Richard Weinkamer

Architecture of the osteocyte network correlates with bone material quality

In biological tissues such as bone, cell function and activity crucially depend on the physical properties of the extracellular matrix which the cells synthesize and condition. During bone formation and remodeling, osteoblasts get embedded into the matrix they deposit and differentiate to osteocytes. These cells form a dense network throughout the entire bone material. Osteocytes are known to orchestrate bone remodeling. However, the precise role of osteocytes during mineral homeostasis and their potential influence on bone material quality remains unclear. To understand the mutual influence of osteocytes and extracellular matrix, it is crucial to reveal their network organization in relation to the properties of their surrounding material. Here we visualize and topologically quantify the osteocyte network in mineralized bone sections with confocal laser scanning microscopy. At the same region of the sample, synchrotron small‐angle X‐ray scattering is used to determine nanoscopic bone mineral particle size and arrangement relative to the cell network. Major findings are that most of the mineral particles reside within less than a micrometer from the nearest cell network channel and that mineral particle characteristics depend on the distance from the cell network. The architecture of the network reveals optimization with respect to transport costs between cells and to blood vessels. In conclusion, these findings quantitatively show that the osteocyte network provides access to a huge mineral reservoir in bone due to its dense organization. The observed correlation between the architecture of osteocyte networks and bone material properties supports the hypothesis that osteocytes interact with their mineralized vicinity and thus, participate in bone mineral homeostasis.

Artful interfaces within biological materials

Biological materials have a wide range of mechanical properties matching their biological function. This is achieved via complex structural hierarchies, spanning many length scales, arising from the assembly of different sized building blocks during growth. The interfaces between these building blocks can increase resistance to fracture, join materials of different character, make them deform more easily and provide motility. While they represent only a tiny fraction of the overall volume, interfaces are essential for the integrity and function of the overall tissue. Understanding their construction principles, often based on specialized molecular assemblies, may change our current thinking about composite materials.

Effect of temporal changes in bone turnover on the bone mineralization density distribution: a computer simulation study.

The heterogeneous distribution of mineral content in trabecular bone reflects the continuous renewal of bone material in bone remodeling and the subsequent increase in mineral content in the newly formed bone packets. The bone mineralization density distribution (BMDD) is typically used to describe this nonuniform mineral content of the bone matrix. Our mathematical model describes changes of the BMDD of trabecular bone as a function of bone resorption and deposition rates and the mineralization kinetics in a newly formed bone packet. Input parameters used in the simulations were taken from experimental studies. The simulations of the time evolution of the BMDD after increase in bone turnover (perimenopausal period) resulted in a shift of the BMDD toward lower values of the mineral content. Transiently, there was a broadening of the BMDD configuration partly showing two peaks, which points to a strongly heterogeneous distribution of the mineral. Conversely, when the remodeling rate was reduced (antiresorptive therapy), the BMDD shifted toward higher values of the mineral content. There was a transient narrowing of the distribution before broadening again to reach the new steady state. Results from this latter simulation are in good agreement with measurements of the BMDD of patients after 3 and 5 yr of treatment with risedronate. Based on available experimental data on bone remodeling, this model gives reliable predictions of changes in BMDD, an important factor of bone material quality. With the availability of medications with a known effect on bone turnover, this knowledge opens the possibility for therapeutic manipulation of the BMDD.

Mineralizing surface is the main target of mechanical stimulation independent of age: 3D dynamic in vivo morphometry

Mechanical loading can increase cortical bone mass by shifting the balance between bone formation and resorption towards increased formation. With advancing age resorption outpaces formation resulting in a net loss in cortical bone mass. How cortical bone (re)modeling - especially resorption - responds to mechanical loading with aging remains unclear. In this study, we investigated age-related changes in the modulation of cortical bone formation and resorption sites by mechanical loading. Using in vivo microCT we determined the kinetics of three dimensional formation and resorption parameters. To analyze age-associated adaptation, the left tibiae of young, adult and elderly female C57BL/6 mice were cyclically loaded for 2weeks. Our data showed that in the nonloaded limbs, cortical bone loss with age is the result of an imbalance of resorption to formation thickness, while the surface of resorption is comparable to formation. Loading has a much stronger effect on formation than on resorption; more specifically this effect is due to an increase in formation surface with mechanical stimulation. This is the only effect of loading which is conserved into old age. The resorption thickness is independent of loading in all age groups. Using this novel image analysis technique, we were able for the first time to quantify age-related changes in cortical (re)modeling and the adaptive capacity to mechanics. Most likely a therapy against age-related bone loss combining physical exercise and pharmaceuticals is most efficient if they each act on different parameters of the (re)modeling process. Despite some differences in skeletal aging between mice and humans, our results would suggest that physical exercise in old individuals can positively influence only the formation side of (re) modeling.

Mechanical Properties of Freestanding Polyelectrolyte Capsules: a Quantitative Approach Based on Shell Theory

In this paper we report on AFM force spectroscopy measurements on hollow polymeric spheres of colloidal dimensions made from polyelectrolyte multilayers of polyallylamine and polystyrenesulfonate in water. We find that the shells show a linear force-deformation characteristic for deformations of the order of the shell wall thickness. This experimental outcome is discussed in terms of analytical results of continuum mechanics, in particular the scaling behaviour of the shell spring constant with wall thickness, shell radius and speed of the deformation is analysed. The experimental results agree well with the predictions of Reissner for thin shells and allow us to rescale our stiffness data such that a master curve of shell stiffness is obtained. The result of Reissner is strictly valid only for point like loading situations, while in our experiments a more extended plate like load is applied. Experimentally we find indeed little influence of the probe geometry on the shell spring constant. This result agrees well with finite element (FE) calculations that show that the Reissner result is a good approximation also for non point like loading situations, as long as small deformations are considered.

New Suggestions for the Mechanical Control of Bone Remodeling

Bone is constantly renewed over our lifetime through the process of bone (re)modeling. This process is important for bone to allow it to adapt to its mechanical environment and to repair damage from everyday life. Adaptation is thought to occur through the mechanosensitive response controlling the bone-forming and -resorbing cells. This report shows a way to extract quantitative information about the way remodeling is controlled using computer simulations. Bone resorption and deposition are described as two separate stochastic processes, during which a discrete bone packet is removed or deposited from the bone surface. The responses of the bone-forming and -resorbing cells to local mechanical stimuli are described by phenomenological remodeling rules. Our strategy was to test different remodeling rules and to evaluate the time evolution of the trabecular architecture in comparison to what is known from μ-CT measurements of real bone. In particular, we tested the reaction of virtual bone to standard therapeutic strategies for the prevention of bone deterioration, i.e., physical activity and medications to reduce bone resorption. Insensitivity of the bone volume fraction to reductions in bone resorption was observed in the simulations only for a remodeling rule including an activation barrier for the mechanical stimulus above which bone deposition is switched on. This is in disagreement with the commonly used rules having a so-called lazy zone.

Aging Leads to a Dysregulation in Mechanically Driven Bone Formation and Resorption

Physical activity is essential to maintain skeletal mass and structure, but its effect seems to diminish with age. To test the hypothesis that bone becomes less sensitive to mechanical strain with age, we used a combined in vivo/in silico approach. We investigated how maturation and aging influence the mechanical regulation of bone formation and resorption to 2 weeks of noninvasive in vivo controlled loading in mice. Using 3D in vivo morphometrical assessment of longitudinal microcomputed tomography images, we quantified sites in the mouse tibia where bone was deposited or resorbed in response to controlled in vivo loading. We compared the (re)modeling events (formation/resorption/quiescent) to the mechanical strains induced at these sites (predicted using finite element analysis). Mice of all age groups (young, adult, and elderly) responded to loading with increased formation and decreased resorption, preferentially at high strains. Low strains were associated with no anabolic response in adult and elderly mice, whereas young animals showed a strong response. Adult animals showed a clear separation between strain ranges where formation and resorption occurred but without an intermediate quiescent “lazy zone”. This strain threshold disappeared in elderly mice, as mechanically induced (re)modeling became dysregulated, apparent in an inability to inhibit resorption or initiate formation. Contrary to what is generally believed until now, aging does not shift the mechanical threshold required to initiate formation or resorption, but rather blurs its specificity. These data suggest that pharmaceutical strategies augmenting physical exercise should consider this dysfunction in the mechanical regulation of bone (re)modeling to more effectively combat age‐related bone loss.

The influence of age on adaptive bone formation and bone resorption

Bone is a tissue with enormous adaptive capacity, balancing resorption and formation processes. It is known that mechanical loading shifts this balance towards an increased formation, leading to enhanced bone mass and mechanical performance. What is not known is how this adaptive response to mechanical loading changes with age. Using dynamic micro-tomography, we show that structural adaptive changes of trabecular bone within the tibia of living mice subjected to two weeks of in vivo cyclic loading are altered by aging. Comparisons of 10, 26 and 78 weeks old animals reveal that the adaptive capacity diminishes. Strikingly, adaptation was asymmetric in that loading increases formation more than it reduces resorption. This asymmetry further shifts the (re)modeling balance towards a net bone loss with age. Loading results in a major increase in the surface area of mineralizing bone. Interestingly, the resorption thickness is independent of loading in trabecular bone in all age groups. This data suggests that during youth, mechanical stimulation induces the recruitment of bone modeling cells whereas in old age, only bone forming cells are affected. These findings provide mechanistic insights into the processes that guide skeletal aging in mice as well as in other mammals.

Skeletal maturity leads to a reduction in the strain magnitudes induced within the bone: A murine tibia study

Bone adapts to changes in the local mechanical environment (e.g. strains) through formation and resorption processes. However, the bone adaptation response is significantly reduced with increasing age. The mechanical strains induced within the bone by external loading are determined by bone morphology and tissue material properties. Although it is known that changes in bone mass, architecture and bone tissue quality occur with age, to what extent they contribute to the altered bone adaptation response remains to be determined. This study investigated alterations in strains induced in the tibia of different aged female C57Bl/6J mice (young, 10-week-old; adult, 26-week-old; and elderly, 78-week-old) subjected to in vivo compressive loading. Using a combined in vivo/in silico approach, the strains in the bones were assessed by both strain gauging and finite element modeling experiments. In cortical bone, strain magnitudes induced at the mid-diaphysis decreased by 20% from young to adult mice and by 15% from adult to elderly mice. In the cancellous bone (at the proximal metaphysis), induced strains were 70% higher in young compared with adult and elderly mice. Taking into account previous studies showing a reduced bone adaptation response to mechanical loading in adulthood, these results suggest that the diminished adaptive response is in part due to a reduction in the strains induced within the bone.

Monitoring in vivo (re)modeling: A computational approach using 4D microCT data to quantify bone surface movements

Bone undergoes continual damage repair and structural adaptation to changing external loads with the aim of maintaining skeletal integrity throughout life. The ability to monitor bone (re)modeling would allow for a better understanding in how various pathologies and interventions affect bone turnover and subsequent bone strength. To date, however, current methods to monitor bone (re)modeling over time and in space are limited. We propose a novel method to visualize and quantify bone turnover, based on in vivo microCT imaging and a 4D computational approach. By in vivo tracking of spatially correlated formation and resorption sites over time it classifies bone restructuring into (re)modeling sequences, the spatially and temporally linked sequences of formation, resorption and quiescent periods on the bone surface. The microCT based method was validated using experimental data from an in vivo mouse tibial loading model and ex vivo data of the mouse tibia. In this application, the method allows the visualization of time-resolved cortical (re)modeling and the quantification of short-term and long-term modeling on the endocortical and periosteal surface at the mid-diaphysis of loaded and control mice tibiae. Both short-term and long-term modeling processes, independent formation and resorption events, could be monitored and modeling (spatially not correlated formation and resorption) and remodeling (resorption followed by new formation at the same site) could be distinguished on the bone surface. This novel method that combines in vivo microCT with a computational approach is a powerful tool to monitor bone turnover in animal models now and is waiting to be applied to human patients in the near future.