Rodney Andrews

Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites

Multiwall carbon nanotubes have been dispersed homogeneously throughout polystyrene matrices by a simple solution-evaporation method without destroying the integrity of the nanotubes. Tensile tests on composite films show that 1 wt % nanotube additions result in 36%–42% and ∼25% increases in elastic modulus and break stress, respectively, indicating significant load transfer across the nanotube-matrix interface. In situ transmission electron microscopy studies provided information regarding composite deformation mechanisms and interfacial bonding between the multiwall nanotubes and polymer matrix.

Continuous production of aligned carbon nanotubes: a step closer to commercial realization

High-purity aligned multi-walled carbon nanotubes MWNTs were synthesized through the catalytic decomposition of a ferrocene-xylene mixture at ; 6758C in a quartz tube reactor and over quartz substrates, with a conversion of ; 25% of the total hydrocarbon feedstock. Under the experimental conditions used, scanning electron microscope images reveal that the MWNT array grows perpendicular to the quartz substrates at an average growth rate of ; 25 mmrh. A process of this nature which does not require preformed substrates, and which operates at atmospheric pressure and moderate temperatures, could be scaled up for continuous or semi-continuous production of MWNTs. q 1999 Elsevier Science B.V. All rights reserved.

Enhanced flow in carbon nanotubes: Nanoscale hydrodynamics

Nanoscale structures that could mimic the selective transport and extraordinarily fast flow possible in biological cellular channels would have a wide range of potential applications. Here we show that liquid flow through a membrane composed of an array of aligned carbon nanotubes is four to five orders of magnitude faster than would be predicted from conventional fluid-flow theory. This high fluid velocity results from an almost frictionless interface at the carbon-nanotube wall.

Fabrication of Carbon Multiwall Nanotube/Polymer Composites by Shear Mixing

The dispersion of nanotubes in polymer matrices has been investigated as a means of deriving new and advanced engineering materials. These composite materials have been formed into fibers and thin films and their mechanical and electrical properties determined. The nanotube concentration at which conductivity was initiated (the percolation threshold) varied with host polymer. In poly(propylene), this was as low as 0.05 vol.-%, while higher concentrations were required for polystyrene and particularly for ABS. There was a small increase in elastic modulus and decrease in tensile strength at low nanotube loading, but as the concentration was increased there was a progressive increase in both strength and stiffness.

Model of carbon nanotube growth through chemical vapor deposition

Abstract This Letter outlines a model to account for the catalyzed growth of nanotubes by chemical vapor deposition. It proposes that their formation and growth is an extension of other known processes in which graphitic structures form over metal surfaces at moderate temperatures through the decomposition of organic precursors. Importantly, the model also states that the form of carbon produced depends on the physical dimensions of the catalyzed reactions. Experimental data are presented that correlate nanotube diameters to the size of the catalyst particles. Nanotube stability as a function of nanotube type, length and diameter are also investigated through theoretical calculations.

Carbon Nanotubes: Synthesis, Properties, and Applications

The goal of this article is to provide an updated and in-depth review of some of the most exciting and important developments in the processing and properties of carbon nanotubes. Nanotubes can be formed in various structures using several different processing methods. The synthesis methods used to produce specific kinds of nanotubes are discussed and a comparison is made between the methods used by researchers and industrial producers. This is followed by an overview and discussion of what makes carbon nanotubes interesting to so many: their mechanical, chemical, electrical, thermal, and optical properties. The article ends with a discussion of the future outlook for the study of carbon nanotubes.

NANOTUBE COMPOSITE CARBON FIBERS

Single walled carbon nanotubes (SWNTs) were dispersed in isotropic petroleum pitch matrices to form nanotube composite carbon fibers with enhanced mechanical and electrical properties. We find that the tensile strength, modulus, and electrical conductivity of a pitch composite fiber with 5 wt % loading of purified SWNTs are enhanced by ∼90%, ∼150%, and 340% respectively, as compared to the corresponding values in unmodified isotropic pitch fibers. These results serve to highlight the potential that exits for developing a spectrum of material properties through the selection of the matrix, nanotube dispersion, alignment, and interfacial bonding.

Purification and structural annealing of multiwalled carbon nanotubes at graphitization temperatures

In this work, we present a systematic study of the effects of graphitization on the structural perfection of multiwalled carbon nanotubes. High purity nanotubes were produced by a low temperature CVD method and subsequently annealed at temperatures between 1600 and 3000°C. The nanotubes were characterized for chemical purity, interlayer spacing, and defect healing. The graphitization procedure was found to remove residual metal catalyst in the nanotubes and reduce the wall defects as reflected in a reduced interlayer spacing between the graphene shells. Graphitization presents a low-cost, commercially viable method of purifying and ordering multiwall carbon nanotubes.

On the tensile strength distribution of multiwalled carbon nanotubes

Individual multiwalled carbon nanotubes grown by chemical vapor deposition (CVD) were tensile tested within the chamber of an electron microscope using an atomic force microscope-based technique. Weibull–Poisson statistics could accurately model the nanotube tensile strength data. Weibull shape and scale parameters of 1.7 and 109GPa were obtained. The former reflects a wide variability in strength similar to that observed for high-modulus graphite fibers, while the latter indicates that the irregular CVD-grown tube wall structure requires, in some cases, higher breaking forces than more regular tube wall structures. This apparent strengthening mechanism is most likely caused by an enhanced interaction between the walls of the nanotube.

Acute pulmonary response of mice to multi-wall carbon nanotubes

Widespread use of carbon nanotubes is predicted for future and concerns have been raised about their potential health effects. The present study determined the pulmonary response of mice to multi-wall carbon nanotubes (MWCNTs). The MWCNT suspension in sterile phosphate-buffered saline (PBS) was introduced into mice lungs by oropharyngeal aspiration. Female C57Bl mice were treated with either 20 or 40 μg of MWCNTs in 40 μl PBS and control groups received equal volume of PBS. From each group, half of the mice were euthanized at day 1 and the remaining half at day 7 post treatment. Bronchoalveolar lavage (BAL) fluids, serum, and lung tissue samples were analyzed for inflammatory and oxidative stress markers. The results showed significant cellular influx by a single exposure to MWCNTs. Yields of total cells and the number of polymorphonuclear leukocytes in BAL cells were significantly elevated in MWCNT-treated mice post-treatment days 1 and 7. Analysis of cell-free BAL fluids showed significantly increased levels of total proteins, lactate dehydrogenase, tumor necrosis factor-α, interleukin-1β, mucin, and surfactant protein-D (SP-D) in MWCNT-treated mice at day 1 post treatment. However, these biomarkers returned to basal levels by day 7 post exposure except mucin and SP-D. An increase in the urinary level of 8-hydroxy-2’-deoxyguanosine in mice treated with MWCNT suggested systemic oxidative stress. Western analysis of lung tissue showed decreased levels of extracellular superoxide dismutase (SOD) protein in MWCNT-treated mice but copper/zinc and manganese SOD remained unchanged. It is concluded that a single treatment of MWCNT is capable of inducing cytotoxic and inflammatory response in the lungs of mice.