Raúl Urteaga

Capillary Filling in Nanostructured Porous Silicon

An experimental study on the capillary filling of nanoporous silicon with different fluids is presented. Thin nanoporous membranes were obtained by electrochemical anodization, and the filling dynamics was measured by laser interferometry, taking advantage of the optical properties of the system, related with the small pore radius in comparison to light wavelength. This optical technique is relatively simple to implement and yields highly reproducible data. A fluid dynamic model for the filling process is also proposed including the main characteristics of the porous matrix (tortuosity, average hydraulic radius). The model was tested for different ambient pressures, porous layer morphology, and fluid properties. It was found that the model reproduces well the experimental data according to the different conditions. The predicted pore radii quantitatively agree with the image information from scanning electron microscopy. This technique can be readily used as nanofluidic sensor to determine fluid properties such as viscosity and surface tension of a small sample of liquid. Besides, the whole method can be suitable to characterize a porous matrix.

High-Frequency Digital Lock-In Amplifier Using Random Sampling

A high-frequency digital lock-in amplifier (LIA) that uses a random-sampling scheme is proposed and tested experimentally in this paper. By using this sampling strategy, it is possible to process, without aliasing effects, periodic signals of frequencies that are several times higher than the Nyquist frequency. Analytical and numerical analyses that show the advantages and limitations of the proposed scheme are presented. A high-frequency digital LIA implementation is also described. The prototype maximum sampling frequency is 150 kHz, and its maximum signal frequency without aliasing is 2.5 MHz, limited only by the random-sampling period quantization. Experimental results that validate the proposal are presented.

Optofluidic characterization of nanoporous membranes.

An optofluidic method that accurately identifies the internal geometry of nanochannel arrays is presented. It is based on the dynamics of capillary-driven fluid imbibition, which is followed by laser interferometry. Conical nanochannel arrays in anodized alumina are investigated, which present an asymmetry of the filling times measured from different sides of the membrane. It is demonstrated by theory and experiments that the capillary filling asymmetry only depends on the ratio H of the inlet to outlet pore radii and that the ratio of filling times vary closely as H(7/3). Besides, the capillary filling of conical channels exhibits striking results in comparison to the corresponding cylindrical channels. Apart from these novel results in nanoscale fluid dynamics, the whole method discussed here serves as a characterization technique for nanoporous membranes.

Implementation of a high-frequency digital lock-in amplifier

A high-frequency digital lock-in amplifier that uses non-uniform sampling is proposed and validated experimentally. By using a random sampling strategy, it is possible to process periodic signals of frequencies several times greater than the Nyquist frequency, which is given by the sampling theorem. The implemented instrument, based on a digital signal processor and its associated hardware, is described in this paper. Experimental results show the advantages of the proposed lock-in

Real-time study of protein adsorption kinetics in porous silicon

This paper presents an optical method for real-time monitoring of protein adsorption using porous silicon self-supported microcavities as a label-free detection platform. The study combines an experimental approach with a physical model for the adsorption process. The proposed model agrees well with experimental observations, and provides information about the kinetics of diffusion and adsorption of proteins within the pores, which will be useful for future experimental designs.

Analytical study of the acoustic field in a spherical resonator for single bubble sonoluminescence

The acoustic field in the liquid within a spherical solid shell is calculated. The proposed model takes into account Stokes wave equation in the viscous fluid, the membrane theory to describe the solid shell motion and the energy loss through the external couplings of the system. A point source at the resonator center is included to reproduce the acoustic emission of a sonoluminescence bubble. Particular calculations of the resulting acoustic field are performed for viscous liquids of interest in single bubble sonoluminescence. The model reveals that in case of radially symmetric modes of low frequency, the quality factor is mainly determined by the acoustic energy flowing through the mechanical coupling of the resonator. Alternatively, for high frequency modes the quality factor is mainly determined by the viscous dissipation in the liquid. Furthermore, the interaction between the bubble acoustic emission and the resonator modes is analyzed. It was found that the bubble acoustic emission produces local maxima in the resonator response. The calculated amplitudes and relative phases of the harmonics constituting the bubble acoustic environment can be used to improve multi-frequency driving in sonoluminescence.

Enhanced photoconductivity and fine response tuning in nanostructured porous silicon microcavities

We used light confinement in optical microcavities to achieve a strong enhancement and a precise wavelength tunability of the electrical photoconductance of nanostructured porous silicon (PS). The devices consist of a periodic array of alternating PS layers, electrochemically etched to have high and low porosities – and therefore distinct dielectric functions. A central layer having a doubled thickness breaks up the symmetry of the one-dimensional photonic structure, producing a resonance in the photonic band gap that is clearly observed in the reflectance spectrum. The devices were transferred to a glass coated with a transparent SnO2 electrode, while an Al contact was evaporated on its back side. The electrical conductance was measured as a function of the photon energy. A strong enhancement of the conductance is obtained in a narrow (17nm FWHM) band peaking at the resonance. We present experimental results of the angular dependence of this photoconductance peak energy, and propose an explanation of the conductivity behaviour supported by calculations of the internal electromagnetic field. These devices are promising candidates for finely tuned photoresistors with potential application as chemical sensors and biosensors.

Software PLL Based on Random Sampling

This paper presents and analyzes a phase-locked loop (PLL) based on digital signal processing (DSP) and random sampling (RS). Traditional DSP techniques based on uniform sampling require sampling at more than twice the PLL frequency to avoid spectrum aliasing. This requirement makes difficult the implementation of high-frequency software-based PLLs. RS techniques allow significantly reducing the sampling speed requirements without aliasing effects. Lower speed requirements in the analog-to-digital converter (ADC) and the processing device enable the implementation of software PLLs for much higher frequencies than traditional techniques. The proposed PLL is mathematically analyzed to describe its operation and characterize its performance. A field-programmable gate array (FPGA)-based PLL prototype is presented to validate the theoretical analysis.

Experimental study of transient paths to the extinction in sonoluminescence

An experimental study of the extinction threshold of single bubble sonoluminescence in an air-water system is presented. Different runs from 5% to 100% of air concentrations were performed at room pressure and temperature. The intensity of sonoluminescence (SL) and time of collapse (t(c)) with respect to the driving were measured while the acoustic pressure was linearly increased from the onset of SL until the bubble extinction. The experimental data were compared with theoretical predictions for shape and position instability thresholds. It was found that the extinction of the bubble is determined by different mechanisms depending on the air concentration. For concentrations greater than approximately 30%-40% with respect to the saturation, the parametric instability limits the maximum value of R(0) that can be reached. On the other hand, for lower concentrations, the extinction appears as a limitation in the time of collapse. Two different mechanisms emerge in this range, i.e., the Bjerknes force and the Rayleigh-Taylor instability. The bubble acoustic emission produces backreaction on the bubble itself. This effect occurs in both mechanisms and is essential for the correct prediction of the extinction threshold in the case of low air dissolved concentration.

Design keys for paper-based concentration gradient generators

The generation of concentration gradients is an essential operation for several analytical processes implemented on microfluidic paper-based analytical devices. The dynamic gradient formation is based on the transverse dispersion of chemical species across co-flowing streams. In paper channels, this transverse flux of molecules is dominated by mechanical dispersion, which is substantially different than molecular diffusion, which is the mechanism acting in conventional microchannels. Therefore, the design of gradient generators on paper requires strategies different from those used in traditional microfluidics. This work considers the foundations of transverse dispersion in porous substrates to investigate the optimal design of microfluidic paper-based concentration gradient generators (μPGGs) by computer simulations. A set of novel and versatile μPGGs were designed in the format of numerical prototypes, and virtual experiments were run to explore the ranges of operation and the overall performance of such devices. Then physical prototypes were fabricated and experimentally tested in our lab. Finally, some basic rules for the design of optimized μPGGs are proposed. Apart from improving the efficiency of mixers, diluters and μPGGs, the results of this investigation are relevant to attain highly controlled concentration fields on paper-based devices.