Richard Sesek

The WISTAH hand study: A prospective cohort study of distal upper extremity musculoskeletal disorders

BackgroundFew prospective cohort studies of distal upper extremity musculoskeletal disorders have been performed. Past studies have provided somewhat conflicting evidence for occupational risk factors and have largely reported data without adjustments for many personal and psychosocial factors.Methods/designA multi-center prospective cohort study was incepted to quantify risk factors for distal upper extremity musculoskeletal disorders and potentially develop improved methods for analyzing jobs. Disorders to analyze included carpal tunnel syndrome, lateral epicondylalgia, medial epicondylalgia, trigger digit, deQuervain’s stenosing tenosynovitis and other tendinoses. Workers have thus far been enrolled from 17 different employment settings in 3 diverse US states and performed widely varying work. At baseline, workers undergo laptop administered questionnaires, structured interviews, two standardized physical examinations and nerve conduction studies to ascertain demographic, medical history, psychosocial factors and current musculoskeletal disorders. All workers’ jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of musculoskeletal disorders. Repeat nerve conduction studies are performed for those with symptoms of tingling and numbness in the prior six months. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. Case definitions have been established. Point prevalence of carpal tunnel syndrome is a combination of paraesthesias in at least two median nerve-served digits plus an abnormal nerve conduction study at baseline. The lifetime cumulative incidence of carpal tunnel syndrome will also include those with a past history of carpal tunnel syndrome. Incident cases will exclude those with either a past history or prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression.DiscussionA prospective cohort study of distal upper extremity musculoskeletal disorders is underway and has successfully enrolled over 1,000 workers to date.

Impact of the OSHA trench and excavation standard on fatal injury in the construction industry.

Learning ObjectivesRecall the past effectiveness—or lack thereof—of OSHA in lowering injury rates in the workplace, and the influence of the MSHA (Mine Safety and Health Administration) in the coal mining industry.Describe the course of fatal injury rates before and after revision of an ambiguous consensus standard governing trench and excavation jobs, along with introduction of a targeted inspection program in 1990.Explain whether and how changes in fatality rates depend on the size of construction firms and whether or not workers are unionized. In 1989 the US Occupational Safety & Health Administration revised the excavation and trenching standard. We examined fatal injuries from trench cave-in in the construction industry for five year periods before and after the revision in the 47 US states for which data were available for both periods. There was a 2-fold decline in the rate of fatal injury after revision of the standard, which substantially exceeded the decline in other causes of fatal injury in the construction industry during the same period. The decline was somewhat greater in large business firms but was evident in construction firms of all size classes. The fatality rate from trench cave-in in union construction workers was approximately half that of nonunion workers, but we were unable to determine whether this was best explained by union status, employment of union workers at larger construction firms, or both. This study provides evidence for the effectiveness of OSHA regulation in preventing fatal work injury.

Machining Performance and Health Effects of Cutting Fluid Application in Drilling of A390.0 Cast Aluminum Alloy

Environmental issues in machining have led to a push to curtail the use of cutting fluids. However, cutting fluid effects on part quality, process planning, and operator exposure to aerosols need to be first studied. The effects of cutting fluid application on hole accuracy and mist generation have been studied for blind-hole drilling of A390.0 aluminum alloy. Different cutting fluid types and application modes were tested under varying conditions of cutting speed, feed, and hole depth. The cooling and chip-transporting ability of cutting fluids was found to have the maximum effect on dimensional accuracy. Dry cutting yielded holes with the least accuracy, while mist lubrication was found to give superior dimensional accuracy to dry cutting but had the worst aerosol concentration. Flooding with synthetic cutting fluid gave the best overall results.

Study protocol title: a prospective cohort study of low back pain

BackgroundFew prospective cohort studies of workplace low back pain (LBP) with quantified job physical exposure have been performed. There are few prospective epidemiological studies for LBP occupational risk factors and reported data generally have few adjustments for many personal and psychosocial factors.Methods/designA multi-center prospective cohort study has been incepted to quantify risk factors for LBP and potentially develop improved methods for designing and analyzing jobs. Due to the subjectivity of LBP, six measures of LBP are captured: 1) any LBP, 2) LBPu2009≥u20095/10 pain rating, 3) LBP with medication use, 4) LBP with healthcare provider visits, 5) LBP necessitating modified work duties and 6) LBP with lost work time. Workers have thus far been enrolled from 30 different employment settings in 4 diverse US states and performed widely varying work. At baseline, workers undergo laptop-administered questionnaires, structured interviews, and two standardized physical examinations to ascertain demographics, medical history, psychosocial factors, hobbies and physical activities, and current musculoskeletal disorders. All workers’ jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of low back pain. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. The lifetime cumulative incidence of low back pain will also include those with a past history of low back pain. Incident cases will exclude prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression.DiscussionData analysis of a prospective cohort study of low back pain is underway and has successfully enrolled over 800 workers to date.

Job Level Risk Assessment Using Task Level Strain Index Scores: A Pilot Study

This paper explores 2 methods of modifying the Strain Index (SI) to assess the ergonomic risk of multi-task jobs. Twenty-eight automotive jobs (15 cases and 13 controls) were studied. The first method is based on the maximum task SI score, and the second method is modeled on the NIOSH Composite Lifting Index (CLI) algorithm, named cumulative assessment of risk to the distal upper extremity (CARD). Significant odds ratios of 11 (CI 1.7–69) and 24 (CI 2.4–240) were obtained using the modified maximum task and CARD, respectively. This indicates that modification of the SI may be useful in determining the risk of distal upper extremity injury associated with a multi-task job.

Job Level Risk Assessment Using Task Level ACGIH Hand Activity Level TLV Scores: A Pilot Study

Existing upper extremity musculoskeletal disorder analytical tools are primarily intended for single or mono-task jobs. However, many jobs contain more than 1 task and some include job rotation. This case/control study investigates methods of modifying an existing tool, the American Conference of Governmental Industrial Hygienists (ACGIH) Hand Activity Level (HAL) Threshold Limit Value (TLV), to assess the upper extremity risk of multi-task jobs. Various methods of combining the task differences and ratios into a job level assessment were explored. Two methods returned significant odds ratios, (p < .05) of 18.0 (95% CI 1.8–172) and 12.0 (95% CI 1.2–120). These results indicate that a modified ACGIH HAL TLV may provide insight into the work-related risk of multi-task jobs. Further research is needed to optimize this process.

Fatal injuries in the United States involving respirators, 1984-1995.

There is little published information concerning the epidemiology of fatal injuries involving respiratory protection. We compiled a case series from U.S. Occupational Safety and Health Administration investigation reports from 1984 through 1995. For the 12-year period there were 41 incidents resulting in 45 deaths due to asphyxiation or chemical poisoning while wearing a respirator. There were 23 deaths related to airline respirators, 17 deaths involving use of negative pressure (air purifying) respirators, and 5 deaths involving self-contained breathing apparatus. Among the 23 deaths involving airline respirators, 15 were associated with compatible connection couplings for breathable air and inert gases. Three workers with beards died who wore tight-fitting respirators in an atmosphere that was immediately dangerous to life and health. Most of the fatalities involved regulatory and procedural violations, and would have been prevented by proper training and compliance with existing regulations. The information concerning the victims was limited but it did not appear that medical screening would have prevented any of the deaths.

Typical whole body vibration exposure magnitudes encountered in the open pit mining industry

According to recent research, a causal link has been established between occupational exposure to whole body vibration and an increased occurrence of low back pain. To aid in the further development of an in-house health and safety program for a large open pit mining facility interested in reducing back pain among its operators, whole body vibration magnitudes were characterized for a range of jobs. Specifically, thirty-five individual jobs from five different areas across the facility were evaluated for tri-axial acceleration levels during normal operating conditions. Tri-axial acceleration magnitudes were categorized into thirteen job groups. Job groups were ranked according to exposure and compared to the ISO 2631-1 standard for health risk assessment. Three of the thirteen job groups produced tri-axial acceleration magnitudes below the ISO 2631-1 low/moderate health caution limit for a twelve hour exposure. Six of the thirteen job groups produced exposures within the moderate health risk range. Four job groups were found to subject operators to WBV acceleration magnitudes above the moderate/high health caution limit.

Evaluation and Quantification of Manual Materials Handling Risk Factors

This study investigated the ability of the Revised NIOSH Lifting Equation (RNLE) to measure the risk of low back injury as verified by employee health outcomes. In addition, several basic risk factors and combinations of risk factors presumed related to low back disorders were explored. The RNLE was modified to allow analysis of one-handed and two-handed, asymmetric lifts. Predictive performance was not changed. Simplifying the RNLE by removing several variables did not significantly reduce the RNLE’s predictive performance. These modifications to the RNLE show promise for increasing both the usability and utility of the RNLE.

Low Back Pain Among Residential Carpenters: Ergonomic Evaluation Using OWAS and 2D Compression Estimation

Occupational low back pain (LBP) remains a leading safety and health challenge. This cross-sectional investigation measured the prevalence of LBP in residential carpenters and investigated ergonomic risk factors. Ninety-four carpenters were investigated for LBP presence and associated risk factors. Ten representative job-tasks were evaluated using the Ovako Working Posture Analysis System (OWAS) and ErgoMaster™ 2D software to measure elements of posture, stress, and risk. Job-tasks were found to differ significantly for total lumbar compression and shear at peak loading (p < .001), ranging from 2 956 to 8 606 N and 802 to 1 974 N respectively. OWAS indicated that slight risk for injury was found in 10 job-tasks while distinct risk was found in 7 of the 10 job-tasks. Seven of the 10 job-tasks exceeded the National Institute for Occupational Safety and Health (NIOSH) action limit of 3 400 N for low back loading. The point prevalence for LBP was 14% while the annual prevalence was 38%.