Riccardo Panicucci

Developability Assessment in Pharmaceutical Industry: An Integrated Group Approach for Selecting Developable Candidates

This article describes the role and responsibilities of the Developability Assessment Group (DAG), a pharmaceutical Research and Development (R&D) subgroup, which supports drug discovery and development scientists with screening, developability assessment, and selection of new molecular entities (NMEs) for clinical studies. A strong collaboration between discovery group and DAG is essential for selecting the right NMEs for late-stage development, and consequently decreasing the NME attrition rate in late-stage development as well as in bringing down the associated cost and timelines. The investigations performed by DAG for evaluating research leads as well as the significance of these investigations in the developability assessment, the value of cutting edge tools and technologies, and the usefulness of the data in the decision making process are discussed in this review. Developability assessment of NMEs often includes physicochemical and biopharmaceutical characterization, development of suitable formulations for pharmacokinetic (PK), efficacy, and toxicity studies, selection of suitable physical form (salt, polymorph, etc.), and formulation development for phase I clinical studies. Overall DAG activities not only contribute to streamlining efficacy-toxicology evaluation, but also in building developability screens, which allow pharmacologically effective, minimally toxic, and developable candidates to reach the clinic and eventually to the market.

Selection of oral bioavailability enhancing formulations during drug discovery

The objective of this paper was to identify oral bioavailability enhancing approaches for a poorly water-soluble research compound during drug discovery stages using minimal amounts of material. LCQ789 is a pBCS (preclinical BCS) Class II compound with extremely low aqueous solubility (<1 µg/mL) and high permeability, therefore, resulting in very low oral bioavailability in preclinical species (rats and dogs). A number of solubility and/or dissolution enhancing approaches including particle size reduction, solid dispersions, lipid-based formulations and co-crystals, were considered in order to improve the compound’s oral bioavailability. High-Throughput Screening (HTS) and in silico modeling (GastroPlus™) were utilized to minimize the compound consumption in early discovery stages. In vivo evaluation of selected physical form and formulation strategies was performed in rats and dogs. Amongst the formulation strategies, optimized solid dispersion and lipid-based formulation provided significant improvement in drug dissolution rate and hence, oral bioavailability. In addition, a significant impact of physical form on oral bioavailability of LCQ789 was observed. In conclusion, a thorough understanding of not only the formulation technique but also the physical form of research compounds is critical to ensure physical stability, successful pharmacokinetic (PK) profiling and early developability risk assessment.

Intranasal brain delivery of cationic nanoemulsion-encapsulated TNFα siRNA in prevention of experimental neuroinflammation.

UNLABELLED Neuroinflammation is a hallmark of acute and chronic neurodegenerative disorders. The main aim of this study was to evaluate the therapeutic efficacy of intranasal cationic nanoemulsion encapsulating an anti-TNFα siRNA, for potential anti-inflammatory therapy. TNFα siRNA nanoemulsions were prepared and characterized for particle size, surface charge, morphology, and stability and encapsulation efficiency. Qualitative and quantitative intracellular uptake studies by confocal imaging and flow cytometry, respectively, showed higher uptake compared to Lipofectamine® transfected siRNA. Nanoemulsion significantly lowered TNFα levels in LPS-stimulated cells. Upon intranasal delivery of cationic nanoemulsions almost 5 fold higher uptake was observed in the rat brain compared to non-encapsulated siRNA. More importantly, intranasal delivery of TNFα siRNA nanoemulsions in vivo markedly reduced the unregulated levels of TNFα in an LPS-induced model of neuroinflammation. These results indicate that intranasal delivery of cationic nanoemulsions encapsulating TNFα siRNA offered an efficient means of gene knockdown and this approach has significant potential in prevention of neuroinflammation. FROM THE CLINICAL EDITOR Neuroinflammation is often seen in patients with neurodegenerative disorders and tumor necrosis factor-alpha (TNFα) plays a significant role in contributing to neuronal dysfunction. As a result, inhibition of TNFα may alleviate disease severity. In this article, the authors investigated using a cationic nanoemulsion system carrying TNFα siRNA intra-nasally to protect against neuroinflammation. This new method may provide a future approach in this clinical setting.

Comparative Biodistribution and Pharmacokinetic Analysis of Cyclosporine-A in the Brain upon Intranasal or Intravenous Administration in an Oil-in-Water Nanoemulsion Formulation

The main objective of this study was to evaluate comparative biodistribution and pharmacokinetics of cyclosporine-A (CsA) following intranasal (IN) administration versus intravenous (IV) administration in Sprague-Dawley rats using an oil-in-water nanoemulsion delivery system. CsA, a hydrophobic peptide that is also a substrate for P-glycoprotein, is a well-known immunosuppressive agent. In the brain, CsA has been shown to be a potent anti-inflammatory and neuroprotective agent. CsA nanoemulsions (CsA-NE) and solution formulations (CsA-S) were prepared using an ultrasonication method and were characterized for drug content, encapsulation efficiency, globule size, and zeta potential. We compared the uptake of CsA-NE and CsA-S in brain regions and peripheral organs following IN and IV administration using LC-MS/MS based bioanalytical method. CsA-NE IN resulted in the highest accumulation compared to that with any other treatment and route of administration; this was consistent for all three regions of brain that were evaluated (olfactory bulbs, mid brain, and hind brain). The brain/blood exposure ratios of 4.49, 0.01, 0.33, and 0.03 for CsA-NE (IN), CsA-NE (IV), CsA-S (IN), and CsA-S (IV), respectively, indicated that CsA-NE is capable of direct nose-to-brain transport, bypassing the blood-brain barrier. Furthermore, CsA-NE administration reduces nontarget organ exposure. These studies show that IN delivery of CsA-NE is an effective way of brain targeting compared to that of other treatment strategies. This approach not only enhances the brain concentration of the peptide but also significantly limits peripheral exposure and the potential for off-target toxicity.

Novel coprocessed excipients composed of lactose, HPMC, and PVPP for tableting and its application.

New coprocessed excipients composed of α-lactose monohydrate (a filler), HPMC E3 (a binder), and PVPP (a superdisintegrant) were developed by spray drying in this study to improve the tableting properties of lactose. Factors affecting the properties of the coprocessed excipients were investigated by a 3 × 3 × 2 factorial design. These factors include lactose grade (90 M, 200 M, and 450 M), percentage of HPMC (3.5%, 7.0%, and 10.5%), and percentage of PVPP (0% and 3.5%). The results show that the compactability of the excipients could be significantly improved by increasing either the percentage of HPMC or the primary particle size of lactose. The addition of 3.5% PVPP had little effect on the compactability, but significantly improved the disintegration ability. The developed coprocessed excipients have much lower yield pressures and much higher working efficiency during tableting compared to the main raw material (α-lactose monohydrate). These improvements are mainly attributed to the addition of HPMC and the proximately 30% amorphous lactose formed during process. Both HPMC and amorphous lactose were homogeneously distributed on the surface of the secondary particles, maximizing their effect. Furthermore, the low hygroscopicity and high glass transition temperature of HPMC led to a high yield. The drug loading capacity of the newly coprocessed excipients is also excellent. In summary, the tri-component coprocessed excipients investigated are promising and worthy of further development.

Preclinical Development for Suspensions

This chapter summarizes the significance of suspension in preclinical development. Majority of the preclinical studies are carried out using suspension. Therefore, it is important to know the physical form change, particle size distribution, ease of manufacturability and physico-chemical stability for the molecules used in preclinical studies. Here, the impact of physicochemical properties and formulation on the oral exposure in vivo and toxicity of drug candidates were reviewed in line with other ADME parameters (absorption, distribution, metabolism and elimination). From drug discovery perspective, the latest development of in vitro and in vivo approaches and the opportunity/limitation to assess the potential risks of drug candidates are summarized. Strategy to apply multiple ADME and formulation tools in lead optimization and candidate selection in drug discovery were also demonstrated. Authors focused more on oral suspension, however, there are a number of other dosage forms where suspension can be applied such as topical, parenteral, and inhalation.

Co-crystal formation based on structural matching.

A co-crystal is defined as a single crystalline structure composed of two or more components with no proton transfer which are solid at room temperature. Our group has come up with the following rationale selection of co-formers for initial co-crystal screening: 1) selection of co-formers with the highest potential for hydrogen bonding with the API and 2) selection of co-formers with diversity of secondary structural characteristics. We demonstrate the feasibility of this technique with a Novartis drug candidate A. In the first tier, 20 co-formers were screened and two hits were identified. By examining the two co-formers, which worked from the first round, a second round of screening was undertaken with more focused chemical matter. Nineteen co-crystal formers closely related to the two hits in the first screen were screened in the second tier. From this screen five hits were identified. All the hits were compared for their physical and chemical stability and dissolution profile. Based on the comparison 4-aminobenzoic co-crystal was chosen for in-vivo comparison with the free form. The co-crystal had 12 times higher exposure than the free form thus overcoming the solubility limited exposure.