Rogerta Dalipi

Multi-element analysis of vegetal foodstuff by means of low power total reflection X-ray fluorescence (TXRF) spectrometry

In this work, an analytical methodology in combination with a low power benchtop total reflection X-ray fluorescence (TXRF) system has been developed for multi-elemental analysis of vegetal materials. An easy and rapid sample preparation consisting in suspending 20mg of sample in de-ionized water showed to be the most suitable for this kind of samples. However, for comparison purposes, two digestion procedures were also applied. A set of fifteen certified reference materials and three real vegetal samples were employed for the quantitative determination of K, Ca, Mn, Fe, Cu, Zn, Br, Rb, Sr, Pb, As and Sn. All the parameters affecting sample preparation and TXRF measurements conditions were carefully evaluated. Accurate and precise results were obtained for mid-high Z elements (Mn-Sr) using internal standardization as quantification approach, while for light Z elements (K and Ca), due to absorption effects, an improvement of analytical results by external calibration was necessary.

Comparison between rice husk ash grown in different regions for stabilizing fly ash from a solid waste incinerator.

The Stabilization of heavy metals from municipal solid waste incineration (MSWI) fly ash by rice husk ash (RHA) is under intense study as an effective strategy to recover and reuse industrial and agricultural waste together. We compare the metal entrapment performances of RHA from different Asian rice sources – namely from Japonica rice grown in Italy and Indica rice grown in India – Physicochemical and morphological characterization of the final stabilized material show that the same thermal treatment may result in marked structural differences in the silica contained in the two RHA. Remarkably, one of them displays a crystalline silica content, although obtained by a thermal treatment below 800 °C. We also find that the presence of an alkali metal ion (potassium) in the rice husk plays a crucial role in the attainment of the final silica phase. These physicochemical differences are mirrored by different stabilization yields by the two RHA.

Determination of trace elements in Italian wines by means of total reflection X-ray fluorescence spectroscopy

This work was performed to highlight the advantages of total reflection X-ray fluorescence spectroscopy (TXRF) for multi-elemental qualitative and quantitative analysis of wine. Indeed the International Organization of Vine and Wine (OIV) selected some potentially toxic elements and proposed limit values for their concentration in wines. Direct TXRF analysis of nine wine samples from Emilia Romagna region of Italy was performed in two different laboratories: Italy and Japan. Wine dehydration was also evaluated as sample conservation mean. Traces of Fe, Cu, Zn and Pb are present in all the analysed samples, with concentrations lower than the limits established by the OIV. The target hazard quotients (THQs) were also calculated for seven elements (Cl, Mn, Fe, Ni, Cu, Zn and Sr) to determine their potential detrimental effects. The results show that TXRF is a fast, simple and accurate analytical technique for trace element analysis of wine. Moreover, dehydration is an effective way to store wine samples for further elemental analysis.

Elemental analysis of tree leaves by total reflection X-ray fluorescence: New approaches for air quality monitoring

This work shows that total reflection X-ray fluorescence (TXRF) is a fast, easy and successful tool to determine the presence of potentially toxic elements in atmospheric aerosols precipitations on tree leaves. Leaves are collected in eleven parks of different geographical areas of the Brescia city, Northern Italy, for environmental monitoring purposes. Two sample preparation procedures are considered: microwave acid digestion and the novel SMART STORE method for direct analysis. The latter consists in sandwiching a portion of the leaf between two organic foils, metals free, to save it from contamination and material loss. Mass composition of macro, micro and trace elements is calculated for digested samples, while relative elemental amount are obtained from direct analysis. Washed and unwashed leaves have a different composition in terms of trace elements. Differentiation occurs according to Fe, Pb and Cu contributions, considered as most representative of air depositions, and probably related to anthropogenic sources. Direct analysis is more representative of the composition of air precipitations. Advantages and drawbacks of the presented methods of sample preparation and TXRF analysis are discussed. Results demonstrate that TXRF allows to perform accurate and precise quantitative analysis of digested samples. In addition, direct analysis of leaves may be used as a fast and simple method for screening in the nanograms range.

Integrated management of ash from industrial and domestic combustion: a new sustainable approach for reducing greenhouse gas emissions from energy conversion

This work supports, for the first time, the integrated management of waste materials arising from industrial processes (fly ash from municipal solid waste incineration and coal fly ash), agriculture (rice husk ash), and domestic activities (ash from wood biomass burning in domestic stoves). The main novelty of the paper is the reuse of wood pellet ash, an underestimated environmental problem, by the application of a new technology (COSMOS-RICE) that already involves the reuse of fly ashes from industrial and agricultural origins. The reaction mechanism involves carbonation: this occurs at room temperature and promotes permanent carbon dioxide sequestration. The obtained samples were characterized using XRD and TGA (coupled with mass spectroscopy). This allowed quantification of the mass loss attributed to different calcium carbonate phases. In particular, samples stabilized using wood pellet ash show a weight loss, attributed to the decomposition of carbonates greater than 20%. In view of these results, it is possible to conclude that there are several environmental benefits from wood pellet ash reuse in this way. In particular, using this technology, it is shown that for wood pellet biomass the carbon dioxide conversion can be considered negative.

Comprehensive approach to the validation of the standard method for total reflection X-ray fluorescence analysis of water

In this work, we present the validation of the chemical method for total reflection X-ray fluorescence (TXRF) analysis of water, proposed as a standard to the International Standard Organization. The complete experimental procedure to define the linear calibration range, elements sensitivities, limits of detection and quantification, precision and accuracy is presented for a commercial TXRF spectrometer equipped with Mo X-ray tube. Least squares linear regression, including all statistical tests is performed separately for each element of interest to extract sensitivities. Relative sensitivities with respect to Ga, as internal standard, are calculated. Accuracy and precision of the quantification procedure using Ga as internal standard is evaluated with reference water samples. A detailed discussion on the calibration procedure and the limitation of the use of this method for quantitative analysis of water is presented.