Regina Maria Puppin Rontani

Identificação do lado de preferência mastigatória através de exame eletromiográfico comparado ao visual

The objective of this study was to verify the frequency of masticatory preferential side using electromyography exam compared to the visual inspection. The sample was comprised by 29 healthy students aged 18 to 25 years, of both sexes, from Araras School of Dentistry-UNIARARAS, Brazil, selected following approach: complete permanent dentition, except third molars, with no clinical signs of the temporomandibular dysfunction or periodontal disease. The electromyography analysis was accomplished in the right and left masseter muscles during habitual mastication of carrot and Parafilm. It was considered as presence on a masticatory preferential side and unilateral mastication when the muscular contraction width values obtained in RMS (Root Mean Square) has had at least 20% as a difference between the right and left masseter muscles. The visual inspection was carried out during the electromyography data acquisitions by only one observer. He determined the masticatory preferential side taking account the number of masticatory cycles developed by each side. The masticatory preferential side was considered when 30% of the cycles were developed in only one side after the registration of 20 consecutive masticatory cycles. Of the total sample, 82.8% (24/29) and 72.4% (21/29) exhibited a preferential masticatory side during habitual carrot and Parafilm mastication, respectively. The concordance level between the electromyography and visual inspection exams was 83% of the total observations. It could be concluded that most of the subjects examined in this study exhibited a masticatory preferential side and that the electromyography can be used as a parameter for the masticatory side detection.

Bond strength between fiber posts and composite resin core: influence of temperature on silane coupling agents

This study evaluated the effect of air drying temperature and different silane coupling agents on the bond strength between glass fiber posts and composite resin core. The post surface was cleaned with alcohol and treated with different silane coupling agents, being three prehydrolyzed silanes [Silano (Angelus), Prosil (FGM), RelyX Ceramic Primer (3M ESPE)] and one two-component silane [Silane Coupling Agent (Dentsply)]. Two post-silanization air drying temperatures, 23ºC and 60ºC, were applied. A cylindrical plastic matrix was placed around the silanized post and filled with composite resin. Each bonded post provided 7 slices for push-out testing. Each slice was loaded to failure under compression at a cross-head speed of 0.5 mm/min. Data were analyzed by two-way ANOVA and Scott-Knott tests (α=0.05). Dunnetts test was used to compare the mean of the control group with that of each experimental group. Scanning electron microscopy (SEM) was used to evaluate the interface of the fractured slices. For the 23ºC air drying temperature, the use of RelyX Ceramic Primer resulted in significantly lower bond strength than the other silane coupling agents, while the bond strength with Silane Coupling Agent was the highest of all groups. Only with Silane Coupling Agent, the bond strength for the 23ºC air drying temperature was significantly higher than that for 60ºC air drying. In conclusion, the use of warm air drying after silane application produced no increase in the bond strength between the fiber-reinforced composite post and the composite core. The two-component silane produced higher bond strength than all prehydrolyzed silanes when it was used with air drying at room temperature.

NaOCl effects on primary and permanent pulp chamber dentin

OBJECTIVES The dentin quality of primary and permanent pulp chamber was inspected by Fourier-transformed Raman spectroscopy (FT-Raman) and scanning electron microscopy (SEM). Fragments of pulp chamber dentin were obtained from 20 human molar crowns (primary and permanent). METHODS The fragments were assigned to 8 groups (n=5)-Primary teeth: G1, pulp chamber dentin; G2, pulp chamber dentin irrigated with NaOCl 1% (30 min); G3, pulp chamber dentin irrigated with NaOCl 1% (30 min) and etched by 35% phosphoric acid; G4, pulp chamber dentin etched by 35% phosphoric acid. Permanent teeth: G5, pulp chamber dentin; G6, pulp chamber dentin irrigated with NaOCl 1% (30 min); G7, pulp chamber dentin irrigated with NaOCl 1% (30 min) and etched by 35% phosphoric acid; G8, pulp chamber dentin etched by 35% phosphoric acid. The spectra were subjected to the Cluster analysis. The SEM images were scored. RESULTS Inorganic content: There was a difference between primary and permanent dentin. The groups treated with NaOCl were statistically similar between them, but differed from the groups not treated. Organic content: There was no difference between primary and permanent dentin. The groups became similar after NaOCl and phosphoric acid treatments. The microscopic images showed the presence of calcospherites on permanent dentin and their absence on primary dentin. CONCLUSIONS The NaOCl changed the inorganic content in both dentitions; regardless of the following phosphoric acid etching. However, the chemical changes caused by NaOCl were not detected by SEM when it was followed by etching.

Effect of Different In Vitro Aging Methods on Color Stability of a Dental Resin‐Based Composite Using CIELAB and CIEDE2000 Color‐Difference Formulas

PURPOSE To evaluate the effect of different in vitro aging methods on color change (CC) of an experimental dental resin-based composite using CIELAB (ΔEab ) and CIEDE2000 (ΔE00 ) color-difference formulas. MATERIALS AND METHODS The CC was evaluated with a spectrophotometer (CM700d, Konica Minolta, Tokyo, Japan) according to the CIE chromatic space. Disk-shaped specimens (Φ = 5 × 1 mm thick) (N = 10) were submitted to different in vitro aging methods: 30 days of water aging (WA); 120 hours of ultraviolet light aging (UVA); or 300 hours of an accelerated artificial aging (AAA) method with cycles of 4 hours of UV-B light exposure and 4 hours of moisture condensation to induce CC. The temperature was standardized at 37°C for all aging methods. CC was evaluated with ΔEab and ΔE00 formulas. Differences in individual Lab coordinates were also calculated. Data for the individual color parameters were submitted to one-way analysis of variance and Tukeys test for multiple comparisons (α = 0.05). RESULTS All in vitro aging methods tested induced CC, in the following order: WA: ΔEab = 0.83 (0.1); ΔE00  = 1.15 (0.1) < AAA: ΔEab  = 5.64 (0.2); ΔE00  = 5.01 (0.1) < UVA: ΔEab  = 6.74 (0.2); ΔE00  = 6.03 (0.4). No changes in L* or a* coordinates were ≥1; the methods with UV aging showed a yellowing effect due a large positive change in b*. CONCLUSIONS All in vitro aging methods tested induced a CC, but to different extents. Changes in color followed similar trends, but with different absolute values when calculated with the CIELAB and the CIEDE2000 formulas. CLINICAL SIGNIFICANCE Establishing the efficacy of different artificial aging methods and differences between color change using CIELAB and CIEDE2000 formulas are important to standardize color stability evaluations and facilitate the comparison of outcomes from different studies in the literature.

Secretome Profiling of Periodontal Ligament from Deciduous and Permanent Teeth Reveals a Distinct Expression Pattern of Laminin Chains.

It has been suggested that there are histological and functional distinctions between the periodontal ligament (PDL) of deciduous (DecPDL) and permanent (PermPDL) teeth. Thus, we hypothesized that DecPDL and PermPDL display differences in the constitutive expression of genes/proteins involved with PDL homeostasis. Primary PDL cell cultures were obtained for DecPDL (n = 3) and PermPDL (n = 3) to allow us to perform label-free quantitative secretome analysis. Although a highly similar profile was found between DecPDL and PermPDL cells, comparative secretome analysis evidenced that one of the most stickling differences involved cell adhesion molecules, including laminin subunit gamma 1 (LAMC1) and beta 2 (LAMB2). Next, total RNA and protein extracts were obtained from fresh PDL tissues of deciduous (n = 6) and permanent (n = 6) teeth, and Western blotting and qPCR analysis were used to validate our in vitro findings. Western blot analysis confirmed that LAMC1 was increased in DecPDL fresh tissues (p<0.05). Furthermore, qPCR data analysis revealed that mRNA levels for laminin subunit beta 1 (LAMB1), beta 3 (LAMB3), LAMC1, and gamma 2 (LAMC2) were higher in DecPDL fresh tissues, whereas transcripts for LAMB2 were increased in PermPDL (p<0.05). In conclusion, the differential expression of laminin chains in DecPDL and PermPDL suggests an involvement of laminin-dependent pathways in the control of physiological differences between them.

Effects of resin luting agents and 1% NaOCl on the marginal fit of indirect composite restorations in primary teeth

Objective The purpose of this study was to provide information regarding the marginal adaptation of composite resin onlays in primary teeth previously treated with 1% sodium hypochlorite (NaOCl) (pulp irrigant) using two different resin luting agents. Material and Methods Forty extracted sound primary molars had their crowns prepared in a standardized machine and were randomly divided into 4 groups (n=10): G1 (1% NaOCl irrigation+EnForce); G2 (EnForce); G3 (1% NaOCl irrigation+Rely X); G4 (Rely X). The onlays were made with Z250 composite resin on plaster models. After luting, the tooth/restoration set was stored in 100% relative humidity at 37ºC for 24 h and finished with Soflex discs. Caries Detector solution was applied at the tooth/restoration interface for 5 s. The specimens were washed and four digital photos of each tooth were then taken. The extents of the gaps were measured with Image Tool 3.0 software. The percentage data were submitted to a Kruskal-Wallis test (α=0.05). The Relative Risk test analyzed the chance of a gap presence correlated to each group. Results There were no statistically significant differences (p>0.05) among the groups. The relative risk test revealed that some groups were more apt to have a presence of gaps than others. Conclusion Neither the 1% NaOCl treatment nor the resin luting agents caused any alterations in the dental substrate that could have influenced the marginal adaptation of composite onlays in primary teeth.