Rosalinda Gaudio

Position-dependent local detection efficiency in a nanowire superconducting single-photon detector

We probe the local detection efficiency in a nanowire superconducting single-photon detector along the cross-section of the wire with a far subwavelength resolution. We experimentally find a strong variation in the local detection efficiency of the device. We demonstrate that this effect explains previously observed variations in NbN detector efficiency as a function of device geometry.

Inhomogeneous critical current in nanowire superconducting single-photon detectors

A superconducting thin film with uniform properties is the key to realize nanowire superconducting single-photon detectors (SSPDs) with high performance and high yield. To investigate the uniformity of NbN films, we introduce and characterize simple detectors consisting of short nanowires with length ranging from 100 nm to 15 μm. Our nanowires, contrary to meander SSPDs, allow probing the homogeneity of NbN at the nanoscale. Experimental results, endorsed by a microscopic model, show the strongly inhomogeneous nature of NbN films on the sub-100 nm scale.

Photon-number-resolving superconducting nanowire detectors

In recent years, photon-number-resolving (PNR) detectors have attracted great interest, mainly because they can play a key role in diverse application fields. A PNR detector with a large dynamic range would represent an ideal photon detector, bringing the linear response of conventional analogue detectors down to the single-photon level. Several technologies, such as InGaAs single photon avalanche detectors (SPADs), arrays of silicon photomultipliers, InGaAs SPADs with self-differencing circuits and transition edge sensors have shown photon number resolving capability. Superconducting nanowires provide free-running single-photon sensitivity from visible to mid-infrared frequencies, low dark counts, excellent timing resolution (<60 ps) and short dead time (~10 ns), at an easily accessible temperature (2–3 K), but they do not inherently resolve the photon number. In this framework, PNR detectors based on arrays of superconducting nanowires have been proposed. In this article we describe a number of methods and device configurations that have been pursued to obtain PNR capability using superconducting nanowire detectors.

Photon-counting and analog operation of a 24-pixel photon number resolving detector based on superconducting nanowires

We investigate the transition from the photon-counting to the linear operation mode in a large-dynamic range photon-number-resolving-detector (PNRD). A 24-pixel photon-number-resolving-detector, based on superconducting nanowires in a series configuration, has been fabricated and characterized. The voltage pulses, generated by the pixels, are summed up into a single readout pulse whose height is proportional to the detected photon number. The device can resolve up to twenty-five distinct output levels corresponding to the detection of n = 0-24 photons. Due to its large dynamic range, high sensitivity, high speed and wide wavelength range, this device has potential for linear detection in the few tens of photons range. We show its application in the detection of analog optical signals at frequencies up to few hundred MHz and investigate the limits related to the finite number of pixels and to the pixels dead time.

Experimental investigation of the detection mechanism in WSi nanowire superconducting single photon detectors

We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors (SSPDs). To this purpose, we fabricated a 250nm wide and 250nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from

The effect of magnetic field on the intrinsic detection efficiency of superconducting single-photon detectors

\lambda

Probing the hotspot interaction length in NbN nanowire superconducting single photon detectors

= 900 nm to

Photon counting with a 24-pixel SSPD based photon number resolving detector

\lambda

Resolving Subwavelength Variations in the Response of NbN Nanowire Single Photon Detectors

= 1650 nm. Tomographic measurements show that the detector response depends on the total excitation energy only. Moreover, for energies Et > 0.8eV the current energy relation is linear, similar to what was observed in NbN nanowires, whereas the current-energy relation deviates from linear behaviour for total energies below 0.8eV.

A New Picture of Inhomogeneities in Nanowire Superconducting Single Photon Detectors

We experimentally investigate the effect of a magnetic field on photon detection in superconducting single-photon detectors (SSPDs). At low fields, the effect of a magnetic field is through the direct modification of the quasiparticle density of states of the superconductor, and magnetic field and bias current are interchangeable, as is expected for homogeneous dirty-limit superconductors. At the field where a first vortex enters the detector, the effect of the magnetic field is reduced, up until the point where the critical current of the detector starts to be determined by flux flow. From this field on, increasing the magnetic field does not alter the detection of photons anymore, whereas it does still change the rate of dark counts. This result points at an intrinsic difference in dark and photon counts, and also shows that no enhancement of the intrinsic detection efficiency of a straight SSPD wire is achievable in a magnetic field.