Radwanul Hasan Siddique

The role of random nanostructures for the omnidirectional anti-reflection properties of the glasswing butterfly

The glasswing butterfly (Greta oto) has, as its name suggests, transparent wings with remarkable low haze and reflectance over the whole visible spectral range even for large view angles of 80°. This omnidirectional anti-reflection behaviour is caused by small nanopillars covering the transparent regions of its wings. In difference to other anti-reflection coatings found in nature, these pillars are irregularly arranged and feature a random height and width distribution. Here we simulate the optical properties with the effective medium theory and transfer matrix method and show that the random height distribution of pillars significantly reduces the reflection not only for normal incidence but also for high view angles.

Fabrication of hierarchical photonic nanostructures inspired by Morpho butterflies utilizing laser interference lithography

We introduce laser interference lithography (LIL) as a tool to fabricate hierarchical photonic nanostructures inspired by blue Morpho butterflies. For that, we utilize the interference pattern in vertical direction in addition to the conventional horizontal one. The vertical interference creates the lamellae by exploiting the back reflection from the substrate. The horizontal interference patterns the ridges of the hierarchical Christmas tree like structure. The artificial Morpho replica produced with this technique feature a brilliant blue iridescence up to an incident angle of 40°.

Colour formation on the wings of the butterfly Hypolimnas salmacis by scale stacking.

The butterfly genus Hypolimnas features iridescent blue colouration in some areas of its dorsal wings. Here, we analyse the mechanisms responsible for such colouration on the dorsal wings of Hypolimnas salmacis and experimentally demonstrate that the lower thin lamina in the white cover scales causes the blue iridescence. This outcome contradicts other studies reporting that the radiant blue in Hypolimnas butterflies is caused by complex ridge-lamellar architectures in the upper lamina of the cover scales. Our comprehensive optical study supported by numerical calculation however shows that scale stacking primarily induces the observed colour appearance of Hypolimnas salmacis.

Bio-inspired, large scale, highly-scattering films for nanoparticle-alternative white surfaces

Inspired by the white beetle of the genus Cyphochilus, we fabricate ultra-thin, porous PMMA films by foaming with CO2 saturation. Optimising pore diameter and fraction in terms of broad-band reflectance results in very thin films with exceptional whiteness. Already films with 60 µm-thick scattering layer feature a whiteness with a reflectance of 90%. Even 9 µm thin scattering layers appear white with a reflectance above 57%. The transport mean free path in the artificial films is between 3.5 µm and 4 µm being close to the evolutionary optimised natural prototype. The bio-inspired white films do not lose their whiteness during further shaping, allowing for various applications.

Bioinspired phase-separated disordered nanostructures for thin photovoltaic absorbers

Inspired by black butterfly scales, self-assembled phase-separated nanostructures form efficient photovoltaic absorbers. The wings of the black butterfly, Pachliopta aristolochiae, are covered by micro- and nanostructured scales that harvest sunlight over a wide spectral and angular range. Considering that these properties are particularly attractive for photovoltaic applications, we analyze the contribution of these micro- and nanostructures, focusing on the structural disorder observed in the wing scales. In addition to microspectroscopy experiments, we conduct three-dimensional optical simulations of the exact scale structure. On the basis of these results, we design nanostructured thin photovoltaic absorbers of disordered nanoholes, which combine efficient light in-coupling and light-trapping properties together with a high angular robustness. Finally, inspired by the phase separation mechanism of self-assembled biophotonic nanostructures, we fabricate these bioinspired absorbers using a scalable, self-assembly patterning technique based on the phase separation of binary polymer mixture. The nanopatterned absorbers achieve a relative integrated absorption increase of 90% at a normal incident angle of light to as high as 200% at large incident angles, demonstrating the potential of black butterfly structures for light-harvesting purposes in thin-film solar cells.

Multifunctional biophotonic nanostructures inspired by the longtail glasswing butterfly for medical devices

Numerous living organisms possess biophotonic nanostructures that provide colouration and other diverse functions for survival. While such structures have been actively studied and replicated in the laboratory, it remains unclear whether they can be used for biomedical applications. Here, we show a transparent photonic nanostructure inspired by the longtail glasswing butterfly (Chorinea faunus) and demonstrate its use in intraocular pressure (IOP) sensors in vivo. We exploit the phase separation between two immiscible polymers (poly(methyl methacrylate) and polystyrene) to form nanostructured features on top of a Si3N4 substrate. The membrane thus formed shows good angle-independent white-light transmission, strong hydrophilicity and anti-biofouling properties, which prevent adhesion of proteins, bacteria and eukaryotic cells. We then developed a microscale implantable IOP sensor using our photonic membrane as an optomechanical sensing element. Finally, we performed in vivo testing on New Zealand white rabbits, which showed that our device reduces the mean IOP measurement variation compared with conventional rebound tonometry without signs of inflammation.A nanostructured membrane inspired by transparent butterfly wings is used for intraocular pressure sensing in vivo.

Scalable and controlled self-assembly of aluminum-based random plasmonic metasurfaces

Subwavelength metal-dielectric plasmonic metasurfaces enable light management beyond the diffraction limit. However, a cost-effective and reliable fabrication method for such structures remains a major challenge hindering their full exploitation. Here, we propose a simple yet powerful manufacturing route for plasmonic metasurfaces based on a bottom-up approach. The fabricated metasurfaces consist of a dense distribution of randomly oriented nanoscale scatterers composed of aluminum (Al) nanohole-disk pairs, which exhibit angle-independent scattering that is tunable across the entire visible spectrum. The macroscopic response of the metasurfaces is controlled via the properties of an isolated Al nanohole-disk pair at the nanoscale. In addition, the optical field confinement at the scatterers and their random distribution of sizes result in a strongly enhanced Raman signal that enables broadly tunable excitation using a single substrate. This unique combination of a reliable and lithography-free methodology with the use of aluminum permits the exploitation of the full potential of random plasmonic metasurfaces for diagnostics and coloration.

Quantitative analysis of a III-V tapered horn-shaped metal-clad nano-cavity as an on-chip light source

A horn-shaped metal-clad InGaAsP nano-cavity with sloped sidewalls is proposed as a platform for nanoscale light sources. The nano-cavity’s physical dimensions are 350 × 350 × 350 nm^3, and its mode volume is 0.5 (λ_0/n)^3. In our numerical simulations and quantitative analysis, we have shown that the sloped sidewalls reduce metallic absorption and improve resonant mode confinement; and adjusting their slope from 0 to 16° increased the Q factor from 150 to 900 and laser modulation 3dB bandwidth from 4.3 to 36 GHz. The lasing threshold current was expected to be 35 μA at 16°. In a simulated feasibility study, we demonstrate 60 Gbps modulated laser signal (5 fJ/bit), producing 20 μW output power at the 1.5 μm wavelength with injection current 100 μA, as an implementation of horn-shaped nano-cavity platform to the low power and ultra-fast on-chip nano-laser.

Analysis and fabrication of optical active nanostructures inspired by the blue Morpho butterfly

Blue Morpho butterflies are well-known for their blue irradiance. This famous blue reflection originates from nanostructures in the scales of their wings. These optical active structures integrate three design principles leading to the wide angle reflection: alternative lamellae layers, Christmas tree like shape, and zigzag pattern of the ridges. In order to study their individual effects rigorously, 2D FEM simulation of the nanostructures of Morpho sulkowskyi was used to calculate their reflection spectrum. The reflection spectrum is found to be broad (~ 90 nm) for alternating layers and can be controlled by varying the design pattern. The Christmas tree like pattern helps to reduce the directionality of the reflectance. These structures were exactly fabricated by e-beam lithography . Each type covered an area of 500 μm × 500 μm. In contrast to the original butterfly structures they lay flat on the substrate with a height of 200 nm but mimic already all important features of the original Morpho butterfly (Christmas tree like structure with alternating lamellae and offsets between the trees). It is found that our new samples maintain the intense blue characteristics with a wide angular range of reflection (± 25°).