Richen Lin

Characterisation of water hyacinth with microwave-heated alkali pretreatment for enhanced enzymatic digestibility and hydrogen/methane fermentation.

Microwave-heated alkali pretreatment (MAP) was investigated to improve enzymatic digestibility and H2/CH4 production from water hyacinth. SEM revealed that MAP deconstructed the lignocellulose matrix and swelled the surfaces of water hyacinth. XRD indicated that MAP decreased the crystallinity index from 16.0 to 13.0 because of cellulose amorphisation. FTIR indicated that MAP effectively destroyed the lignin structure and disrupted the crystalline cellulose to reduce crystallinity. The reducing sugar yield of 0.296 g/gTVS was achieved at optimal hydrolysis conditions (microwave temperature = 190°C, time = 10 min, and cellulase dosage = 5 wt%). The sequentially fermentative hydrogen and methane yields from water hyacinth with MAP and enzymatic hydrolysis were increased to 63.9 and 172.5 mL/gTVS, respectively. The energy conversion efficiency (40.0%) in the two-stage hydrogen and methane cogeneration was lower than that (49.5%) in the one-stage methane production (237.4 mL/gTVS) from water hyacinth with MAP and enzymatic hydrolysis.

Comparison in dark hydrogen fermentation followed by photo hydrogen fermentation and methanogenesis between protein and carbohydrate compositions in Nannochloropsis oceanica biomass

The thermodynamic comparison in dark fermentation between amino acids and reducing sugars released from Nannochloropsis oceanica biomass are investigated for the first time. The total utilisation efficiencies of amino acids and reducing sugars are both about 95% in dark fermentation. But the consumption time of most amino acids is about 2 times as long as that of most reducing sugars in dark fermentation. A three-stage method comprising dark fermentation, photofermentation and methanogenesis is proposed to improve hydrogen and energy yields from N. oceanica biomass. Overall, the maximum hydrogen yield of 183.9 ml/g-total volatile solids (TVS) and the methane yield of 161.3 ml/g-TVS are achieved from N. oceanica biomass through the three-stage method. The total energy yield of hydrogen and methane from microalgae biomass through the three-stage method is 1.7 and 1.3 times higher than those through the two-stage (dark fermentation and methanogenesis) and single-stage (methanogenesis) methods, respectively.

Improvement of the energy conversion efficiency of Chlorella pyrenoidosa biomass by a three-stage process comprising dark fermentation, photofermentation, and methanogenesis.

The effects of pre-treatment methods on saccharification and hydrogen fermentation of Chlorella pyrenoidosa biomass were investigated. When raw biomass and biomass pre-treated by steam heating, by microwave heating, and by ultrasonication were used as feedstock, the hydrogen yields were only 8.8-12.7 ml/g total volatile solids (TVS) during dark fermentation. When biomass was pre-treated by steam heating with diluted acid and by microwave heating with diluted acid, the dark hydrogen yields significantly increased to 75.6 ml/g TVS and 83.3 ml/g TVS, respectively. Steam heating with diluted acid is the preferred pre-treatment method of C. pyrenoidosa biomass to improve hydrogen yield during dark fermentation and photofermentation, which is followed by methanogenesis to increase energy conversion efficiency (ECE). A total hydrogen yield of 198.3 ml/g TVS and a methane yield of 186.2 ml/g TVS corresponding to an overall ECE of 34.0% were obtained through the three-stage process (dark fermentation, photofermentation, and methanogenesis).

Inhibitory effects of furan derivatives and phenolic compounds on dark hydrogen fermentation

The inhibitory effects of furan derivatives [i.e. furfural and 5-hydroxymethylfurfural (5-HMF)] and phenolic compounds (i.e. vanillin and syringaldehyde) on dark hydrogen fermentation from glucose were comparatively evaluated. Phenolic compounds exhibited stronger inhibition on hydrogen production and glucose consumption than furan derivatives under the same 15mM concentration. Furan derivatives were completely degraded after 72h fermentation, while over 55% of phenolic compounds remained unconverted after 108h fermentation. The inhibition coefficients of vanillin (14.05) and syringaldehyde (11.21) were higher than those of 5-HMF (4.35) and furfural (0.64). Vanillin exhibited the maximum decrease of hydrogen yield (17%). The consumed reducing power by inhibitors reduction from R-CHO to RCH2OH was a possible reason contributed to the decreased hydrogen yield. Vanillin exhibited the maximum delay of peak times of hydrogen production rate and glucose consumption. Soluble metabolites and carbon conversion efficiency decreased with inhibitors addition, which were consistent with hydrogen production.

Sequential generation of hydrogen and methane from glutamic acid through combined photo-fermentation and methanogenesis.

Glutamic acid can hardly produce hydrogen via dark- or photo-fermentation without pretreatment. In this study, a novel process of acidogenic pretreatment with bacteria and zeolite treatment for NH4(+) removal was proposed to use glutamic acid as feedstock in photo-fermentation for efficient hydrogen production. Glutamic acid pretreated with acidogenic bacteria produces soluble metabolite products. After zeolite treatment, the acidulated solution, which mainly contains acetate, butyrate, and NH4(+), shows a decrease in NH4(+) concentration from 36.7mM to 3.2mM (NH4(+) removal efficiency of 91.1%). After NH4(+) removal, the treated solution is incubated with photosynthetic bacteria, exhibiting a maximum hydrogen yield of 292.9mL/g(-glutamic acid) during photo-fermentation. The residual solution from photo-fermentation is reused by methanogenic bacteria to produce a maximum methane yield of 102.7mL/g. The heating value conversion efficiency from glutamic acid to gas fuel significantly increases from 18.9% during photo-fermentation to 40.9% in the combined photo-fermentation and methanogenesis process.

Boosting biomethane yield and production rate with graphene: The potential of direct interspecies electron transfer in anaerobic digestion

Interspecies electron transfer between bacteria and archaea plays a vital role in enhancing energy efficiency of anaerobic digestion (AD). Conductive carbon materials (i.e. graphene nanomaterial and activated charcoal) were assessed to enhance AD of ethanol (a key intermediate product after acidogenesis of algae). The addition of graphene (1.0g/L) resulted in the highest biomethane yield (695.0±9.1mL/g) and production rate (95.7±7.6mL/g/d), corresponding to an enhancement of 25.0% in biomethane yield and 19.5% in production rate. The ethanol degradation constant was accordingly improved by 29.1% in the presence of graphene. Microbial analyses revealed that electrogenic bacteria of Geobacter and Pseudomonas along with archaea Methanobacterium and Methanospirillum might participate in direct interspecies electron transfer (DIET). Theoretical calculations provided evidence that graphene-based DIET can sustained a much higher electron transfer flux than conventional hydrogen transfer.

Hydrogen production using amino acids obtained by protein degradation in waste biomass by combined dark- and photo-fermentation.

The biological hydrogen production from amino acids obtained by protein degradation was comprehensively investigated to increase heating value conversion efficiency. The five amino acids (i.e., alanine, serine, aspartic acid, arginine, and leucine) produced limited hydrogen (0.2-16.2 mL/g) but abundant soluble metabolic products (40.1-84.0 mM) during dark-fermentation. The carbon conversion efficiencies of alanine (85.3%) and serine (94.1%) during dark-fermentation were significantly higher than those of other amino acids. Residual dark-fermentation solutions treated with zeolite for NH4(+) removal were inoculated with photosynthetic bacteria to further produce hydrogen during photo-fermentation. The hydrogen yields of alanine and serine through combined dark- and photo-fermentation were 418.6 and 270.2 mL/g, respectively. The heating value conversion efficiency of alanine to hydrogen was 25.1%, which was higher than that of serine (21.2%).

Enhanced dark hydrogen fermentation by addition of ferric oxide nanoparticles using Enterobacter aerogenes

Ferric oxide nanoparticles (FONPs) were used to facilitate dark hydrogen fermentation using Enterobacter aerogenes. The hydrogen yield of glucose increased from 164.5±2.29 to 192.4±1.14mL/g when FONPs concentration increased from 0 to 200mg/L. SEM images of E. aerogenes demonstrated the existence of bacterial nanowire among cells, suggesting FONPs served as electron conduits to enhance electron transfer. TEM showed cellular internalization of FONPs, indicating hydrogenase synthesis and activity was potentially promoted due to the released iron element. When further increasing FONPs concentration to 400mg/L, the hydrogen yield of glucose decreased to 147.2±2.54mL/g. Soluble metabolic products revealed FONPs enhanced acetate pathway of hydrogen production, but weakened ethanol pathway. This shift of metabolic pathways allowed more nicotinamide adenine dinucleotide for reducing proton to hydrogen.

Fermentative hydrogen and methane cogeneration from cassava residues: effect of pretreatment on structural characterization and fermentation performance.

The physicochemical properties of cassava residues subjected to microwave (or steam)-heated acid pretreatment (MHAP or SHAP) were comparatively investigated to improve fermentative hydrogen and methane cogeneration. The hydrogen yield from cassava residues with MHAP and enzymolysis was higher (106.2 mL/g TVS) than that with SHAP and enzymolysis (102.1 mL/g TVS), whereas the subsequent methane yields showed opposite results (75.4 and 93.2 mL/g TVS). Total energy conversion efficiency increased to 24.7%. Scanning electron microscopy images revealed MHAP generated numerous regular micropores (∼6 μm) and SHAP generated irregular fragments (∼23 μm) in the destroyed lignocellulose matrix. Transmission electron microscopy images showed SHAP generated wider cracks (∼0.2 μm) in delaminated cell walls than MHAP (∼0.1 μm). X-ray diffraction patterns indicated MHAP caused a higher crystallinity index (33.00) than SHAP (25.88), due to the deconstruction of amorphous cellulose. Fourier transform infrared spectroscopy indicated MHAP caused a higher crystallinity coefficient (1.20) than SHAP (1.12).

Subcritical water hydrolysis of rice straw for reducing sugar production with focus on degradation by-products and kinetic analysis

The competitive reactions of reducing sugar production and degradation in the subcritical water hydrolysis of rice straw were investigated to optimise reducing sugar yield. The optimised conditions (280°C, 20 MPa, rice straw concentration of 5 wt.% and agitation speed of 200 rpm) resulted in a reducing sugar yield of 0.346 g/g rice straw because of the enhanced reducing sugar production and decreased sugar degradation. The sugar yield increased when the temperature increased from 250°C to 280°C, but it decreased when the temperature further increased to 300°C because of the degradation of monosaccharides (e.g. glucose and xylose) into by-products (e.g. 2-methyltetrahydrofuran and acetic acid). A first-order reaction model was developed to elucidate the competitive reaction kinetics of sugar production and degradation at various temperatures. The highest reducing sugar yield based on the model was achieved at 280°C with the highest production and lowest degradation rates.