Rafik Addou

Defect-Dominated Doping and Contact Resistance in MoS2

Achieving low resistance contacts is vital for the realization of nanoelectronic devices based on transition metal dichalcogenides. We find that intrinsic defects in MoS2 dominate the metal/MoS2 contact resistance and provide a low Schottky barrier independent of metal contact work function. Furthermore, we show that MoS2 can exhibit both n-type and p-type conduction at different points on a same sample. We identify these regions independently by complementary characterization techniques and show how the Fermi level can shift by 1 eV over tens of nanometers in spatial resolution. We find that these variations in doping are defect-chemistry-related and are independent of contact metal. This raises questions on previous reports of metal-induced doping of MoS2 since the same metal in contact with MoS2 can exhibit both n- and p-type behavior. These results may provide a potential route for achieving low electron and hole Schottky barrier contacts with a single metal deposition.

Near-unity photoluminescence quantum yield in MoS2

Brighter molybdenum layers The confined layers of molybdenum disulphide (MoS2) exhibit photoluminescence that is attractive for optolectronic applications. In practice, efficiencies are low, presumably because defects trap excitons before they can recombine and radiate light. Amani et al. show that treatment of monolayer MoS2 with a nonoxidizing organic superacid, bis(trifluoromethane) sulfonimide, increased luminescence efficiency in excess of 95%. The enhancement mechanism may be related to the shielding of defects, such as sulfur vacancies. Science, this issue p. 1065 Superacid treatment enhances the luminescence efficiency of monolayer molybdenum disulfide from 1% to >95%. Two-dimensional (2D) transition metal dichalcogenides have emerged as a promising material system for optoelectronic applications, but their primary figure of merit, the room-temperature photoluminescence quantum yield (QY), is extremely low. The prototypical 2D material molybdenum disulfide (MoS2) is reported to have a maximum QY of 0.6%, which indicates a considerable defect density. Here we report on an air-stable, solution-based chemical treatment by an organic superacid, which uniformly enhances the photoluminescence and minority carrier lifetime of MoS2 monolayers by more than two orders of magnitude. The treatment eliminates defect-mediated nonradiative recombination, thus resulting in a final QY of more than 95%, with a longest-observed lifetime of 10.8 ± 0.6 nanoseconds. Our ability to obtain optoelectronic monolayers with near-perfect properties opens the door for the development of highly efficient light-emitting diodes, lasers, and solar cells based on 2D materials.

Atomically thin resonant tunnel diodes built from synthetic van der Waals heterostructures

Vertical integration of two-dimensional van der Waals materials is predicted to lead to novel electronic and optical properties not found in the constituent layers. Here, we present the direct synthesis of two unique, atomically thin, multi-junction heterostructures by combining graphene with the monolayer transition-metal dichalcogenides: molybdenum disulfide (MoS2), molybdenum diselenide (MoSe2) and tungsten diselenide (WSe2). The realization of MoS2–WSe2–graphene and WSe2–MoS2–graphene heterostructures leads to resonant tunnelling in an atomically thin stack with spectrally narrow, room temperature negative differential resistance characteristics.

Monolayer graphene growth on Ni(111) by low temperature chemical vapor deposition

In contrast to the commonly employed high temperature chemical vapor deposition growth that leads to multilayer graphene formation by carbon segregation from the bulk, we demonstrate that below 600 °C graphene can be grown in a self-limiting monolayer growth process. Optimum growth is achieved at ∼550 °C. Above this temperature, carbon diffusion into the bulk is limiting the surface growth rate, while at temperatures below ∼500 °C a competing surface carbide phase impedes graphene formation.

Manganese Doping of Monolayer MoS2: The Substrate Is Critical

Substitutional doping of transition metal dichalcogenides (TMDs) may provide routes to achieving tunable p-n junctions, bandgaps, chemical sensitivity, and magnetism in these materials. In this study, we demonstrate in situ doping of monolayer molybdenum disulfide (MoS2) with manganese (Mn) via vapor phase deposition techniques. Successful incorporation of Mn in MoS2 leads to modifications of the band structure as evidenced by photoluminescence and X-ray photoelectron spectroscopy, but this is heavily dependent on the choice of substrate. We show that inert substrates (i.e., graphene) permit the incorporation of several percent Mn in MoS2, while substrates with reactive surface terminations (i.e., SiO2 and sapphire) preclude Mn incorporation and merely lead to defective MoS2. The results presented here demonstrate that tailoring the substrate surface could be the most significant factor in substitutional doping of TMDs with non-TMD elements.

Impurities and Electronic Property Variations of Natural MoS2 Crystal Surfaces

Room temperature X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICPMS), high resolution Rutherford backscattering spectrometry (HR-RBS), Kelvin probe method, and scanning tunneling microscopy (STM) are employed to study the properties of a freshly exfoliated surface of geological MoS2 crystals. Our findings reveal that the semiconductor 2H-MoS2 exhibits both n- and p-type behavior, and the work function as measured by the Kelvin probe is found to vary from 4.4 to 5.3 eV. The presence of impurities in parts-per-million (ppm) and a surface defect density of up to 8% of the total area could explain the variation of the Fermi level position. High resolution RBS data also show a large variation in the MoSx composition (1.8 < x < 2.05) at the surface. Thus, the variation in the conductivity, the work function, and stoichiometry across small areas of MoS2 will have to be controlled during crystal growth in order to provide high quality uniform materials for future device fabrication.

Hole Contacts on Transition Metal Dichalcogenides: Interface Chemistry and Band Alignments

MoOx shows promising potential as an efficient hole injection layer for p-FETs based on transition metal dichalcogenides. A combination of experiment and theory is used to study the surface and interfacial chemistry, as well as the band alignments for MoOx/MoS2 and MoOx/WSe2 heterostructures, using photoelectron spectroscopy, scanning tunneling microscopy, and density functional theory. A Mo(5+) rich interface region is identified and is proposed to explain the similar low hole Schottky barriers reported in a recent device study utilizing MoOx contacts on MoS2 and WSe2.

Impact of intrinsic atomic defects on the electronic structure of MoS2 monolayers.

Monolayer MoS2 is a direct band gap semiconductor which has been recently investigated for low-power field effect transistors. The initial studies have shown promising performance, including a high on/off current ratio and carrier mobility with a high-κ gate dielectric. However, the performance of these devices strongly depends on the crystalline quality and defect morphology of the monolayers. In order to obtain a detailed understanding of the MoS2 electronic device properties, we examine possible defect structures and their impact on the MoS2 monolayer electronic properties, using density functional theory in combination with scanning tunneling microscopy to identify the nature of the most likely defects. Quantitative understanding based on a detailed knowledge of the atomic and electronic structures will facilitate the search of suitable defect passivation techniques. Our results show that S adatoms are the most energetically favorable type of defect and that S vacancies are energetically more favorable than Mo vacancies. This approach may be extended to other transition-metal dichalcogenides (TMDs), thus providing useful insights to optimize TMD-based electronic devices.

Recombination Kinetics and Effects of Superacid Treatment in Sulfur- and Selenium-Based Transition Metal Dichalcogenides

Optoelectronic devices based on two-dimensional (2D) materials have shown tremendous promise over the past few years; however, there are still numerous challenges that need to be overcome to enable their application in devices. These include improving their poor photoluminescence (PL) quantum yield (QY) as well as better understanding of exciton-based recombination kinetics. Recently, we developed a chemical treatment technique using an organic superacid, bis(trifluoromethane)sulfonimide (TFSI), which was shown to improve the quantum yield in MoS2 from less than 1% to over 95%. Here, we perform detailed steady-state and transient optical characterization on some of the most heavily studied direct bandgap 2D materials, specifically WS2, MoS2, WSe2, and MoSe2, over a large pump dynamic range to study the recombination mechanisms present in these materials. We then explore the effects of TFSI treatment on the PL QY and recombination kinetics for each case. Our results suggest that sulfur-based 2D materials are amenable to repair/passivation by TFSI, while the mechanism is thus far ineffective on selenium based systems. We also show that biexcitonic recombination is the dominant nonradiative pathway in these materials and that the kinetics for TFSI treated MoS2 and WS2 can be described using a simple two parameter model.

Atomically thin heterostructures based on single-layer tungsten diselenide and graphene

Heterogeneous engineering of two-dimensional layered materials, including metallic graphene and semiconducting transition metal dichalcogenides, presents an exciting opportunity to produce highly tunable electronic and optoelectronic systems. In order to engineer pristine layers and their interfaces, epitaxial growth of such heterostructures is required. We report the direct growth of crystalline, monolayer tungsten diselenide (WSe2) on epitaxial graphene (EG) grown from silicon carbide. Raman spectroscopy, photoluminescence, and scanning tunneling microscopy confirm high-quality WSe2 monolayers, whereas transmission electron microscopy shows an atomically sharp interface, and low energy electron diffraction confirms near perfect orientation between WSe2 and EG. Vertical transport measurements across the WSe2/EG heterostructure provides evidence that an additional barrier to carrier transport beyond the expected WSe2/EG band offset exists due to the interlayer gap, which is supported by theoretical local density of states (LDOS) calculations using self-consistent density functional theory (DFT) and nonequilibrium Greens function (NEGF).