Richard Lookman

Combining HPLC-GCXGC, GCXGC/ Tof-MS, and Selected Ecotoxicity Assays for Detailed Monitoring of Petroleum Hydrocarbon Degradation in Soil and Leaching Water

HPLC-GCXGC/FID (high-performance liquid chromatography followed by comprehensive two-dimensional gas chromatography with flame-ionization detection) and GCXGC/ToF-MS (comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry) were used to study the biodegradation of petroleum hydrocarbons in soil microcosms during 20 weeks. Two soils were studied: one spiked with fresh diesel and one field sample containing weathered diesel-like oil. Nutrient amended and unamended samples were included. Total petroleum hydrocarbon (TPH) levels in spiked soil decreased from 15,000 to 7,500 mg/kg d.m. and from 12,0O0 to 4,000 mg/kg d.m. in the field soil. Linear alkanes and aromatic hydrocarbons were better biodegradable (>60% degraded) than iso-alkanes; cycloalkanes were least degradable (<40%). Aromatic hydrocarbons up to three rings showed better degradability than n-alkanes. GCXGC/ToF-MS analysis of leaching water showed that initially various oxygenated hydrocarbons were produced. Compound peaks seemed to move up and rightward in the GCXGC chromatograms, indicating that more polar and heavier compounds were formed as biodegradation proceeded. Nutrient amendment can increase TPH removal rates, but had adverse effects on ecotoxicity and leaching potential in our experiment This was explained by observed shifts in the soil microbial community. Ecotoxicity assays showed that residual TPH still inhibited cress (Lepidium sativum) seed germination, but the leaching water was no longer toxic toward luminescent bacteria (Vibrio fischeri).

Sustainability appraisal tools for soil and groundwater remediation: how is the choice of remediation alternative influenced by different sets of sustainability indicators and tool structures?

The state-of-the-science in sustainability assessment of soil and groundwater remediation is evaluated with the application of four decision support systems (DSSs) to a large-scale brownfield revitalization case study. The DSSs were used to perform sustainability appraisals of four technically feasible remediation alternatives proposed for the site. The first stage of the review compares the scope of each tools sustainability indicators, how these indicators are measured and how the tools differ in terms of standardization and weighting procedures. The second stage of the review compares the outputs from the tools and determines the key factors that result in differing results between tools. The evaluation of indicator sets and tool structures explains why the tools generate differing results. Not all crucial impact areas, as identified by sustainable remediation forums, are thoroughly considered by the tools, particularly with regard to the social and economic aspects of sustainability. Variations in boundary conditions defined between technologies, produce distorted environmental impact results, especially when in-situ and ex-situ technologies are compared. The review draws attention to the need for end users to be aware of which aspects of sustainability are considered, how the aspects are measured and how all aspects are ultimately balanced in the evaluation of potential remediation strategies. Existing tools can be improved by considering different technologies within the same boundary conditions and by expanding indicator sets to include indicators deemed to be relevant by remediation forums.

Detailed analysis of petroleum hydrocarbon attenuation in biopiles by high-performance liquid chromatography followed by comprehensive two-dimensional gas chromatography.

Enhanced bioremediation of petroleum hydrocarbons in two biopiles was quantified by high-performance liquid chromatography (HPLC) followed by comprehensive two-dimensional gas chromatography (GCXGC). The attenuation of 34 defined hydrocarbon classes was calculated by HPLC-GCXGC analysis of representative biopile samples at start-up and after 18 weeks of biopile operation. In general, a-cyclic alkanes were most efficiently removed from the biopiles, followed by monoaromatic hydrocarbons. Cycloalkanes and polycyclic aromatic hydrocarbons (PAHs) were more resistant to degradation. A-cyclic biomarkers farnesane, trimethyl-C13, norpristane, pristane and phytane dropped to only about 10% of their initial concentrations. On the other hand, C29-C31 hopane concentrations remained almost unaltered after 18 weeks of biopile operation, confirming their resistance to biodegradation. They are thus reliable indicators to estimate attenuation potential of petroleum hydrocarbons in biopile processed soils.

Aqueous solubility calculation for petroleum mixtures in soil using comprehensive two-dimensional gas chromatography analysis data

An assessment of aqueous solubility (leaching potential) of soil contaminations with petroleum hydrocarbons (TPH) is important in the context of the evaluation of (migration) risks and soil/groundwater remediation. Field measurements using monitoring wells often overestimate real TPH concentrations in case of presence of pure oil in the screened interval of the well. This paper presents a method to calculate TPH equilibrium concentrations in groundwater using soil analysis by high-performance liquid chromatography followed by comprehensive two-dimensional gas chromatography (HPLC-GCXGC). The oil in the soil sample is divided into 79 defined hydrocarbon fractions on two GCXGC color plots. To each of these fractions a representative water solubility is assigned. Overall equilibrium water solubility of the non-aqueous phase liquid (NAPL) present in the sample and the water phases chemical composition (in terms of the 79 fractions defined) are then calculated using Raoults law. The calculation method was validated using soil spiked with 13 different TPH mixtures and 1 field-contaminated soil. Measured water solubilities using a column recirculation equilibration experiment agreed well to calculated equilibrium concentrations and water phase TPH composition.

BIOLOGICAL ASSESSMENT AND REMEDIATION OF CONTAMINATED SEDIMENTS

Various approaches to clean contaminated aquatic environments have been proposed. In recent years, natural attenuation has received increasing attention and it is generally accepted that microorganisms are the principal mediators of the natural attenuation of many pollutants. However, the complexity of environmental systems such as sediments requires a multifaceted approach to understand microbial processes and their potential. This is even more so under in situ conditions, where the activity of pollutant degrading microorganisms is generally slow, partial and constrained spatially and/or temporally. Recent developments in molecular biology and genomics are offering tools to explore microbial processes at a level that encompasses the genetic characteristics of the local microbial players, culturable or not, as well as their organization into complex communities and their interactions both with each other and with the target chemicals. It is now possible to study microbes directly in their environments at the population level as well as at the single cell level and to link biology to geochemistry. Integrative knowledge from culture-independent studies based on functional characters and assessment of the diversity and quantity of catabolic genes in response to pollution, will allow a deeper understanding of and a rational intervention in environmental processes. Moreover, the use of genomic libraries to retrieve genes from natural bacterial communities without cultivation will allow a breakthrough in accessing new microbial capabilities. In this chapter, the main features, advantages and limitations of these innovative approaches to the biomonitoring and analysis of intrinsic bioremediation potential of polluted environments and sediments are critically reviewed. Then, the potential of the same strategies in the integrated chemical, physical and biological monitoring and characterization of polluted sediments subjected to natural decontamination is shown through the description of the main results of case studies performed on a) polychlorinated biphenyl (PCB)-contaminated marine sediments of the Porto Marghera area of Venice Lagoon (Italy) in which the occurrence of PCB-reductive dechlorination processes has been demonstrated for the first time in the literature, b) sediments contaminated by chlorinated aliphatic hydrocarbons (CAHs) collected from different positions of the eutrophic river Zenne (Vilvoorde, Belgium), where they have been found to act as a natural biobarrier for the CAHs occurring in the groundwater that is passing through the sediment zone, hereby reducing the risk of surface water contamination, and c) other environmental contaminated systems subjected to ex-situ and in situ active bioremediation, where these processes are described on the basis of the experience accumulated in pilot and real-life systems.

Examples of Risk Management in Flanders for Large Scale Groundwater Contamination

With respect to soil and groundwater remediation in Flanders, regulators have recently adopted a new, risk-based, policy. This policy is illustrated by two examples of risk management applied for large scale ground-water contamination. The first case involves a benzene and MTBE groundwater contamination threatening a shallow drinking water production site. Source zone treatment combined with pump & treat plume interception may be the only risk-based remediation strategy applicable in such cases. The second example is a risk management plan designed for the redevelopment of a brownfield located near Brussels, Belgium. In this area, an extensive ground-water contamination of monoaromatic and chlorinated aliphatic hydrocarbons is present in the Quaternary aquifer drained by the river Zenne. The risk management plan involves the combination of intensive treatment of source zones and plume treatment.