R.A. Pitts

Chapter 4: Power and particle control

Progress, since the ITER Physics Basis publication (ITER Physics Basis Editors et al 1999 Nucl. Fusion 39 2137–2664), in understanding the processes that will determine the properties of the plasma edge and its interaction with material elements in ITER is described. Experimental areas where significant progress has taken place are energy transport in the scrape-off layer (SOL) in particular of the anomalous transport scaling, particle transport in the SOL that plays a major role in the interaction of diverted plasmas with the main-chamber material elements, edge localized mode (ELM) energy deposition on material elements and the transport mechanism for the ELM energy from the main plasma to the plasma facing components, the physics of plasma detachment and neutral dynamics including the edge density profile structure and the control of plasma particle content and He removal, the erosion of low- and high-Z materials in fusion devices, their transport to the core plasma and their migration at the plasma edge including the formation of mixed materials, the processes determining the size and location of the retention of tritium in fusion devices and methods to remove it and the processes determining the efficiency of the various fuelling methods as well as their development towards the ITER requirements. This experimental progress has been accompanied by the development of modelling tools for the physical processes at the edge plasma and plasma–materials interaction and the further validation of these models by comparing their predictions with the new experimental results. Progress in the modelling development and validation has been mostly concentrated in the following areas: refinement in the predictions for ITER with plasma edge modelling codes by inclusion of detailed geometrical features of the divertor and the introduction of physical effects, which can play a major role in determining the divertor parameters at the divertor for ITER conditions such as hydrogen radiation transport and neutral–neutral collisions, modelling of the ion orbits at the plasma edge, which can play a role in determining power deposition at the divertor target, models for plasma–materials and plasma dynamics interaction during ELMs and disruptions, models for the transport of impurities at the plasma edge to describe the core contamination by impurities and the migration of eroded materials at the edge plasma and its associated tritium retention and models for the turbulent processes that determine the anomalous transport of energy and particles across the SOL. The implications for the expected performance of the reference regimes in ITER, the operation of the ITER device and the lifetime of the plasma facing materials are discussed.

Principal physics developments evaluated in the ITER design review

As part of the ITER Design Review and in response to the issues identified by the Science and Technology Advisory Committee, the ITER physics requirements were reviewed and as appropriate updated. The focus of this paper will be on recent work affecting the ITER design with special emphasis on topics affecting near-term procurement arrangements. This paper will describe results on: design sensitivity studies, poloidal field coil requirements, vertical stability, effect of toroidal field ripple on thermal confinement, material choice and heat load requirements for plasma-facing components, edge localized modes control, resistive wall mode control, disruptions and disruption mitigation.

Progress on the application of ELM control schemes to ITER scenarios from the non-active phase to DT operation

Progress in the definition of the requirements for edge localized mode (ELM) control and the application of ELM control methods both for high fusion performance DT operation and non-active low-current operation in ITER is described. Evaluation of the power fluxes for low plasma current H-modes in ITER shows that uncontrolled ELMs will not lead to damage to the tungsten (W) divertor target, unlike for high-current H-modes in which divertor damage by uncontrolled ELMs is expected. Despite the lack of divertor damage at lower currents, ELM control is found to be required in ITER under these conditions to prevent an excessive contamination of the plasma by W, which could eventually lead to an increased disruptivity. Modelling with the non-linear MHD code JOREK of the physics processes determining the flow of energy from the confined plasma onto the plasma-facing components during ELMs at the ITER scale shows that the relative contribution of conductive and convective losses is intrinsically linked to the magnitude of the ELM energy loss. Modelling of the triggering of ELMs by pellet injection for DIII-D and ITER has identified the minimum pellet size required to trigger ELMs and, from this, the required fuel throughput for the application of this technique to ITER is evaluated and shown to be compatible with the installed fuelling and tritium re-processing capabilities in ITER. The evaluation of the capabilities of the ELM control coil system in ITER for ELM suppression is carried out (in the vacuum approximation) and found to have a factor of ∼2 margin in terms of coil current to achieve its design criterion, although such a margin could be substantially reduced when plasma shielding effects are taken into account. The consequences for the spatial distribution of the power fluxes at the divertor of ELM control by three-dimensional (3D) fields are evaluated and found to lead to substantial toroidal asymmetries in zones of the divertor target away from the separatrix. Therefore, specifications for the rotation of the 3D perturbation applied for ELM control in order to avoid excessive localized erosion of the ITER divertor target are derived. It is shown that a rotation frequency in excess of 1 Hz for the whole toroidally asymmetric divertor power flux pattern is required (corresponding to n Hz frequency in the variation of currents in the coils, where n is the toroidal symmetry of the perturbation applied) in order to avoid unacceptable thermal cycling of the divertor target for the highest power fluxes and worst toroidal power flux asymmetries expected. The possible use of the in-vessel vertical stability coils for ELM control as a back-up to the main ELM control systems in ITER is described and the feasibility of its application to control ELMs in low plasma current H-modes, foreseen for initial ITER operation, is evaluated and found to be viable for plasma currents up to 5–10 MA depending on modelling assumptions.

Status and physics basis of the ITER divertor

The ITER divertor design is the culmination of years of physics and engineering effort, building confidence that this critical component will satisfy the requirements and meet the challenge of burning plasma operation. With 54 cassette assemblies, each weighing ~9 tonnes, nearly 3900 actively cooled high heat flux elements rated to steady-state surface power flux densities of 10 MW m−2 and a total of ~60 000 carbon fibre composite monoblocks and ~260 000 tungsten monoblocks/flat tiles, the ITER divertor will be the largest and most advanced of its kind ever constructed. Both the ITER Design Review and subsequent follow-up activities have led to a number of modifications to the device, including the divertor design, significantly improving ITERs operational flexibility. This paper outlines the salient features of the final divertor design, with emphasis on the physics rationale that has defined the design choices and on the performance of the resulting configuration.

Interchange turbulence in the TCV scrape-off layer

Probe measurements of electrostatic plasma fluctuations in the scrape-off layer (SOL) of the TCV tokamak are compared with the results from two-dimensional interchange turbulence simulations. Excellent agreement is found for both the radial variation of statistical moments and temporal correlations, clearly indicating that turbulent transport in the tokamak SOL is due to radial advection of blob-like filamentary structures. This offers an explanation both for the basic mechanism driving the anomalous SOL particle transport and the now commonly observed broad particle density profiles, extending deep into the SOL and thought to be the cause of high levels of main chamber plasma-wall interactions.

Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation

New experimental results on transient loads during ELMs and disruptions in present divertor tokamaks are described and used to carry out a extrapolation to ITER reference conditions and to draw consequences for its operation. In particular, the achievement of low energy/convective type I edge localized modes (ELMs) in ITER-like plasma conditions seems the only way to obtain transient loads which may be compatible with an acceptable erosion lifetime of plasma facing components (PFCs) in ITER. Power loads during disruptions, on the contrary, seem to lead in most cases to an acceptable divertor lifetime because of the relatively small plasma thermal energy remaining at the thermal quench and the large broadening of the power flux footprint during this phase. These conclusions are reinforced by calculations of the expected erosion lifetime, under these load conditions, which take into account a realistic temporal dependence of the power fluxes on PFCs during ELMs and disruptions.

Material erosion and migration in tokamaks

The issue of first wall and divertor target lifetime represents one of the greatest challenges facing the successful demonstration of integrated tokamak burning plasma operation, even in the case of the planned next step device, ITER, which will run at a relatively low duty cycle in comparison to future fusion power plants. Material erosion by continuous or transient plasma ion and neutral impact, the susbsequent transport of the released impurities through and by the plasma and their deposition and/or eventual re-erosion constitute the process of migration. Its importance is now recognized by a concerted research effort throughout the international tokamak community, comprising a wide variety of devices with differing plasma configurations, sizes and plasma-facing component material. No single device, however, operates with the first wall material mix currently envisaged for ITER, and all are far from the ITER energy throughput and divertor particle fluxes and fluences. This paper aims to review the basic components of material erosion and migration in tokamaks, illustrating each by way of examples from current research and attempting to place them in the context of the next step device. Plans for testing an ITER-like first wall material mix on the JET tokamak will also be briefly outlined.

Fluctuations and transport in the TCV scrape-off layer

Fluctuations and particle transport in the scrape-off layer of TCV plasmas have been investigated by probe measurements and direct comparison with two-dimensional interchange turbulence simulations at the outer midplane. The experiments demonstrate that with increasing line-averaged core plasma density, the radial particle density profile scale length becomes broader. The particle and radial flux density statistics in the far scrape-off layer exhibit a high degree of statistical similarity with respect to changes in the line-averaged density. The plasma flux onto the main chamber wall at the outer midplane scales linearly with the local particle density, suggesting that the particle flux here can be parameterized in terms of an effective convection velocity. Experimental probe measurements also provide evidence for significant parallel flows in the scrape-off layer caused by ballooning in the transport of particles and heat into the scrape-off layer. The magnitude of this flow estimated from pressure fluctuation statistics is found to compare favourably with the measured flow offset derived by averaging data obtained from flow profiles observed in matched forward and reversed field discharges. An interchange turbulence simulation has been performed for a single, relatively high density case, where comparison between code and experiment has been possible. Good agreement is found for almost all aspects of the experimental measurements, indicating that plasma fluctuations and transport in TCV scrape-off layer plasmas are dominated by radial motion of filamentary structures.

Creation and control of variably shaped plasmas in TCV

During the first year of operation, the TCV tokamak has produced a large variety of plasma shapes and magnetic configurations, with 1.0<or=Btor<or=1.46 T, Ip<or=800 kA, kappa <or=2.05, -0.7<or= delta <or=0.7. A new shape control algorithm, based on finite element reconstruction of the plasma current in real time, has been implemented. Vertical growth rates of 800 sec-1 corresponding to a stability margin f=1.15, have been stabilized. Ohmic H-modes, with energy confinement times reaching 80 ms, normalized beta ( beta toraB/Ip) of 1.9 and tau E/ITER89-P of 2.4 have been obtained in single-null X-point deuterium discharges with the ion grad B drift towards the X-point. Limiter H-modes with maximum line averaged electron densities of 1.7*1020m-3 have been observed in D-shaped plasmas with 360 kA<or=Ip<or=600 kA.

Snowflake divertor plasmas on TCV

Starting from a standard single null X-point configuration, a second order null divertor (snowflake (SF)) has been successfully created on the Tokamak a Configuration Variable (TCV) tokamak. The magnetic properties of this innovative configuration have been analysed and compared with a standard X-point configuration. For the SF divertor, the connection length and the flux expansion close to the separatrix exceed those of the standard X-point by more than a factor of 2. The magnetic shear in the plasma edge is also larger for the SF configuration.