Ria Cornelissen

Alternative Routes to Induce Naïve Pluripotency in Human Embryonic Stem Cells

Human embryonic stem cells (hESCs) closely resemble mouse epiblast stem cells exhibiting primed pluripotency unlike mouse ESCs (mESCs), which acquire a naïve pluripotent state. Efforts have been made to trigger naïve pluripotency in hESCs for subsequent unbiased lineage‐specific differentiation, a common conundrum faced by primed pluripotent hESCs due to heterogeneity in gene expression existing within and between hESC lines. This required either ectopic expression of naïve genes such as NANOG and KLF2 or inclusion of multiple pluripotency‐associated factors. We report here a novel combination of small molecules and growth factors in culture medium (2i/LIF/basic fibroblast growth factor + Ascorbic Acid + Forskolin) facilitating rapid induction of transgene‐free naïve pluripotency in hESCs, as well as in mESCs, which has not been shown earlier. The converted naïve hESCs survived long‐term single‐cell passaging, maintained a normal karyotype, upregulated naïve pluripotency genes, and exhibited dependence on signaling pathways similar to naïve mESCs. Moreover, they undergo global DNA demethylation and show a distinctive long noncoding RNA profile. We propose that in our medium, the FGF signaling pathway via PI3K/AKT/mTORC induced the conversion of primed hESCs toward naïve pluripotency. Collectively, we demonstrate an alternate route to capture naïve pluripotency in hESCs that is fast, reproducible, supports naïve mESC derivation, and allows efficient differentiation. Stem Cells 2015;33:2686–2698

Enzymatic mineralization of gellan gum hydrogel for bone tissue-engineering applications and its enhancement by polydopamine

Interest is growing in the use of hydrogels as bone tissue‐engineering (TE) scaffolds due to advantages such as injectability and ease of incorporation of active substances such as enzymes. Hydrogels consisting of gellan gum (GG), an inexpensive calcium‐crosslinkable polysaccharide, have been applied in cartilage TE. To improve GG suitability as a material for bone TE, alkaline phosphatase (ALP), an enzyme involved in mineralization of bone by cleaving phosphate from organic phosphate, was incorporated into GG hydrogels to induce mineralization with calcium phosphate (CaP). Incorporated ALP induced formation of apatite‐like material on the submicron scale within GG gels, as shown by FTIR, SEM, EDS, XRD, ICP‐OES, TGA and von Kossa staining. Increasing ALP concentration increased amounts of CaP as well as stiffness. Mineralized GG was able to withstand sterilization by autoclaving, although stiffness decreased. In addition, mineralizability and stiffness of GG was enhanced by the incorporation of polydopamine (PDA). Furthermore, mineralization of GG led to enhanced attachment and vitality of cells in vitro while cytocompatibility of the mineralized gels was comparable to one of the most commonly used bone substitute materials. The results proved that ALP‐mediated enzymatic mineralization of GG could be enhanced by functionalization with PDA. Copyright

Histologic analysis of pulpal revascularization of autotransplanted immature teeth after removal of the original pulp tissue

The survival rate of replanted and autotransplanted teeth is mainly affected by the reaction of the pulp. Pulpal necrosis can cause periapical inflammation and inflammatory root resorption. The purpose of this study is to learn more about the pulpal changes in autotransplanted immature teeth whose pulp tissue was removed before transplantation. The experimental material consisted of 16 single-rooted teeth with open apices, from a beagle dog (3 months of age). At day 0, 4 teeth were extracted, the pulpal tissues were removed, and the teeth were then transplanted to their contralateral side. The same procedure was carried out on days 9, 16, and 23, each time for 4 single-rooted teeth. Longitudinal paraffin sections were made for histologic investigation. The results showed that, after 7 days, 2 of the 4 teeth had an ingrowth of new tissue over one fourth of their length. After 14 days, all 4 teeth had ingrowth (> or =one fourth of the pulp chamber). At the 21-day observation, more than half of the pulp chambers of all teeth were filled, and, after 30 days, there was total ingrowth in 3 of the 4 teeth. This new tissue consisted of well-organized and well-vascularized connective tissue.

Efficient differentiation of human embryonic stem cells into a homogeneous population of osteoprogenitor-like cells

The use of human embryonic stem cells (hESC) in both research and therapeutic applications requires relatively large homogeneous populations of differentiated cells. The differentiation of three hESC lines into highly homogeneous populations of osteoprogenitor-like (hESC-OPL) cells is reported here. These cells could be expanded in a defined culture system for more than 18 passages, and showed a fibroblast-like morphology and a normal stable karyotype. The cells were strongly positive for the same antigenic markers as mesenchymal stem cells but negative for markers of haematopoetic stem cells. The hESC-OPL cells were able to differentiate into the osteogenic, but not into the chondrogenic or adipogenic, lineage and were positive for markers of early stages of osteogenic differentiation. When cultured in the presence of osteogenic supplements, the cells indicated the capacity to achieve, under inductive conditions, a mature osteoblast phenotype. The differentiation protocol is based on a monolayer approach, and does not require any exogenous factors other than fetal calf serum, or coculture systems of animal or human origin. This method is likely to be amenable to large-scale production of homogeneous osteoprogenitor-like cells and thus overcomes one of the major problems of differentiation of hESC, with important relevance for further cell therapy studies.

The influence of early embryo traits on human embryonic stem cell derivation efficiency.

Despite its prognostic value in in vitro fertilization, early embryo morphology is not reported on in the derivation of human embryonic stem cell (hESC) lines. Standard hESC derivation does rely on blastocyst development and its efficiency is highly correlated to inner cell mass (ICM) quality. Poor-quality embryos (PQEs) donated for hESC derivation may have a range of cleavage-stage abnormalities that are known to compromise further development. This study was implemented to determine whether specific PQEs traits influence the efficiency of good-quality ICMs to derive new hESC lines. We found that although the types of PQEs investigated were all able to make blastocysts with good-quality ICMs, the ICMs were unequal in their ability to derive hESCs. Good-quality ICMs from embryos with multiple poor-quality traits were unable to generate hESC lines, in contrast to good-quality ICMs from embryos with a single poor-quality trait. In addition, our data suggest a direct correlation between the number of ICM cells present in the blastocyst and its capacity to derive new hESC lines. This study is the first to demonstrate that ICM quality alone is an incomplete indicator of hESC derivation and that application of in vitro fertilization-based early embryo scoring can help predict hESC derivation efficiency. Experiments aiming to quantify, improve upon, or compare hESC derivation efficiency should thus take into consideration early embryo morphology scoring for the comparison of groups with equal developmental competence.

Injectable self-gelling composites for bone tissue engineering based on gellan gum hydrogel enriched with different bioglasses

Hydrogels of biocompatible calcium-crosslinkable polysaccharide gellan gum (GG) were enriched with bioglass particles to enhance (i) mineralization with calcium phosphate (CaP); (ii) antibacterial properties and (iii) growth of bone-forming cells for future bone regeneration applications. Three bioglasses were compared, namely one calcium-rich and one calcium-poor preparation both produced by a sol-gel technique (hereafter referred to as A2 and S2, respectively) and one preparation of composition close to that of the commonly used 45S5 type (hereafter referred to as NBG). Incubation in SBF for 7 d, 14 d and 21 d caused apatite formation in bioglass-containing but not in bioglass-free samples, as confirmed by FTIR, XRD, SEM, ICP-OES, and measurements of dry mass, i.e. mass attributable to polymer and mineral and not water. Mechanical testing revealed an increase in compressive modulus in samples containing S2 and NBG but not A2. Antibacterial testing using biofilm-forming meticillin-resistant staphylococcus aureus (MRSA) showed markedly higher antibacterial activity of samples containing A2 and S2 than samples containing NBG and bioglass-free samples. Cell biological characterization using rat mesenchymal stem cells (rMSCs) revealed a stimulatory effect of NBG on rMSC differentiation. The addition of bioglass thus promotes GG mineralizability and, depending on bioglass type, antibacterial properties and rMSC differentiation.

High Throughput Micro-Well Generation of Hepatocyte Micro-Aggregates for Tissue Engineering

The main challenge in hepatic tissue engineering is the fast dedifferentiation of primary hepatocytes in vitro. One successful approach to maintain hepatocyte phenotype on the longer term is the cultivation of cells as aggregates. This paper demonstrates the use of an agarose micro-well chip for the high throughput generation of hepatocyte aggregates, uniform in size. In our study we observed that aggregation of hepatocytes had a beneficial effect on the expression of certain hepatocyte specific markers. Moreover we observed that the beneficial effect was dependent on the aggregate dimensions, indicating that aggregate parameters should be carefully considered. In a second part of the study, the selected aggregates were immobilized by encapsulation in methacrylamide-modified gelatin. Phenotype evaluations revealed that a stable hepatocyte phenotype could be maintained during 21 days when encapsulated in the hydrogel. In conclusion we have demonstrated the beneficial use of micro-well chips for hepatocyte aggregation and the size-dependent effects on hepatocyte phenotype. We also pointed out that methacrylamide-modified gelatin is suitable for the encapsulation of these aggregates.

An optimized growth factor cocktail for ovine mesenchymal stem cells

Growth factors that regulate proliferation, migration, and invasion of ovine mesenchymal stem cells (oMSCs) are not well defined. In this study, we have evaluated five growth factors for their ability to initiate and support in vitro proliferation, migration, and invasion of oMSCs. oMSCs were exposed to different doses and combinations of the growth factors: basic fibroblast growth factor (bFGF), transforming growth factor-β (TGF-β), epidermal growth factor (EGF), insulin growth factor-I (IGF-I), connective tissue growth factor, and platelet-derived growth factor-AB (PDGF-AB). Cellular proliferation, motility, and invasiveness were assayed. The most proliferative stimulating growth factors are PDGF-AB+TGF-β and PDGF-AB+IGF-I. Combinations EGF+bFGF and EGF+bFGF+PDGF-AB demonstrated the greatest ability to stimulate migration. Moreover, the triple cocktail EGF+bFGF+TGF-β has the most significant effect on invasion. Different growth factor cocktails are required to enhance proliferation, migration, and invasion. These results may be useful for the development of a tissue-engineered heart valve by stimulating cellular repopulation.

Design and fabrication of a low cost implantable bladder pressure monitor

In the frame of the Flemish Community funded project Bioflex we developed and fabricated an implant for short term (< 7 days) bladder pressure monitoring, and diagnosis of incontinence. This implant is soft and flexible to prevent damaging the bladder’s inner wall. It contains a standard flexible electronic circuit connected to a battery, which are embedded in surface treated silicone to enhance the biocompatibility and prevent salt deposition. This article describes the fabrication of the pill and the results of preliminary cytotoxicity tests. The electronic design and its tests, implantation and the result of the in-vivo experimentation will be presented in other articles.

Cryogel-PCL combination scaffolds for bone tissue repair.

The present work describes the development and the evaluation of cryogel-poly-ε-caprolactone combinatory scaffolds for bone tissue engineering. Gelatin was selected as cell-interactive biopolymer to enable the adhesion and the proliferation of mouse calvaria pre-osteoblasts while poly-ε-caprolactone was applied for its mechanical strength required for the envisaged application. In order to realize suitable osteoblast carriers, methacrylamide-functionalized gelatin was introduced into 3D printed poly-ε-caprolactone scaffolds created using the Bioplotter technology, followed by performing a cryogenic treatment which was concomitant with the redox-initiated, covalent crosslinking of the gelatin derivative (i.e. cryogelation). In a first part, the efficiency of the cryogelation process was determined using gel fraction experiments and by correlating the results with conventional hydrogel formation at room temperature. Next, the optimal cryogelation parameters were fed into the combinatory approach and the scaffolds developed were characterized for their structural and mechanical properties using scanning electron microscopy, micro-computed tomography and compression tests respectively. In a final part, in vitro biocompatibility assays indicated a good colonization of the pre-osteoblasts and the attachment of viable cells onto the cryogenic network. However, the results also show that the cellular infiltration throughout the entire scaffold is suboptimal, which implies that the scaffold design should be optimized by reducing the cryogel density.