Raghu V. Maligal-Ganesh

Sub-4 nm PtZn Intermetallic Nanoparticles for Enhanced Mass and Specific Activities in Catalytic Electrooxidation Reaction

Atomically ordered intermetallic nanoparticles (iNPs) have sparked considerable interest in fuel cell applications by virtue of their exceptional electronic and structural properties. However, the synthesis of small iNPs in a controllable manner remains a formidable challenge because of the high temperature generally required in the formation of intermetallic phases. Here we report a general method for the synthesis of PtZn iNPs (3.2 ± 0.4 nm) on multiwalled carbon nanotubes (MWNT) via a facile and capping agent free strategy using a sacrificial mesoporous silica (mSiO2) shell. The as-prepared PtZn iNPs exhibited ca. 10 times higher mass activity in both acidic and basic solution toward the methanol oxidation reaction (MOR) compared to larger PtZn iNPs synthesized on MWNT without the mSiO2 shell. Density functional theory (DFT) calculations predict that PtZn systems go through a non-CO pathway for MOR because of the stabilization of the OH* intermediate by Zn atoms, while a pure Pt system forms highly stable COH* and CO* intermediates, leading to catalyst deactivation. Experimental studies on the origin of the backward oxidation peak of MOR coincide well with DFT predictions. Moreover, the calculations demonstrate that MOR on smaller PtZn iNPs is energetically more favorable than larger iNPs, due to their high density of corner sites and lower-lying energetic pathway. Therefore, smaller PtZn iNPs not only increase the number but also enhance the activity of the active sites in MOR compared with larger ones. This work opens a new avenue for the synthesis of small iNPs with more undercoordinated and enhanced active sites for fuel cell applications.

Intermetallic NaAu2 as a Heterogeneous Catalyst for Low-Temperature CO Oxidation

The enhanced stability and modified electronic structure of intermetallic compounds provide discovery of superior catalysts for chemical conversions with high activity, selectivity, and stability. We find that the intermetallic NaAu2 is an active catalyst for CO oxidation at low temperatures. From density functional theory calculations, a reaction mechanism is suggested to explain the observed low reaction barrier of CO oxidation by NaAu2, in which a CO molecule reacts directly with an adsorbed O2 to form an OOCO* intermediate. The presence of surface Na increases the binding energy of O2 and decreases the energy barrier of the transition states.

High‐Temperature‐Stable and Regenerable Catalysts: Platinum Nanoparticles in Aligned Mesoporous Silica Wells

We report the synthesis, structural characterization, thermal stability study, and regeneration of nanostructured catalysts made of 2.9 nm Pt nanoparticles sandwiched between a 180 nm SiO2 core and a mesoporous SiO2 shell. The SiO2 shell consists of 2.5 nm channels that are aligned perpendicular to the surface of the SiO2 core. The nanostructure mimics Pt nanoparticles that sit in mesoporous SiO2 wells (Pt@MSWs). By using synchrotron-based small-angle X-ray scattering, we were able to prove the ordered structure of the aligned mesoporous shell. By using high-temperature cyclohexane dehydrogenation as a model reaction, we found that the Pt@MSWs of different well depths showed stable activity at 500 °C after the induction period. Conversely, a control catalyst, SiO2 -sphere-supported Pt nanoparticles without a mesoporous SiO2 shell (Pt/SiO2 ), was deactivated. We deliberately deactivated the Pt@MSWs catalyst with a 50 nm deep well by using carbon deposition induced by a low H2 /cyclohexane ratio. The deactivated Pt@MSWs catalyst was regenerated by calcination at 500 °C with 20 % O2 balanced with He. After the regeneration treatments, the activity of the Pt@MSWs catalyst was fully restored. Our results suggest that the nanostructured catalysts-Pt nanoparticles confined inside mesoporous SiO2 wells-are stable and regenerable for treatments and reactions that require high temperatures.

Morphology inherence from hollow MOFs to hollow carbon polyhedrons in preparing carbon-based electrocatalysts

Hollow carbon nanostructures are emerging as advanced electrocatalysts for the oxygen reduction reaction (ORR) due to the effective usage of active sites and the reduced dependence on expensive noble metals. Conventional preparation of these hollow structures is achieved through templates (e.g. SiO2, CdS, and Ni3C), which serve to retain the void interiors during carbonization, leading to an essential template-removal procedure using hazardous chemical etchants. Herein, we demonstrate the direct carbonization of unique hollow zeolitic imidazolate frameworks (ZIFs) for the synthesis of hollow carbon polyhedrons (HCPs) with well-defined morphologies. The hollow ZIF particles behave bi-functionally as a carbon source and a morphology directing agent. This method evidences the strong morphology inherence from the hollow ZIFs during the carbonization, advancing the significant simplicity and environmental friendliness of this synthesis strategy. The as-prepared HCPs show a uniform polyhedral morphology and large void interiors, which enable their superior ORR activity. Iron can be doped into the HCPs (Fe/HCPs), providing the Fe/HCPs with enhanced ORR properties (E1/2 = 0.850 V) in comparison with those of HCPs. We highlight the efficient structural engineering to transform ZIFs into advanced carbon nanostructures accomplishing morphological control and high electrocatalytic activity.

Silica‐Encapsulated Pt‐Sn Intermetallic Nanoparticles: A Robust Catalytic Platform for Parahydrogen‐Induced Polarization of Gases and Liquids

Recently, a facile method for the synthesis of size-monodisperse Pt, Pt3 Sn, and PtSn intermetallic nanoparticles (iNPs) that are confined within a thermally robust mesoporous silica (mSiO2 ) shell was introduced. These nanomaterials offer improved selectivity, activity, and stability for large-scale catalytic applications. Here we present the first study of parahydrogen-induced polarization NMR on these Pt-Sn catalysts. A 3000-fold increase in the pairwise selectivity, relative to the monometallic Pt, was observed using the PtSn@mSiO2 catalyst. The results are explained by the elimination of the three-fold Pt sites on the Pt(111) surface. Furthermore, Pt-Sn iNPs are shown to be a robust catalytic platform for parahydrogen-induced polarization for inu2005vivo magnetic resonance imaging.

Enhanced Chemoselectivity in Pt–Fe@mSiO2 Bimetallic Nanoparticles in the Absence of Surface Modifying Ligands

Noble metal-based bimetallic nanoparticles (NPs) synthesized using colloidal methods always contain organic capping agents. These NPs show high selectivities in many chemoselective hydrogenation reactions benefitting from both capping agents and secondary metals. However, it is challenging to separately identify the role of the secondary metal and the capping agents in the bimetallic NPs because the complete removal of the capping agents can often cause their aggregation or structural/compositional changes. Herein we report the synthesis of Pt5Fex (xu2009=u20091, 2 and 4) bimetallic NPs capped by an inorganic mesoporous silica (mSiO2) shell, which could prevent NP aggregation during high-temperature treatment to remove capping agents. Using these Pt5Fex@mSiO2 NPs with a clean surface, we could demonstrate the role played independently by the bimetallic composition in the selective hydrogenation of cinnamaldehyde and furfural. Understanding the functions of the secondary metal and the surface modifying ligands on the selectivity enhancement of bimetallic NPs is necessary for the design of high-performance chemoselective catalysts.

Conversion of confined metal@ZIF-8 structures to intermetallic nanoparticles supported on nitrogen-doped carbon for electrocatalysis

We report a facile strategy to synthesize intermetallic nanoparticle (iNP) electrocatalysts via one-pot pyrolysis of a zeolitic imidazolate framework, ZIF-8, encapsulating precious metal nanoparticles (NPs). ZIF-8 serves not only as precursor for N-doped carbon (NC), but also as Zn source for the formation of intermetallic or alloy NPs with the encapsulated metals. The resulting sub-4 nm PtZn iNPs embedded in NC exhibit high sintering resistance up to 1,000 °C. Importantly, the present methodology allows fine-tuning of both composition (e.g., PdZn and RhZn iNPs, as well as AuZn and RuZn alloy NPs) and size (2.4, 3.7, and 5.4 nm PtZn) of the as-formed bimetallic NPs. To the best of our knowledge, this is the first report of a metal-organic framework (MOF) with multiple functionalities, such as secondary metal source, carbon precursor, and size-regulating reagent, which promote the formation of iNPs. This work opens a new avenue for the synthesis of highly uniform and stable iNPs.