Rodolfo Picchio

Surface Investigation of Photo-Degraded Wood by Colour Monitoring, Infrared Spectroscopy, and Hyperspectral Imaging

The aim of this investigation is to study the changes occurring on the surface of poplar wood exposed to artificial irradiation in a Solar Box. Colour changes were monitored with a reflectance spectrophotometer. Surface chemical modifications were evaluated by measuring the infrared spectra. Hyperspectral imaging was also applied to study the surface wood changes in the visible-near infrared and the short wave infrared wavelength ranges. The data obtained from the different techniques were compared to find the possible correlations in order to evaluate the applicability of the Hyperspectral imaging to investigate wood modifications in a non-invasive modality. The study of colour changes showed an important variation due to photo-irradiation which is the greatest change occurring within the first 24 hours. Infrared spectroscopy revealed that lignin degrades mainly in the first 48 hours. Concerning Hyperspectral imaging, the spectral features in the visible-near infrared range are mainly linked to the spectral shape, whereas in the short wave infrared cellulose and lignin affect shape and reflectance levels. The proposed approach showed that a correlation can be established between colour variation and wood degradation in the visible-near infrared range; furthermore in the short wave infrared region surface chemical changes can be assessed.

Colour measurements of surfaces to evaluate the restoration materials.

In this paper two case studies on the application of colour measurements for the evaluation of some restoration materials are discussed. The materials related to the research are: watercolours employed in restoration of wall paintings and preservative/consolidants for wood artifacts. Commercial watercolours, supplied by Maimeri, Windsor&Newton and Talens factories have been tested. Colour measurements have been performed by means of a reflectance spectrophotometer (RS) before and after accelerated ageing of watercolours at 92% relative humidity (RH) and in a Solar Box chamber. The experimental results show that watercolours based on natural earths and artificial ultramarine undergo the main colour changes, expressed as L*, a* and b* variations and total colour difference (▵E*). In the other cases colour differences depend on both watercolour typology and suppliers. The other example concerns the evaluation of colour change due to surface treatment of Poplar (Populus sp.) and chestnut (Castanea sativa L.) wood samples. The wooden samples have been treated with a novel organic preservative/consolidant product that has been tested also in a real case as comparison. The treated samples have been artificially aged in Solar Box chamber equipped with a 280 nm UV filter. Colour has been measured before and after the artificial ageing by means of a RS. Colour changes have been determined also for the main door of an historical mansion in Viterbo, made of chestnut wood, and exposed outdoors.

Application of spectroscopic techniques for the study of the surface changes in poplar wood and possible implications in conservation of wooden artefacts

The aim of this work is to study the surface modifications of poplar (Populus spp.) wood by reflectance spectrophotometry and Fourier Transform Infrared (FT-IR) spectroscopy in order to understand the mechanisms that cause the changes and to suggest possible solutions to avoid the degradation phenomena. Since colour changes on wood surfaces are due to photo degradation of its chemical constituents, the study of the relationship between CIELAB colour changes and changes in chemical composition due to irradiation is of practical importance both in cultural heritage and in contemporary artefacts and objects. Concerning the surface protection of wood, starting from the results obtained by testing different commercial products, the attention has been focused on Linfoil®, a novel organic preservative/consolidant product that seems to attract a great interest in the field of conservation of wooden artefacts. Linfoil® was chosen and analysed in order to understand its composition and its time stability using reflectance spectrophotometry, FT-IR spectroscopy and analytical pyrolysis coupled to a gas chromatographic-mass spectrometric system. Colour monitoring allowed to find that wood surface colour undergoes an important variation due to photo-irradiation, occurring within the first 24 hours and mainly due to L* decrease and b* increase. Though Linfoil® treatment modifies wood colour, nevertheless it seems to protect wood surface by reducing the yellowish. FT-IR spectroscopy allowed to investigate the rate of photo-degradation of wood surface due to lignin oxidation. The most important result is that a correlation of the colour changes may be derived with the photo-degradation of lignin obtained by FT-IR analysis.

Wood anatomy and technological properties of an endangered species: Picconia Azorica (Oleaceae)

Picconia azorica (Tutin) Knobl. is an Azorean endemic species of the Oleaceae, exploited over centuries and recently classified as endangered. It suffers from reduction and fragmentation of its habitat, and from competition with exotic species. Wood anatomy was examined and compared with Picconia excelsa, enhancing our knowledge about the genus Picconia which contains only these two species. Macroscopic and technological characterizations by colour, pH, wood density, compression and bending strengths, shrinkages, static quality factor, ash content and Higher Heating Value were investigated and compared with other Oleaceae and other hardwoods. At the anatomical level, P. azorica does not differ from P. excelsa, except for the number of vessels and rays per mm2 and the ray type. The technological features support the profitable use of P. azorica for the furniture industry instead of biomass production. Because of its valuable wood, P. azorica might be reconsidered and its properties emphasized to combat the species’ decline and to encourage the restoration of its habitat.

Light-induced color changes and chemical modification of treated and untreated chestnut wood surface

Abstract The aim of this work is to study the surface modifications of chestnut (Castanea sativa Mill.) wood by reflectance spectrophotometry and Fourier transform infrared spectroscopy (FTIR) in order to understand the mechanisms that cause changes and to suggest possible solutions to avoid degradation phenomena. The experimental data were statistically treated to evaluate their significance. Concerning the surface protection of wood, starting from the results obtained by testing different commercial products, attention was focused on a novel organic preservative/consolidant product (Linfoil®) that has attracted great interest in the field of conservation of wooden artifacts. Color monitoring showed that wood surface color undergoes an important variation due to photoirradiation, occurring within the first 24 hours and mainly due to L* decrease and b* increase. Though the protective treatment modifies wood color, nevertheless the product tested seems to protect the wood surface by reducing photoyellowing. FTIR analysis indicated that irradiation caused the degradation of lignin and increased the concentration of the chromophore groups on the wood surface. Changes in the chromaticity coordinates can be linked to the degradation of lignin and to increase of the concentration of carbonyl groups.

Assessment of the impact of forest harvesting operations on the physical parameters and microbiological components on a Mediterranean sandy soil in an Italian stone pine stand

Forest harvesting operations may have a significant impact on soil physical properties by reducing its porosity and organic functions. Soil variations, in particular bulk density and total porosity, caused by external perturbations as soil becomes compacted due to machinery passes, can lead to changes in biogeochemical cycles that have consequences on soil ecosystems. This study investigated how the impact of forest operations and the elapsed time from harvest can influence: (1) the physical–chemical characteristics of soil and (2) the nitrogen-fixing and nitrifying microbial communities. The study area is located inside the Regional Park of Migliarino, San Rossore, Massaciuccoli (Pisa, Italy). In the study area, the soil has been classified as recent sands with sandy loam texture and slightly calcareous (USDA Soil Taxonomy classification). Soil samples were collected in patchy cut areas (strip cut) of Pinus pinea stand that was harvested in two steps: half area in 2006 and the rest in 2011. Soil samples were collected also in a control area (not harvested) with similar stand and soil characteristics. Statistical analysis was preceded by a test of normality (Kolmogorov–Smirnov test) and a variance homogeneity test (Levene’s test). Considering the dependence of the variables studied (physical and chemical soil characteristics), a MANOVA test and a post hoc Tukey HSD test were applied to determine statistical difference among the three treatments: harvested 2006, harvested 2011 and not harvested. The results did not indicate significant variations to the parameters of shear and penetration resistance, though soil bulk density and total porosity were significantly altered in the short period since forestry operations occurred. These physical changes induced qualitative (presence/absence and number of species) and quantitative (abundance and spatial evenness of the species) variations in the nitrogen-fixing and nitrifying microbial communities.

Protective behaviour monitoring on wood photo-degradation by spectroscopic techniques coupled with chemometrics

This paper reports the investigation on the effect of protective materials on poplar (Populus sp.) wood modifications as consequence of artificial photo-degradation in controlled environment. The novelty of this work is to try to understand what happens to wood surface under the protective layer. Shellac, beeswax and Linfoil® were tested to compare traditional and novel products generally used for wood. The samples, uncovered and covered by these protective layers, were artificially aged. Colour and chemical modifications due to ageing were investigated at different time intervals by reflectance spectrophotometry, Fourier transform infrared spectroscopy and hyperspectral imaging. The obtained data were elaborated by statistical and chemometric tools in order to verify their significance and to assess the relationship between groups of measurements. The results highlighted that shellac, beeswax and Linfoil® materials have a very low protective effect on wood photo-degradation for long times of exposure, by little reducing the changes of wood components.

A new approach for the modelling of chestnut wood photo-degradation monitored by different spectroscopic techniques

The aim of this work is to study the colour and chemical modifications of the surfaces in chestnut wood samples as a consequence of irradiating in a controlled environment. The changes were investigated by a new analytical approach by combining traditional techniques such as reflectance spectrophotometry in the visible range and Fourier transform infrared spectroscopy with new hyperspectral imaging, in order to obtain forecast models to describe the phenomenon. The statistical elaboration of the experimental data allowed to validate the measurements and to obtain models enabling to relate the investigated parameters; the elaboration of the hyperspectral images by chemometric methods allowed for studying the changes in the reflectance spectra. A result of great importance is the possibility to correlate the oxidation of wood chemical components with the colour change in a totally non-invasive modality. This result is particularly relevant in the field of cultural heritage and in general in the control processes of wooden materials.

Hyperspectral imaging as a technique for investigating the effect of consolidating materials on wood

Abstract. The focus of this study was to investigate the potential of hyperspectral imaging (HSI) in the monitoring of commercial consolidant products applied on wood samples. Poplar (Populus spp.) and walnut (Juglans Regia L.) were chosen for the consolidant application. Both traditional and innovative products were selected, based on acrylic, epoxy, and aliphatic compounds. Wood samples were stressed by freeze/thaw cycles in order to cause material degradation without the loss of wood components. Then the consolidant was applied under vacuum. The samples were finally artificially aged for 168 h in a solar box chamber. The samples were acquired in the short wave infrared (1000 to 2500 nm) range by SISUChema XL™ device (Specim, Finland) after 168 h of irradiation. As comparison, color measurement was also used as an economic, simple, and noninvasive technique to evaluate the deterioration and consolidation effects on wood. All data were then processed adopting a chemometric approach finalized to define correlation models, HSI based, between consolidating materials, wood species, and short-time aging effects.

Study of consolidating materials applied on wood by hyperspectral imaging

The focus of this study was addressed to investigate the potentiality of HyperSpectral Imaging (HSI) in the monitoring of commercial consolidant products applied on wood samples. Poplar (Populus Sp.) and walnut (Juglans Regia L.) were chosen for the consolidant application. Both traditional and innovative products were selected, based on acrylic, epoxy and aliphatic compounds. Wood samples were stresses by freeze/thaw cycles in order to cause material degradation. Then the consolidants were applied under vacuum. The samples were finally artificially aged for 168 hours in a solar box chamber. The samples were acquired in the SWIR (1000-2500 nm) range by SISUChema XL™ device (Specim, Finland) after 168 hours of irradiation. As comparison, color measurement was also used as economic, simple and noninvasive technique to evaluate the deterioration and consolidation effects on wood. All data were then processed adopting a chemometric approach finalized to define correlation models, HSI based, between consolidating materials, wood species and short time ageing effects.