Riccardo Degl'Innocenti

Directional PC12 Cell Migration Along Plastic Nanotracks

The design of materials to promote the development and/or regeneration of neuronal tissue requires the understanding of the mechanisms by which the underlying substrate topography can modulate neuronal cell differentiation and migration. We recently demonstrated that plastic nanogratings (alternating lines of grooves and ridges of submicrometer size) can effectively change the neuronal polarity state, selecting bipolar cells with aligned neurites. Here, we address the effect of nanogratings on the migration properties of differentiating PC12 cells and correlate their behavior with the polarity state induced by the substrate. During neuronal differentiation, cell-substrate interaction is sufficient to induce directional migration along the nanogratings. Control cells contacting flat substrates migrated freely in all directions, while cells differentiating on nanogratings showed slower migration characterized by an angular restriction that confined cell movements. Finally, we show that directional migration on nanogratings is linked to a specific organization of the cell cytoskeleton reflecting the nanograting directionality.

Graphene based plasmonic terahertz amplitude modulator operating above 100 MHz

The terahertz (THz) region of the electromagnetic spectrum holds great potential in many fields of study, from spectroscopy to biomedical imaging, remote gas sensing, and high speed communication. To fully exploit this potential, fast optoelectronic devices such as amplitude and phase modulators must be developed. In this work, we present a room temperature external THz amplitude modulator based on plasmonic bow-tie antenna arrays with graphene. By applying a modulating bias to a back gate electrode, the conductivity of graphene is changed, which modifies the reflection characteristics of the incoming THz radiation. The broadband response of the device was characterized by using THz time-domain spectroscopy, and the modulation characteristics such as the modulation depth and cut-off frequency were investigated with a 2.0 THz single frequency emission quantum cascade laser. An optical modulation cut-off frequency of 105 ± 15 MHz is reported. The results agree well with a lumped element circuit model developed to describe the device.

Magneto-optic transmittance modulation observed in a hybrid graphene–split ring resonator terahertz metasurface

By placing a material in close vicinity of a resonant optical element, its intrinsic optical response can be tuned, possibly to a wide extent. Here, we show that a graphene monolayer, spaced a few tenths of nanometers from a split ring resonator metasurface, exhibits a magneto-optical response which is strongly influenced by the presence of the metasurface itself. This hybrid system holds promises in view of thin optical modulators, polarization rotators, and nonreciprocal devices, in the technologically relevant terahertz spectral range. Moreover, it could be chosen as the playground for investigating the cavity electrodynamics of Dirac fermions in the quantum regime.

Single mode terahertz quantum cascade amplifier

A terahertz (THz) optical amplifier based on a 2.9 THz quantum cascade laser (QCL) structure has been demonstrated. By depositing an antireflective coating on the QCL facet, the laser mirror losses are enhanced to fully suppress the lasing action, creating a THz quantum cascade (QC) amplifier. Terahertz radiation amplification has been obtained, by coupling a separate multi-mode THz QCL of the same active region design to the QC amplifier. A bare cavity gain is achieved and shows excellent agreement with the lasing spectrum from the original QCL without the antireflective coating. Furthermore, a maximum optical gain of ∼30 dB with single-mode radiation output is demonstrated.

Hollow metallic waveguides integrated with terahertz quantum cascade lasers

We present the realization of a compact, monolithically integrated arrangement of terahertz quantum cascade lasers with hollow metallic cylindrical waveguides. By directly mounting a copper pipe to the end facet of a double metal waveguide, it was possible to significantly improve the far field emission from such a sub-wavelength plasmonic mode, while preserving the characteristic performance of the laser. Careful alignment of the quantum cascade laser and the hollow waveguide is required in order to prevent the excitation of higher order/mixed modes as predicted with a high degree of accuracy by a theoretical model. Finally, this approach proved to be a superior method of beam shaping when compared to other in situ arrangements, such as a silicon hyper-hemispherical lens glued to the facet, which are presented.

Hyperuniform disordered terahertz quantum cascade laser.

Laser cavities have been realized in various different photonic systems. One of the forefront research fields regards the investigation of the physics of amplifying random optical media. The random laser is a fascinating concept because, further to the fundamental research investigating light transport into complex media, it allows us to obtain non-conventional spectral distribution and angular beam emission patterns not achievable with conventional approaches. Even more intriguing is the possibility to engineer a priori the optical properties of a disordered distribution in an amplifying medium. We demonstrate here the realization of a terahertz quantum cascade laser in an isotropic hyperuniform disordered distribution exhibiting unique features, such as the presence of a photonic band gap, low threshold current density, unconventional angular emission and optical bistability.

Differential Near-Field Scanning Optical Microscopy with THz quantum cascade laser sources

We have realized a differential Near-field Scanning Optical Microscope (NSOM) working with subwavelength resolution in the THz spectral region. The system employs a quantum cascade laser emitting at lambda approximately 105 microm as source, and the method, differently from conventional NSOM, involves diffracting apertures with size comparable to the wavelength. This concept ensures a higher signal-to-noise level at the expense of an additional computational step. In the implementation here reported lambda/10 resolution has been achieved; present limiting factors are investigated through finite difference time domain simulations.

THz quantum cascade lasers based on a hyperuniform design

A terahertz quantum cascade laser has been realized from an isotropic disordered hyperuniform design. Such a system presents a photonic band-gap although it is characterized by an efficient depletion of the long range order. Hyperuniform patterns allow greater versatility in engineering band gaps in comparison to standard photonic-crystal materials. Bidimensional hyperuniform patterns were simulated for hexagonal tiles composed of high refractive index disks merged in a low dielectric constant polymeric matrix. Based on this design, quantum cascade lasers were fabricated by standard photolithography, metal evaporation, lift-off and dry-etching techniques in a half-stack bound to continuum active region emitting around 2.9 THz.

Fast terahertz optoelectronic amplitude modulator based on plasmonic metamaterial antenna arrays and graphene

The growing interest in terahertz (THz) technologies in recent years has seen a wide range of demonstrated applications, spanning from security screening, non-destructive testing, gas sensing, to biomedical imaging and communication. Communication with THz radiation offers the advantage of much higher bandwidths than currently available, in an unallocated spectrum. For this to be realized, optoelectronic components capable of manipulating THz radiation at high speeds and high signal-to-noise ratios must be developed. In this work we demonstrate a room temperature frequency dependent optoelectronic amplitude modulator working at around 2 THz, which incorporates graphene as the tuning medium. The architecture of the modulator is an array of plasmonic dipole antennas surrounded by graphene. By electrostatically doping the graphene via a back gate electrode, the reflection characteristics of the modulator are modified. The modulator is electrically characterized to determine the graphene conductivity and optically characterization, by THz time-domain spectroscopy and a single-mode 2 THz quantum cascade laser, to determine the optical modulation depth and cut-off frequency. A maximum optical modulation depth of ~ 30% is estimated and is found to be most (least) sensitive when the electrical modulation is centered at the point of maximum (minimum) differential resistivity of the graphene. A 3 dB cut-off frequency > 5 MHz, limited only by the area of graphene on the device, is reported. The results agree well with theoretical calculations and numerical simulations, and demonstrate the first steps towards ultra-fast, graphene based THz optoelectronic devices.

Continuous-wave laser operation of a dipole antenna terahertz microresonator

Resonators and the way they couple to external radiation rely on very different concepts if one considers devices belonging to the photonic and electronic worlds. The terahertz frequency range, however, provides intriguing possibilities for the development of hybrid technologies that merge ideas from both fields in novel functional designs. In this paper, we show that high-quality, subwavelength, whispering-gallery lasers can be combined to form a linear dipole antenna, which creates a very efficient, low-threshold laser emission in a collimated beam pattern. For this purpose, we employ a terahertz quantum-cascade active region patterned into two 19-μm-radius microdisks coupled by a suspended metallic bridge, which simultaneously acts as an inductive antenna and produces the dipole symmetry of the lasing mode. Continuous-wave vertical emission is demonstrated at approximately 3.5 THz in a very regular, low-divergence (±10°) beam, with a high slope efficiency of at least 160 mW A−1 and a mere 6 mA of threshold current, which is ensured by the ultra-small resonator size (VRES/λ3≈10−2). The extremely low power consumption and the superior beam brightness make this concept very promising for the development of miniaturized and portable THz sources to be used in the field for imaging and sensing applications as well as for exploring novel optomechanical intracavity effects.