Roger Vonbank

Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment

We present direct evidence of the release of synthetic nanoparticles from urban applications into the aquatic environment. We investigated TiO(2) particles as these particles are used in large quantities in exterior paints as whitening pigments and are to some extent also present in the nano-size range. TiO(2) particles were traced from exterior facade paints to the discharge into surface waters. We used a centrifugation based sample preparation which recovers TiO(2) particles between roughly 20 and 300nm. Analytical electron microscopy revealed that TiO(2) particles are detached from new and aged facade paints by natural weather conditions and are then transported by facade runoff and are discharged into natural, receiving waters. Microscopic investigations are confirmed by bulk chemical analysis. By combining results from microscopic investigations with bulk chemical analysis we calculated the number densities of synthetic TiO(2) particles in the runoff.

Release of silver nanoparticles from outdoor facades

In this study we investigate the release of metallic silver nanoparticles (Ag-NP) from paints used for outdoor applications. A facade panel mounted on a model house was exposed to ambient weather conditions over a period of one year. The runoff volume of individual rain events was determined and the silver and titanium concentrations of 36 out of 65 runoff events were measured. Selected samples were prepared for electron microscopic analysis. A strong leaching of the Ag-NP was observed during the initial runoff events with a maximum concentration of 145 micro Ag/l. After a period of one year, more than 30% of the Ag-NP were released to the environment. Particles were mostly <15 nm and are released as composite colloids attached to the organic binders of the paint. Microscopic results indicate that the Ag-NP are likely transformed to considerably less toxic forms such as Ag2S.

Leaching of Biocides from Façades under Natural Weather Conditions

Biocides are included in organic building façade coatings as protection against biological attack by algae and fungi but have the potential to enter the environment via leaching into runoff from wind driven rain. The following field study correlates wind driven rain to runoff and measured the release of several commonly used organic biocides (terbutryn, Irgarol 1051, diuron, isoproturon, OIT, DCOIT) in organic façade coatings from four coating systems. During one year of exposure of a west oriented model house façade in the Zurich, Switzerland area, an average of 62.7 L/m(2), or 6.3% of annual precipitation came off the four façade panels installed as runoff. The ISO method for calculating wind driven rain loads is adapted to predict runoff and can be used in the calculation of emissions in the field. Biocide concentrations tend to be higher in the early lifetime of the coatings and then reach fairly consistent levels later, generally ranging on the order of mg/L or hundreds of μg/L. On the basis of the amount remaining in the film after exposure, the occurrence of transformation products, and the calculated amounts in the leachate, degradation plays a significant role in the overall mass balance.

Characterization of materials released into water from paint containing nano-SiO2.

In order to assess the possible risks of applications containing engineered nanomaterials, it is essential to generate more data about their release and exposure, so far largely overlooked areas of research. The aim of this work was to study the characterization of the materials released from paint containing nano-SiO2 during weathering and exposure to water. Panels coated with nano-SiO2 containing paint and a nano-free reference paint were exposed to accelerated weathering cycles in a climate chamber. The total release of 89 six-hour cycles of UV-illumination and precipitation was 2.3% of the total SiO2 contained in the paint. Additional tests with powdered and aged paint showed that the majority of the released Si was present in dissolved form and that only a small percentage was present in particulate and nano-particulate form. TEM imaging of the leachates indicated that the majority of the particulate Si was contained in composites together with Ca, representing the paint matrix, and only few single dispersed SiO2-NPs were detected. The results suggest that toxicological and ecotoxicological studies need to consider that the released particles may have been transformed or are embedded in a matrix.

Release and environmental impact of silver nanoparticles and conventional organic biocides from coated wooden façades

This study represents for the first time a comprehensive assessment of functionality and environmental impacts of metallic silver nanoparticles (Ag-NP) compared to conventional organic biocides. Four different transparent, hydrophobic coatings of wooden outdoor façades were tested during one year outdoor weathering. The total silver release from products with Ag-NP was proportional to the overall erosion of the coating. The results indicate that the Ag-NPs are likely transformed to silver complexes, which are considerably less toxic than ionic silver. The protective effect of the silver containing coatings against mold, blue stain and algae was insufficient, even in immaculate and non-weathered conditions. The release of organic biocides from conventional coatings was dependent on the weather conditions, the type of biocide and the use in the base or top coat. The conventional coating showed a good overall performance free from mold, blue stain and algae until the end of the test period.

A simple method to determine the specific heat capacity of thermal insulations used in building construction

A simple transient test using the widespread heat flow meter apparatus (HFM) for thermal conductivity measurements is presented by which the specific heat capacity of thermal insulation materials, used in building construction can be determined with sufficient accuracy. The measured temperature evolution on specific sites of the specimens is evaluated numerically by the system identification technique.