Rikesh Patel

Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces

Recent years have heralded the introduction of metasurfaces that advantageously combine the vision of sub-wavelength wave manipulation, with the design, fabrication and size advantages associated with surface excitation. An important topic within metasurfaces is the tailored rainbow trapping and selective spatial frequency separation of electromagnetic and acoustic waves using graded metasurfaces. This frequency dependent trapping and spatial frequency segregation has implications for energy concentrators and associated energy harvesting, sensing and wave filtering techniques. Different demonstrations of acoustic and electromagnetic rainbow devices have been performed, however not for deep elastic substrates that support both shear and compressional waves, together with surface Rayleigh waves; these allow not only for Rayleigh wave rainbow effects to exist but also for mode conversion from surface into shear waves. Here we demonstrate experimentally not only elastic Rayleigh wave rainbow trapping, by taking advantage of a stop-band for surface waves, but also selective mode conversion of surface Rayleigh waves to shear waves. These experiments performed at ultrasonic frequencies, in the range of 400–600 kHz, are complemented by time domain numerical simulations. The metasurfaces we design are not limited to guided ultrasonic waves and are a general phenomenon in elastic waves that can be translated across scales.

Widefield heterodyne interferometry using a custom CMOS modulated light camera

In this paper a method of taking widefield heterodyne interferograms using a prototype modulated light camera is described. This custom CMOS modulated light camera (MLC) uses analogue quadrature demodulation at each pixel to output the phase and amplitude of the modulated light as DC voltages. The heterodyne interference fringe patterns are generated using an acousto-optical frequency shifter (AOFS) in an arm of a Mach-Zehnder interferometer. Widefield images of fringe patterns acquired using the prototype MLC are presented. The phase can be measured to an accuracy of ±6.6°. The added value of this method to acquire widefield images are discussed along with the advantages.

Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy

Developments in additive manufacturing technology are serving to expand the potential applications. Critical developments are required in the supporting areas of measurement and in process inspection to achieve this. CM247LC is a nickel superalloy that is of interest for use in aerospace and civil power plants. However, it is difficult to process via selective laser melting (SLM) as it suffers from cracking during rapid cooling and solidification. This limits the viability of CM247LC parts created using SLM. To quantify part integrity, spatially resolved acoustic spectroscopy (SRAS) has been identified as a viable non-destructive evaluation technique. In this study, a combination of optical microscopy and SRAS was used to identify and classify the surface defects present in SLM-produced parts. By analysing the datasets and scan trajectories, it is possible to correlate morphological information with process parameters. Image processing was used to quantify porosity and cracking for bulk density measurement. Analysis of surface acoustic wave data showed that an error in manufacture in the form of an overscan occurred. Comparing areas affected by overscan with a bulk material, a change in defect density from 1.17% in the bulk material to 5.32% in the overscan regions was observed, highlighting the need to reduce overscan areas in manufacture.

Ultrastable heterodyne interferometer system using a CMOS modulated light camera

A novel ultrastable widefield interferometer is presented. This uses a modulated light camera (MLC) to capture and stabilise the interferogram in the widefield heterodyne interferometer. This system eliminates the contribution of piston phase to the interferogram without the need for common path optics and results in a highly stable widefield interferometer. The MLC uses quadrature demodulation circuitry built into each pixel to demodulate the light signal and extract phase information using an electronic reference signal. In contrast to the work previously presented [Opt. Express 19, 24546 (2011)], the reference signal is derived from one of the pixels on board the MLC rather than an external source. This local reference signal tracks the instantaneous modulation frequency detected by the other pixels and eliminates the contribution of piston phase to the interferogram, substantially removing the contributions of unwanted vibrations and microphonics to the interferogram. Interferograms taken using the ultrastable system are presented with one of the interferometer mirrors moving at up to 85 mm s(-1) over a variety of frequencies from 18 Hz to 20 kHz (giving a variation in optical path length of 220 μm, or 350 wavelengths at 62 Hz). This limit was the result of complex motion in the mirror mount rather than the stability limit of the system. The system is shown to be insensitive to pure piston phase variations equivalent to an object velocity of over 3 m s(-1).

Widefield two laser interferometry

A novel system has been developed that can capture the wide-field interference pattern generated by interfering two independent and incoherent laser sources. The interferograms are captured using a custom CMOS modulated light camera (MLC) which is capable of demodulating light in the megahertz region. Two stabilised HeNe lasers were constructed in order to keep the optical frequency difference (beat frequency) between the beams within the operational range of the camera.This system is based on previously reported work of an ultrastable heterodyne interferometer [Opt. Express 20, 17722 (2012)]. The system used an electronic feedback system to mix down the heterodyne signal captured at each pixel on the camera to cancel out the effects of time varying piston phase changes observed across the array. In this paper, a similar technique is used to track and negate the effects of beat frequency variations across the two laser pattern. This technique makes it possible to capture the full field interferogram caused by interfering two independent lasers even though the beat frequency is effectively random.As a demonstration of the systems widefield interferogram capture capability, an image of a phase shifting object is taken using a very simple two laser interferometer.

Widefield ultrastable heterodyne interferometry using a custom CMOS modulated light camera

A method of detecting optical heterodyne interference fringes using a custom CMOS modulated light camera array has been developed. Widefield phase images are generated using quadrature demodulation and are kept stable using a feedback system. © 2011 OSA