Régis Peytavi

Vancomycin-modified nanoparticles for efficient targeting and preconcentration of Gram-positive and Gram-negative bacteria.

A series of vancomycin-modified nanoparticles were developed and employed in magnetic confinement assays to isolate a variety of Gram-positive and Gram-negative bacteria from aqueous solution. We determined that the orientation/architecture of vancomycin on the surface of the nanoparticles and the overall surface coverage is critical in mediating fast and effective interactions between the nanoparticle and the pathogen cell wall surface and only one orientation/architecture in a series of modified nanoparticles leads to the efficient and reproducible capture of several important pathogenic bacteria. Interestingly, as the nanoparticles increase in diameter (from approximately 50 to 2800 nm), it is necessary to incorporate a long linker between the nanoparticle surface and the vancomycin moiety in order for the surface bound probe to efficiently confine Gram-positive bacteria. Finally, we also determined that the time required for efficient labeling and subsequent magnetic confinement significantly decreases as the size of the nanoparticle and the vancomycin surface coverage on the nanoparticle increases. As disease detection technologies transition to lab-on-a-chip based platforms it is necessary to develop strategies to effectively and inexpensively preconcentrate cells from large volume to volumes more amenable to these types of microfluidic devices. These small molecule-modified superparamagnetic nanoparticles can provide a means by which this can be accomplished.

Serial siphon valving for centrifugal microfluidic platforms

Today, the focus in microfluidic platforms for diagnostics is on the integration of several analysis steps toward sample-to-answer systems. One of the main challenges to integration is the requirement for serial valving to allow the sequential release of fluids in a temporally and spatially controlled manner. The advantages offered by centrifugal microfluidic platforms make them excellent candidates for integration of biological analysis steps, yet they are limited by the lack of robust serial valving technologies. This is especially true for the majority of centrifugal microfluidic devices that rely on hydrophilic surfaces, where few passive serial valving techniques function reliably. Building on the useful functionality of centrifugal microfluidic siphoning previously shown, a novel serial siphon valve is introduced that relies on multiple, inline siphons to provide for a better controlled, sequential release of fluids. The introduction of this novel concept is followed by an analytical analysis of the device. Proof-of-concept is also demonstrated, and examples are provided to illustrate the range of functionality of the serial siphon valve. The serial siphon is shown to be robust and reproducible, with variability caused by the dependence on contact angle, rotation velocity, and fluidic properties (viz., surface tension) significantly reduced compared to current microfluidic, centrifugal serial valving technologies.

Surface modification of thermoplastics—towards the plastic biochip for high throughput screening devices

Microarrays have become one of the most convenient tools for high throughput screening, supporting major advances in genomics and proteomics. Other important applications can be found in medical diagnostics, detection of biothreats, drug discovery, etc. Integration of microarrays with microfluidic devices can be highly advantageous in terms of portability, shorter analysis time and lower consumption of expensive biological analytes. Since fabrication of microfluidic devices using traditional materials such as glass is rather expensive, there is great interest in employing polymeric materials as a low cost alternative that is suitable for mass production. A number of commercially available plastic materials were reviewed for this purpose and poly(methylmethacrylate) Zeonor 1060R and Zeonex E48R were identified as promising candidates, for which methods for surface modification and covalent immobilization of DNA oligonucleotides were developed. In addition, we present proof-of-concept plastic-based microarrays with and without integration with microfluidics.

Detection of target DNA using fluorescent cationic polymer and peptide nucleic acid probes on solid support

BackgroundNucleic acids detection using microarrays requires labelling of target nucleic acids with fluorophores or other reporter molecules prior to hybridization.ResultsUsing surface-bound peptide nucleic acids (PNA) probes and soluble fluorescent cationic polythiophenes, we show a simple and sensitive electrostatic approach to detect and identify unlabelled target nucleic acid on microarray.ConclusionThis simple methodology opens exciting possibilities for applied genetic analysis for the diagnosis of infections, identification of genetic mutations, and forensic inquiries. This electrostatic strategy could also be used with other nucleic acid detection methods such as electrochemistry, silver staining, metallization, quantum dots, or electrochemical dyes.

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5 end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5 end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5 overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.

A multiplexed immunoassay system based upon reciprocating centrifugal microfluidics

A novel, centrifugal disk-based micro-total analysis system (μTAS) for low cost and high throughput semi-automated immunoassay processing was developed. A key innovation in the disposable immunoassay disk design is in a fluidic structure that enables very efficient micro-mixing based on a reciprocating mechanism in which centrifugal acceleration acting upon a liquid element first generates and stores pneumatic energy that is then released by a reduction of the centrifugal acceleration, resulting in a reversal of direction of flow of the liquid. Through an alternating sequence of high and low centrifugal acceleration, the system reciprocates the flow of liquid within the disk to maximize incubation/hybridization efficiency between antibodies and antigen macromolecules during the incubation/hybridization stage of the assay. The described reciprocating mechanism results in a reduction in processing time and reagent consumption by one order of magnitude.

Internal Control for Nucleic Acid Testing Based on the Use of Purified Bacillus atrophaeus subsp. globigii Spores

Commonly used internal controls (ICs) to monitor the efficiency of nucleic acid testing (NAT) assays do not allow verification of nucleic acid extraction efficiency. Since microbial cells are often difficult to lyse, it is important to ensure that nucleic acids are efficiently extracted from any target organism. For this purpose, we developed a cellular IC based on the use of nonpathogenic Bacillus spores. Purified Bacillus atrophaeus subsp. globigii (referred to hereafter as simply B. atrophaeus) spores were added to vaginal and anal samples, which were then subjected to rapid DNA extraction and subsequent PCR amplification. The proof of concept of this cellular IC was made through the use of both manual and automated DNA extraction methods, using vaginal or anal samples spiked with B. atrophaeus spores, combined with a multiplex real-time PCR assay for the specific detection of group B streptococci (GBS) and B. atrophaeus. The performance of the cellular IC was compared to that of a standard IC plasmid added to PCRs. Approximately 500 B. atrophaeus spores per PCR was found to be optimal since this did not interfere significantly with GBS detection for either DNA extraction method and yielded reproducible amplification and/or detection of B. atrophaeus genomic DNA serving as an IC template. Performance of the cellular IC was comparable to that of the standard IC. This novel IC system using nonpathogenic and hard-to-lyse B. atrophaeus spores allowed validation of both the DNA extraction procedure and the amplification and detection process. Use of a spore-based control also provides a universal control for microbial cell lysis.

Amplification Strategy Using Aggregates of Ferrocene-Containing Cationic Polythiophene for Sensitive and Specific Electrochemical Detection of DNA

We report a new electrochemical amplification strategy for an ultrasensitive electrochemical detection of DNA sequences using aggregates composed of a water-soluble, ferrocene-functionalized polythiophene. A two-step hybridization is performed at one addressing surface with PNA capture probes whereas the electrochemical detection is done on an electrode nearby. Specific and quantitative detection of DNA targets with a detection limit of 4 × 10(-16) M (about 4 zeptomoles or about 2500 copies of oligonucleotides) was achieved.

Plastic Polymers for Efficient DNA Microarray Hybridization: Application to Microbiological Diagnostics

ABSTRACT Fabrication of microarray devices using traditional glass slides is not easily adaptable to integration into microfluidic systems. There is thus a need for the development of polymeric materials showing a high hybridization signal-to-background ratio, enabling sensitive detection of microbial pathogens. We have developed such plastic supports suitable for highly sensitive DNA microarray hybridizations. The proof of concept of this microarray technology was done through the detection of four human respiratory viruses that were amplified and labeled with a fluorescent dye via a sensitive reverse transcriptase PCR (RT-PCR) assay. The performance of the microarray hybridization with plastic supports made of PMMA [poly(methylmethacrylate)]-VSUVT or Zeonor 1060R was compared to that with high-quality glass slide microarrays by using both passive and microfluidic hybridization systems. Specific hybridization signal-to-background ratios comparable to that obtained with high-quality commercial glass slides were achieved with both polymeric substrates. Microarray hybridizations demonstrated an analytical sensitivity equivalent to approximately 100 viral genome copies per RT-PCR, which is at least 100-fold higher than the sensitivities of previously reported DNA hybridizations on plastic supports. Testing of these plastic polymers using a microfluidic microarray hybridization platform also showed results that were comparable to those with glass supports. In conclusion, PMMA-VSUVT and Zeonor 1060R are both suitable for highly sensitive microarray hybridizations.

Rapid and automated sample preparation for nucleic acid extraction on a microfluidic CD (compact disk)

Rapid and automated preparation of PCR (polymerase chain reaction)-ready genomic DNA was demonstrated on a multiplexed CD (compact disk) platform by using hard-to-lyse bacterial spores. Cell disruption is carried out while beadcell suspensions are pushed back and forth in center-tapered lysing chambers by angular oscillation of the disk - keystone effect. During this lysis period, the cell suspensions are securely held within the lysing chambers by heatactivated wax valves. Upon application of a remote heat to the disk in motion, the wax valves release lysate solutions into centrifuge chambers where cell debris are separated by an elevated rotation of the disk. Only debris-free DNA extract is then transferred to collection chambers by capillary-assisted siphon and collected for heating that inactivates PCR inhibitors. Lysing capacity was evaluated using a real-time PCR assay to monitor the efficiency of Bacillus globigii spore lysis. PCR analysis showed that 5 minutes CD lysis run gave spore lysis efficiency similar to that obtained with a popular commercial DNA extraction kit (i.e., IDI-lysis kit from GeneOhm Sciences Inc.) which is highly efficient for microbial cell and spore lysis. This work will contribute to the development of an integrated CD-based assay for rapid diagnosis of infectious diseases.