively. Based on three replicate measurements, intra-day RSD was 0.71% and inter-day RSD was 2.31%. These results demonstrated that the prepared magnetic molecularly imprinted polymers were proven to be an effective material for the selective adsorption and enrichment of hesperetin from natural medicines, fruits and et al.

Enhancement of enantioselectivity in chiral capillary electrophoresis using hydroxypropyl-beta-cyclodextrin as chiral selector under molecular crowding conditions induced by dextran or dextrin

Molecular crowding is a new approach to enhance the retention properties and selectivity of molecularly imprinted polymers. In this work, this concept was first applied to chiral CE to enhance its enantioselectivity. A model system, enantioseparation of salbutamol using hydroxypropyl‐beta‐cyclodextrin as chiral selector in the presence of dextran or dextrin as crowding‐inducing agents, was chosen to demonstrate its potency. Some parameters, especially the concentration of crowding‐inducing agents and cyclodextrins were investigated intensively. Moreover, based on fluorescence spectroscopy and affinity CE, it was found that the presence of crowding‐inducing agents could promote the association of enantiomers with cyclodextrins and intensify the interacting differences of two enantiomers with cyclodextrins. As a result, the essential concentration of cyclodextrins to make the enantiomers reach baseline separation was significantly decreased with the aid of molecular crowding. This study shows that molecular crowding is an effective strategy to enhance the enantioselectivity of cyclodextrin in chiral CE.

Mixed-mode liquid chromatography with a stationary phase co-functionalized with ionic liquid embedded C18 and an aryl sulfonate group

A novel silica stationary phase was designed and prepared through thiol-ene click chemistry by functionalizing imidazolium based ionic liquid embedded C18 and an aryl sulfonate group for the mixed-mode liquid chromatography. The developed stationary phase was characterized by elemental analysis (EA), Fourier transform infrared spectrometry (FT-IR) and thermogravimetric analysis (TGA). The chromatographic performances of the prepared column were investigated by reversed phase chromatography using alkylbenzenes and positional isomers, hydrophilic interaction chromatography using nucleosides, nucleic bases and flavonoids, and ion exchange chromatography using acidic and basic analytes. The stationary phase showed faster separation and better performance for these compounds compared to the conventional alkyl stationary phase, especially for the separation of positional isomers. The investigations about water percentage and pH of the mobile phase for retentions provided information that the stationary phase offered multiple interactions with samples including hydrophobic, hydrophilic and electrostatic interactions. Moreover, improved separation efficiency of Qinghuozhimai tablet and vitamin B2 tablet were successfully achieved respectively on a single mixed-mode column. In conclusion, the multimodal retention capabilities of the developed stationary phase could offer flexible selectivity toward various types of compounds and complex samples.

Novel dual functional monomers based molecularly imprinted polymers for selective extraction of myricetin from herbal medicines

Herein, novel dual functional monomers based molecularly imprinted polymers (MIPs) were successfully prepared and used to extract myricetin from Carthamus tinctorius L., also named safflower (family, Compositae) and the flower of Abelmoschus manihot (Linn.) Medicus (family, Malvaceae). The polymers were prepared using myricetin as template, 4-vinylpyridine (4-VP) and glycidyl methacrylate (GMA) as dual functional monomers, ethylene glycol dimethyl acrylate (EGDMA) as cross-linker and methanol-acetonitrile (1:2, v/v) as solvent, respectively. Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were applied to characterize the polymers. Further, the adsorption and selectivity experiments of MIPs were evaluated. The results revealed that MIPs showed high adsorption ability and selectivity toward myricetin. Finally, MIPs were employed as adsorbents for solid phase extraction (SPE) of myricetin from safflower and the flowers of A. manihot (Linn.) Medicus. Further analysis was conducted by using high performance liquid chromatography-diode array detection (HPLC-DAD). The recovery of mrricetin in safflower and in the flowers of A. manihot ranged from 79.82% to 83.91%, 81.50% to 84.32%, respectively. These results indicated that MIPs can be applied to the extraction and separation of myricetin from various complex matrixes.

Preparation and evaluation of a reversed-phase/hydrophilic interaction/ion-exchange mixed-mode chromatographic stationary phase functionalized with dopamine-based dendrimers

In this work, a novel dendritic stationary phase was synthesized by the repeated grafting of 1,4-butanediol diglycidyl ether (BDDE) and dopamine (DA) on the surface of silica for performing mixed-mode high-performance liquid chromatography (MHPLC). Elemental analysis (EA), thermogravimetric analysis (TGA) and Fourier transform infrared spectrometry (FT-IR) showed the successful preparation of the dendritic stationary phase. The prepared stationary phase showed the retention mechanisms of reversed-phase liquid chromatography (RPLC), hydrophilic interaction chromatography (HILIC) and ion-exchange chromatography (IEC) under different mobile phase conditions. In detail, alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs) and hydrophobic positional isomers were separated successfully in the RPLC mode. The baseline separation of nucleobases, nucleosides and flavonoids was achieved under HILIC mode, respectively. Meanwhile, some acidic and basic analytes were used to evaluate the IEC mode. The effects of different chromatographic conditions, such as acetonitrile content, salt concentration and pH in the mobile phase, on the different chromatographic modes were also investigated. In addition, the application of the mixed-mode dendritic stationary phase was demonstrated by the analysis of traditional Chinese medicine (TCM), including Carthamus tinctorius L. and Abelmoschus manihot (Linn.) Medicus. Interestingly, the stationary phase also has the ability for the capture and separation of boric acids. These meaningful applications confirmed that the mixed-mode dendritic stationary phase can be potentially applied in the analysis of complex samples.

Preparation of a poly(ethyleneimine) embedded phenyl stationary phase for mixed-mode liquid chromatography

A poly(ethyleneimine) embedded phenyl mixed-mode stationary phase was prepared through epoxide ring opening reaction. Elemental analysis (EA), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA) were used to characterize whether functional groups have been modified on the surface of silica successfully. The researches of chromatographic performance for designed column were divided to four parts. The retention behavior under reversed-phase mode was studied using polycyclic aromatic hydrocarbons (PAHs), positional isomers and alkylbenzenes. The retention characteristic under hydrophilic interaction mode was studied by nucleosides, nucleobases and flavonoids. The chromatographic performance of anion exchange mode was evaluated by benzoic acids and phenols. Due to a high content of amino and phenyl groups on the stationary phase, aromatic amines were chosen for the evaluation of retention mechanisms of benzene ring attraction and amino repulsion. The investigations about effects of mobile phase constitution and pH on retention demonstrated the mixed-mode retention mechanisms of the column. Furthermore, due to amino selectivity of the column, a method for the rapid separation and determination of phenylenediamines in hair dye was established. And both linear correlation coefficients of p-diaminobenzene and m-diaminobenzene in concentration range from 0.1 to 30 μg mL-1 were over 0.999. In conclude, the prepared mixed-mode stationary phase could realize various separation modes by adjusting chromatographic conditions, and it had the potential for the rapid separation and determination of aniline compounds in various complex samples.