Qinfu Zhao

Mesoporous silica nanoparticles in drug delivery and biomedical applications

UNLABELLED In the past decade, mesoporous silica nanoparticles (MSNs) with a large surface area and pore volume have attracted considerable attention for their application in drug delivery and biomedicine. In this review, we highlight the recent advances in silica-assisted drug delivery systems, including (1) MSN-based immediate/sustained drug delivery systems and (2) MSN-based controlled/targeted drug delivery systems. In addition, we summarize the biomedical applications of MSNs, including (1) MSN-based biotherapeutic agent delivery; (2) MSN-assisted bioimaging applications; and (3) MSNs as bioactive materials for tissue regeneration. FROM THE CLINICAL EDITOR This comprehensive review presents recent advances in mesoporous silica nanoparticles assisted drug delivery systems, including both immediate and sustained delivery systems as well as controlled release and targeted drug delivery systems. In addition to achieving therapeutic agent delivery, imaging applications and potential use of silica NPs in tissue regeneration are also discussed.

Enhanced mucosal and systemic immune responses obtained by porous silica nanoparticles used as an oral vaccine adjuvant: effect of silica architecture on immunological properties.

Three different kinds of silica (S2, S1 and SBA-15) with different particle sizes (130, 430 nm and 1-2 μm) and different pore characteristics (i.e. pore size and shape) were developed as oral vaccine immunological adjuvants and the relationship between the silica architecture and immunological properties was investigated. The silica particles were characterized using SEM, TEM and nitrogen adsorption. Model antigen bovine serum albumin (BSA) was successfully entrapped into the silica pores to produce a sustained release vaccine delivery system. Compared with the responsiveness induced by parenteral administration of BSA emulsified in Freunds complete adjuvant (FCA), oral immunization with the silica/BSA formulation produced a stimulated humoral and mucosal (sIgA) response. The IgG and IgA titers induced by loading BSA was as follows: S1>S2>SBA-15. The highest IgG and IgA titers of S1 were attributed to its large honeycombed pores and the optimal particle diameter of 430 nm. The corresponding IgG1 and IgG2a titers were also investigated to confirm that BSA loaded in nanoparticles by oral immunization can induce both T-helper 1- and T-helper 2- (Th1 or Th2) mediated responses. We believe that the results of our research will open up new avenues for the formulation of oral vaccines.

Dual-stimuli responsive hyaluronic acid-conjugated mesoporous silica for targeted delivery to CD44-overexpressing cancer cells.

In this paper, a redox and enzyme dual-stimuli responsive delivery system (MSN-SS-HA) based on mesoporous silica nanoparticles (MSN) for targeted drug delivery has been developed, in which hyaluronic acid (HA) was conjugated on the surface of silica by cleavable disulfide (SS) bonds. HA possesses many attractive features, including acting as a targeting ligand and simultaneously a capping agent to achieve targeted and controlled drug release, prolonging the blood circulation time, and increasing the physiological stability and biocompatibility of MSN. The anticancer drug doxorubicin (DOX) was chosen as a model drug. In vitro drug release profiles showed that the release of DOX was markedly restricted in pH 7.4 and pH 5.0 phosphate buffer solution (PBS), while it was significantly accelerated upon the addition of glutathione (GSH)/hyaluronidases (HAase). In addition, the release was further accelerated in the presence of both GSH and HAase. Confocal laser scanning microscopy (CLSM) and fluorescence-activated cell sorting (FACS) showed that MSN-SS-HA exhibited a higher cellular uptake via cluster of differentiation antigen-44 (CD44) receptor-mediated endocytosis compared with thiol (SH)-functionalized MSN (MSN-SH) in CD44 receptor over-expressed in human HCT-116 cells. The DOX-loaded MSN-SS-HA was more cytotoxic against HCT-116 cells than NIH-3T3 (CD44 receptor-negative) cells due to the enhanced cellular uptake of MSN-SS-HA. This paper describes the development of an effective method for using a single substance as multi-functional material for MSN to simultaneously regulate drug release and achieve targeted delivery.

Hyaluronic Acid Oligosaccharide Modified Redox-Responsive Mesoporous Silica Nanoparticles for Targeted Drug Delivery

A redox-responsive delivery system based on colloidal mesoporous silica (CMS) has been developed, in which 6-mercaptopurine (6-MP) was conjugated to vehicles by cleavable disulfide bonds. The oligosaccharide of hyaluronic acid (oHA) was modified on the surface of CMS by disulfide bonds as a targeting ligand and was able to increase the stability and biocompatibility of CMS under physiological conditions. In vitro release studies indicated that the cumulative release of 6-MP was less than 3% in the absence of glutathione (GSH), and reached nearly 80% within 2 h in the presence of 3 mM GSH. Confocal microscopy and fluorescence-activated cell sorter (FACS) methods were used to evaluate the cellular uptake performance of fluorescein isothiocyanate (FITC) labeled CMS, with and without oHA modification. The CMS-SS-oHA exhibited a higher cellular uptake performance via CD44 receptor-mediated endocytosis in HCT-116 (CD44 receptor-positive) cells than in NIH-3T3 (CD44 receptor-negative) cells. 6-MP loaded CMS-SS-oHA exhibited greater cytotoxicity against HCT-116 cells than NIH-3T3 cells due to the enhanced cell uptake behavior of CMS-SS-oHA. This study provides a novel strategy to covalently link bioactive drug and targeting ligand to the interiors and exteriors of mesoporous silica to construct a stimulus-responsive targeted drug delivery system.

Hybrid lipid-capped mesoporous silica for stimuli-responsive drug release and overcoming multidrug resistance.

Multidrug resistance (MDR) is known to be a great obstruction to successful chemotherapy, and considerable efforts have been devoted to reverse MDR including designing various functional drug delivery systems. In this study, hybrid lipid-capped mesoporous silica nanoparticles (LTMSNs), aimed toward achieving stimuli-responsive drug release to circumvent MDR, were specially designated for drug delivery. After modifying MSNs with hydrophobic chains through disulfide bond on the surface, lipid molecules composing polymer d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) with molar ratio of 5:1 were subsequently added to self-assemble into a surrounded lipid layer via hydrophobic interaction acting as smart valves to block the pore channels of carrier. The obtained LTMSNs had a narrow size distribution of ca. 190 nm and can be stably dispersed in body fluids, which may ensure a long circulating time and ideal enhanced permeability and retention effect. Doxorubicin (DOX) was chosen as a model drug to be encapsulated into LTMSNs. Results showed that this hybrid lipid-capped mesoporous silica drug delivery system can achieve redox and pH-responsive release of DOX, thereby avoiding the premature leakage of drug before reaching the specific site and releasing DOX within the cancerous cells. Owing to the presence of TPGS-containing lipid layer, LTMSNs-DOX exhibited higher uptake efficiency, cytotoxicity, and increased intracellular accumulation in resistant MCF-7/Adr cells compared with DOX solution, proving to be a promising vehicle to realize intracellular drug release and inhibit drug efflux.

Ordered nanoporous silica as carriers for improved delivery of water insoluble drugs: a comparative study between three dimensional and two dimensional macroporous silica

The goal of the present study was to compare the drug release properties and stability of the nanoporous silica with different pore architectures as a matrix for improved delivery of poorly soluble drugs. For this purpose, three dimensional ordered macroporous (3DOM) silica with 3D continuous and interconnected macropores of different sizes (200 nm and 500 nm) and classic mesoporous silica (ie, Mobil Composition of Matter [MCM]-41 and Santa Barbara Amorphous [SBA]-15) with well-ordered two dimensional (2D) cylindrical mesopores were successfully fabricated and then loaded with the model drug indomethacin (IMC) via the solvent deposition method. Scanning electron microscopy (SEM), N2 adsorption, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were applied to systematically characterize all IMC-loaded nanoporous silica formulations, evidencing the successful inclusion of IMC into nanopores, the reduced crystallinity, and finally accelerated dissolution of IMC. It was worth mentioning that, in comparison to 2D mesoporous silica, 3DOM silica displayed a more rapid release profile, which may be ascribed to the 3D interconnected pore networks and the highly accessible surface areas. The results obtained from the stability test indicated that the amorphous state of IMC entrapped in the 2D mesoporous silica (SBA-15 and MCM-41) has a better physical stability than in that of 3DOM silica. Moreover, the dissolution rate and stability of IMC loaded in 3DOM silica was closely related to the pore size of macroporous silica. The colorimetric 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and Cell Counting Kit (CCK)-8 assays in combination with direct morphology observations demonstrated the good biocompatibility of nanoporous silica, especially for 3DOM silica and SBA-15. The present work encourages further study of the drug release properties and stability of drug entrapped in different pore architecture of silica in order to realize their potential in oral drug delivery.

Potential application of functional porous TiO2 nanoparticles in light-controlled drug release and targeted drug delivery.

Novel multifunctional porous titanium dioxide (TiO2) nanoparticles modified with polyethylenimine (PEI) were developed to explore the feasibility of exploiting the photocatalytic property of titanium dioxide to achieve ultraviolet (UV) light triggered drug release. Additionally, in order to further realize targeting delivery, folic acid, which chemically conjugated to the surface of the functionalized multifunctional porous TiO2 nanoparticles through amide linkage with free amine groups of PEI, was used as a cancer-targeting agent to effectively promote cancer-cell-specific uptake through receptor-mediated endocytosis. And a typical poorly water-soluble anti-cancer drug, paclitaxel, was encapsulated in multifunctional porous TiO2 nanoparticles. The PEI on the surface of multifunctional porous TiO2 nanoparticles could effectively block the channel to prevent premature drug release, thus providing enough circulation time to target cancer cells. Following UV light radiation, PEI molecules on the surface were cut off by the free radicals (OH˙ and O2-) that TiO2 produced, and then the drug loaded in the carrier was released rapidly into the cytoplasm. Importantly, the amount of drug released from multifunctional porous TiO2 nanoparticles can be regulated by the UV-light radiation time to further control the anti-cancer effect. This multifunctional porous TiO2 nanoparticle exhibits a combination of stimuli-triggered drug release and cancer cell targeting. The authors believe that the present study will provide important information for the use of porous TiO2 nanomaterials in light-controlled drug release and targeted therapy.

Redox and pH dual-responsive PEG and chitosan-conjugated hollow mesoporous silica for controlled drug release

In this paper, a hollow mesoporous silica nanoparticles (HMSN) was used as the drug vehicle to develop the redox and pH dual stimuli-responsive delivery system, in which the chitosan (CS), a biodegradable cationic polymer, was grafted on the surface of HMSN via the cleavable disulfide bonds. CS was chosen as the gatekeeper mainly due to its appropriate molecular weight as well as possessing abundant amino groups which could be protonated in the acidic condition to achieve pH-responsive drug release. In addition, the PEG was further grafted on the surface of CS to increase the stability and biocompatibility under physiological conditions. The DOX loaded DOX/HMSN-SS-CS@PEG had a relatively high drug loading efficiency up to 32.8%. In vitro release results indicated that DOX was dramatically blocked within the mesopores of HMSN-SS-CS@PEG in pH 7.4 PBS without addition of GSH. However, the release rate of DOX was markedly increased after the addition of 10mM GSH or in pH5.0 release medium. Moreover, the release of DOX was further improved in pH5.0 PBS with 10mM GSH. The HMSN-SS-CS@PEG could markedly decrease the hemolysis percent and protein adsorption, and increase the biocompatibility and stability of HMSN compared with the HMSN-SS-CS and bare HMSN. This work suggested an exploration about HMSN based stimuli-responsive drug delivery and these results demonstrated that HMSN-SS-CS@PEG exhibited dual-responsive drug release property and could be used as a promising carrier for cancer therapy.

Multilayer encapsulated mesoporous silica nanospheres as an oral sustained drug delivery system for the poorly water-soluble drug felodipine

We used a combination of mesoporous silica nanospheres (MSN) and layer-by-layer (LBL) self-assembly technology to establish a new oral sustained drug delivery system for the poorly water-soluble drug felodipine. Firstly, the model drug was loaded into MSN, and then the loaded MSN were repeatedly encapsulated by chitosan (CHI) and acacia (ACA) via LBL self-assembly method. The structural features of the samples were studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption. The encapsulating process was monitored by zeta-potential and surface tension measurements. The physical state of the drug in the samples was characterized by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). The influence of the multilayer with different number of layers on the drug release rate was studied using thermal gravimetric analysis (TGA) and surface tension measurement. The swelling effect and the structure changes of the multilayer were investigated to explore the relationship between the drug release behavior and the state of the multilayer under different pH conditions. The stability and mucosa adhesive ability of the prepared nanoparticles were also explored. After multilayer coating, the drug release rate was effectively controlled. The differences in drug release behavior under different pH conditions could be attributed to the different states of the multilayer. And the nanoparticles possessed good stability and strong mucosa adhesive ability. We believe that this combination offers a simple strategy for regulating the release rate of poorly water-soluble drugs and extends the pharmaceutical applications of inorganic materials and polymers.

PEGylated mesoporous silica as a redox-responsive drug delivery system for loading thiol-containing drugs

In this paper, we describe the development of a redox-responsive delivery system based on 6-mercaptopurine (6-MP)-conjugated colloidal mesoporous silica (CMS) via disulfide bonds. mPEG was modified on the surface of silica to improve the dispersibility and biocompatiblity of CMS by reducing hemolysis and protein adsorption. The CMS carriers with different amounts of thiol groups were prepared to evaluate the impact of modified thiol on the drug loading efficiency. In vitro release studies demonstrated that the CMS nanoparticles exhibited highly redox-responsive drug release. The cumulative release of 6-MP was less than 3% in absence of GSH, and reached more than 70% within 2h in the presence of 3mM GSH. In addition, by comparing the cumulative release profiles of CMS-SS-MP@mPEG with their counterparts without the grafting of hydrophilic PEG, it was found that mPEG chains did not hinder the drug release due to the cleavable disulfide bonds and the improved dispersibility. Overall, this work provides a new strategy to connect thiol-containing/thiolated drugs and hydrophilic polymers to the interior and exterior of silica via disulfide bonds to obtain redox-responsive release and improve the dispersibility and biocompatibility of silica.