Renhao Dong

Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical Overall‐Water‐Splitting Activity

To achieve sustainable production of H2 fuel through water splitting, low-cost electrocatalysts for the hydrogen-evolution reaction (HER) and the oxygen-evolution reaction (OER) are required to replace Pt and IrO2 catalysts. Herein, for the first time, we present the interface engineering of novel MoS2 /Ni3 S2 heterostructures, in which abundant interfaces are formed. For OER, such MoS2 /Ni3 S2 heterostructures show an extremely low overpotential of ca. 218 mV at 10 mA cm(-2) , which is superior to that of the state-of-the-art OER electrocatalysts. Using MoS2 /Ni3 S2 heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10 mA cm(-2) at a very low cell voltage of ca. 1.56 V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen-containing intermediates, thus accelerating the overall electrochemical water splitting.

Molecular metal-N-x centres in porous carbon for electrocatalytic hydrogen evolution

Replacement of precious platinum with efficient and low-cost catalysts for electrocatalytic hydrogen evolution at low overpotentials holds tremendous promise for clean energy devices. Here we report a novel type of robust cobalt–nitrogen/carbon catalyst for the hydrogen evolution reaction (HER) that is prepared by the pyrolysis of cobalt–N4 macrocycles or cobalt/o-phenylenediamine composites and using silica colloids as a hard template. We identify the well-dispersed molecular CoNx sites on the carbon support as the active sites responsible for the HER. The CoNx/C catalyst exhibits extremely high turnover frequencies per cobalt site in acids, for example, 0.39 and 6.5 s−1 at an overpotential of 100 and 200 mV, respectively, which are higher than those reported for other scalable non-precious metal HER catalysts. Our results suggest the great promise of developing new families of non-precious metal HER catalysts based on the controlled conversion of homogeneous metal complexes into solid-state carbon catalysts via economically scalable protocols.

Transparent Conductive Electrodes from Graphene/PEDOT:PSS Hybrid Inks for Ultrathin Organic Photodetectors

A novel solution fabrication of large-area, highly conductive graphene films by spray-coating of a hybrid ink of exfoliated graphene (EG)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (PH1000) is demonstrated. The fabricated graphene films exhibit excellent mechanical properties, thus enabling their application as bottom electrodes in ultrathin organic photodetector devices with performance comparable to that of the state-of-the-art Si-based inorganic photodetectors.

Large-area, free-standing, two-dimensional supramolecular polymer single-layer sheets for highly efficient electrocatalytic hydrogen evolution.

The rational construction of covalent or noncovalent organic two-dimensional nanosheets is a fascinating target because of their promising applications in electronics, membrane technology, catalysis, sensing, and energy technologies. Herein, a large-area (square millimeters) and free-standing 2D supramolecular polymer (2DSP) single-layer sheet (0.7-0.9 nm in thickness), comprising triphenylene-fused nickel bis(dithiolene) complexes has been readily prepared by using the Langmuir-Blodgett method. Such 2DSPs exhibit excellent electrocatalytic activities for hydrogen generation from water with a Tafel slope of 80.5 mV decade(-1) and an overpotential of 333 mV at 10 mA cm(-2) , which are superior to that of recently reported carbon nanotube supported molecular catalysts and heteroatom-doped graphene catalysts. This work is promising for the development of novel free-standing organic 2D materials for energy technologies.

Organic Radical-Assisted Electrochemical Exfoliation for the Scalable Production of High-Quality Graphene.

Despite the intensive research efforts devoted to graphene fabrication over the past decade, the production of high-quality graphene on a large scale, at an affordable cost, and in a reproducible manner still represents a great challenge. Here, we report a novel method based on the controlled electrochemical exfoliation of graphite in aqueous ammonium sulfate electrolyte to produce graphene in large quantities and with outstanding quality. Because the radicals (e.g., HO(•)) generated from water electrolysis are responsible for defect formation on graphene during electrochemical exfoliation, a series of reducing agents as additives (e.g., (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO), ascorbic acid, and sodium borohydride) have been investigated to eliminate these radicals and thus control the exfoliation process. Remarkably, TEMPO-assisted exfoliation results in large graphene sheets (5-10 μm on average), which exhibit outstanding hole mobilities (∼405 cm(2) V(-1) s(-1)), very low Raman I(D)/I(G) ratios (below 0.1), and extremely high carbon to oxygen (C/O) ratios (∼25.3). Moreover, the graphene ink prepared in dimethylformamide can exhibit concentrations as high as 6 mg mL(-1), thus qualifying this material for intriguing applications such as transparent conductive films and flexible supercapacitors. In general, this robust method for electrochemical exfoliation of graphite offers great promise for the preparation of graphene that can be utilized in industrial applications to create integrated nanocomposites, conductive or mechanical additives, as well as energy storage and conversion devices.

Engineering water dissociation sites in MoS2 nanosheets for accelerated electrocatalytic hydrogen production

Earth-abundant MoS2 is widely reported as a promising HER electrocatalyst in acidic solutions, but it exhibits extremely poor HER activities in alkaline media due to the slow water dissociation process. Here we present a combined theoretical and experimental approach to improve the sluggish HER kinetics of MoS2 electrocatalysts through engineering the water dissociation sites by doping Ni atoms into MoS2 nanosheets. The Ni sites thus introduced can effectively reduce the kinetic energy barrier of the initial water-dissociation step and facilitate the desorption of the −OH that are formed. As a result, the developed Ni-doped MoS2 nanosheets (Ni-MoS2) show an extremely low HER overpotential of ∼98 mV at 10 mA cm−2 in 1 M KOH aqueous solution, which is superior to those (>220 mV at 10 mA cm−2) of reported MoS2 electrocatalysts.

Controlled Synthesis of N‐Doped Carbon Nanospheres with Tailored Mesopores through Self‐Assembly of Colloidal Silica

Limited strategies have been established to prepare monodisperse mesoporous carbon nanospheres (MCNs) with tailored pore sizes. In this work, a method is reported to synthesize MCNs by combining polymerization of aniline with co-assembly of colloidal silica nanoparticles. The controlled self-assembly behavior of colloidal silica enables the formation of uniform composite nanospheres and convenient modulation over mesopores. After carbonization and removal of sacrificial templates, the resultant MCNs possess tunable mesopores (7-42 nm) and spherical diameters (90-300 nm), as well as high surface area (785-1117 m(2)  g(-1) ), large pore volume (1.46-2.01 cm(3)  g(-1) ) and abundant nitrogen moieties (5.54-8.73 at %). When serving as metal-free electrocatalysts for the oxygen reduction reaction (ORR), MCNs with an optimum pore size of 22 nm, compared to those with 7 and 42 nm, exhibit the best ORR performance in alkaline medium.

Hierarchical Transition‐Metal Dichalcogenide Nanosheets for Enhanced Electrocatalytic Hydrogen Evolution

Hierarchical transition-metal dichalcogenide nanosheets are constructed through a versatile strategy, where the thermal polymerization of melamine and subsequent decomposition of carbon nitride successively guide the horizontal and vertical growths of transition-metal chalcogenides. Abundant edges and high surface areas endow the hierarchical MoS2 and WS2 nanosheets with excellent electrocatalytic performance for hydrogen evolution, including low onset potentials and high current densities.

Free-Standing Monolayer Two-Dimensional Supramolecular Organic Framework with Good Internal Order

Utilizing dynamic self-assembly and self-sorting to obtain large-area, molecularly precise monolayered structures represents a promising approach toward two-dimensional supramolecular organic frameworks (2D SOF) or 2D supramolecular polymers. So far, related approaches suffer from small domain sizes, fragility and weak long-range internal order. Here we report on the self-assembly of a host–guest enhanced donor–acceptor interaction, consisting of a tris(methoxynaphthyl)-substituted truxene spacer, and a naphthalene diimide substituted with N-methyl viologenyl moieties as donor and acceptor monomers, respectively, in combination with cucurbit[8]uril as host monomer toward monolayers of an unprecedented 2D SOF. Featuring orthogonal solubility, the participating molecules self-assemble at a liquid–liquid interface, yielding exceptionally large-area, insoluble films, which were analyzed by transmission electron microscopy, atomic force microscopy and optical microscopy to be monolayers with a thickness of 1.8 nm, homogeneously covering areas up to 0.25 cm2, and featuring the ability to be free-standing over holes of 10 μm2. Characterization with ultraviolet–visible absorption spectroscopy, solid-state nuclear magnetic resonance spectroscopy, infrared spectroscopy, and grazing incidence wide-angle X-ray scattering allowed for confirmation of a successful complexation of all three monomers toward an internal long-range order and gave indications to an expected hexagonal superstructure. Our results extend the existing variety of two-dimensional soft nanomaterials by a versatile supramolecular approach, whereas the possibility of varying the functional monomers is supposed to open adaptability to different applications like membranes, sensors, molecular sieves, and optoelectronics.

Wafer-sized multifunctional polyimine-based two-dimensional conjugated polymers with high mechanical stiffness

One of the key challenges in two-dimensional (2D) materials is to go beyond graphene, a prototype 2D polymer (2DP), and to synthesize its organic analogues with structural control at the atomic- or molecular-level. Here we show the successful preparation of porphyrin-containing monolayer and multilayer 2DPs through Schiff-base polycondensation reaction at an air–water and liquid–liquid interface, respectively. Both the monolayer and multilayer 2DPs have crystalline structures as indicated by selected area electron diffraction. The monolayer 2DP has a thickness of∼0.7 nm with a lateral size of 4-inch wafer, and it has a Youngs modulus of 267±30 GPa. Notably, the monolayer 2DP functions as an active semiconducting layer in a thin film transistor, while the multilayer 2DP from cobalt-porphyrin monomer efficiently catalyses hydrogen generation from water. This work presents an advance in the synthesis of novel 2D materials for electronics and energy-related applications.