Ruben Vanholme

Lignin Biosynthesis and Structure

Lignin is the generic term for a large group of aromatic polymers resulting from the oxidative combinatorial coupling of 4-hydroxyphenylpropanoids ([Boerjan et al., 2003][1]; [Ralph et al., 2004][2]). These polymers are deposited predominantly in the walls of secondarily thickened cells, making them

Reductive lignocellulose fractionation into soluble lignin-derived phenolic monomers and dimers and processable carbohydrate pulps

A catalytic lignocellulose biorefinery process is presented, valorizing both polysaccharide and lignin components into a handful of chemicals. To that end, birch sawdust is efficiently delignified through simultaneous solvolysis and catalytic hydrogenolysis in the presence of a Ru on carbon catalyst (Ru/C) in methanol under a H2 atmosphere at elevated temperature, resulting in a carbohydrate pulp and a lignin oil. The lignin oil yields above 50% of phenolic monomers (mainly 4-n-propylguaiacol and 4-n-propylsyringol) and about 20% of a set of phenolic dimers, relative to the original lignin content, next to phenolic oligomers. The structural features of the lignin monomers, dimers and oligomers were identified by a combination of GC/MS, GPC and 2D HSQC NMR techniques, showing interesting functionalities for forthcoming polymer applications. The effect of several key parameters like temperature, reaction time, wood particle size, reactor loading, catalyst reusability and the influence of solvent and gas were examined in view of the phenolic product yield, the degree of delignification and the sugar retention as a first assessment of the techno-economic feasibility of this biorefinery process. The separated carbohydrate pulp contains up to 92% of the initial polysaccharides, with a nearly quantitative retention of cellulose. Pulp valorization was demonstrated by its chemocatalytic conversion to sugar polyols, showing the multiple use of Ru/C, initially applied in the hydrogenolysis process. Various lignocellulosic substrates, including genetically modified lines of Arabidopsis thaliana, were finally processed in the hydrogenolytic biorefinery, indicating lignocellulose rich in syringyl-type lignin, as found in hardwoods, as the ideal feedstock for the production of chemicals.

Metabolic engineering of novel lignin in biomass crops.

Lignin, a phenolic polymer in the secondary wall, is the major cause of lignocellulosic biomass recalcitrance to efficient industrial processing. From an applications perspective, it is desirable that second-generation bioenergy crops have lignin that is readily degraded by chemical pretreatments but still fulfill its biological role in plants. Because plants can tolerate large variations in lignin composition, often without apparent adverse effects, substitution of some fraction of the traditional monolignols by alternative monomers through genetic engineering is a promising strategy to tailor lignin in bioenergy crops. However, successful engineering of lignin incorporating alternative monomers requires knowledge about phenolic metabolism in plants and about the coupling properties of these alternative monomers. Here, we review the current knowledge about lignin biosynthesis and the pathways towards the main phenolic classes. In addition, the minimal requirements are defined for molecules that, upon incorporation into the lignin polymer, make the latter more susceptible to biomass pretreatment. Numerous metabolites made by plants meet these requirements, and several have already been tested as monolignol substitutes in biomimetic systems. Finally, the status of detection and identification of compounds by phenolic profiling is discussed, as phenolic profiling serves in pathway elucidation and for the detection of incorporation of alternative lignin monomers.

Caffeoyl Shikimate Esterase (CSE) Is an Enzyme in the Lignin Biosynthetic Pathway in Arabidopsis

Lignin Biosynthesis Complications Lignin is a polymer that lends its sturdy properties to wood and makes plant cell walls tougher, which creates problems for chemists converting cellulosic plant biomass into biofuels. Vanholme et al. (p. 1103, published online 15 August; see the cover) have identified a new step in the biosynthetic pathway of lignin in Arabidopsis in which caffeoyl shikimate esterase catalyzes synthesis of caffeate. Cellulose from mutant plants, which had reduced amounts of lignin, was more efficiently processed into glucose. A key enzyme involved in lignin biosynthesis is identified and characterized in the model plant Arabidopsis. Lignin is a major component of plant secondary cell walls. Here we describe caffeoyl shikimate esterase (CSE) as an enzyme central to the lignin biosynthetic pathway. Arabidopsis thaliana cse mutants deposit less lignin than do wild-type plants, and the remaining lignin is enriched in p-hydroxyphenyl units. Phenolic metabolite profiling identified accumulation of the lignin pathway intermediate caffeoyl shikimate in cse mutants as compared to caffeoyl shikimate levels in the wild type, suggesting caffeoyl shikimate as a substrate for CSE. Accordingly, recombinant CSE hydrolyzed caffeoyl shikimate into caffeate. Associated with the changes in lignin, the conversion of cellulose to glucose in cse mutants increased up to fourfold as compared to that in the wild type upon saccharification without pretreatment. Collectively, these data necessitate the revision of currently accepted models of the lignin biosynthetic pathway.

A Systems Biology View of Responses to Lignin Biosynthesis Perturbations in Arabidopsis

The combination of metabolomics and transcriptomics on Arabidopsis thaliana lines mutated in 10 steps of the lignin pathway provides insight into monolignol biosynthesis and the metabolic network in which it is embedded. In addition, this work reveals novel pathways and genes associated with lignin biosynthesis. Lignin engineering is an attractive strategy to improve lignocellulosic biomass quality for processing to biofuels and other bio-based products. However, lignin engineering also results in profound metabolic consequences in the plant. We used a systems biology approach to study the plant’s response to lignin perturbations. To this end, inflorescence stems of 20 Arabidopsis thaliana mutants, each mutated in a single gene of the lignin biosynthetic pathway (phenylalanine ammonia-lyase1 [PAL1], PAL2, cinnamate 4-hydroxylase [C4H], 4-coumarate:CoA ligase1 [4CL1], 4CL2, caffeoyl-CoA O-methyltransferase1 [CCoAOMT1], cinnamoyl-CoA reductase1 [CCR1], ferulate 5-hydroxylase [F5H1], caffeic acid O-methyltransferase [COMT], and cinnamyl alcohol dehydrogenase6 [CAD6], two mutant alleles each), were analyzed by transcriptomics and metabolomics. A total of 566 compounds were detected, of which 187 could be tentatively identified based on mass spectrometry fragmentation and many were new for Arabidopsis. Up to 675 genes were differentially expressed in mutants that did not have any obvious visible phenotypes. Comparing the responses of all mutants indicated that c4h, 4cl1, ccoaomt1, and ccr1, mutants that produced less lignin, upregulated the shikimate, methyl-donor, and phenylpropanoid pathways (i.e., the pathways supplying the monolignols). By contrast, f5h1 and comt, mutants that provoked lignin compositional shifts, downregulated the very same pathways. Reductions in the flux to lignin were associated with the accumulation of various classes of 4-O- and 9-O-hexosylated phenylpropanoids. By combining metabolomic and transcriptomic data in a correlation network, system-wide consequences of the perturbations were revealed and genes with a putative role in phenolic metabolism were identified. Together, our data provide insight into lignin biosynthesis and the metabolic network it is embedded in and provide a systems view of the plant’s response to pathway perturbations.

Lignin biosynthesis perturbations affect secondary cell wall composition and saccharification yield in Arabidopsis thaliana

BackgroundSecond-generation biofuels are generally produced from the polysaccharides in the lignocellulosic plant biomass, mainly cellulose. However, because cellulose is embedded in a matrix of other polysaccharides and lignin, its hydrolysis into the fermentable glucose is hampered. The senesced inflorescence stems of a set of 20 Arabidopsis thaliana mutants in 10 different genes of the lignin biosynthetic pathway were analyzed for cell wall composition and saccharification yield. Saccharification models were built to elucidate which cell wall parameters played a role in cell wall recalcitrance.ResultsAlthough lignin is a key polymer providing the strength necessary for the plant’s ability to grow upward, a reduction in lignin content down to 64% of the wild-type level in Arabidopsis was tolerated without any obvious growth penalty. In contrast to common perception, we found that a reduction in lignin was not compensated for by an increase in cellulose, but rather by an increase in matrix polysaccharides. In most lignin mutants, the saccharification yield was improved by up to 88% cellulose conversion for the cinnamoyl-coenzyme A reductase1 mutants under pretreatment conditions, whereas the wild-type cellulose conversion only reached 18%. The saccharification models and Pearson correlation matrix revealed that the lignin content was the main factor determining the saccharification yield. However, also lignin composition, matrix polysaccharide content and composition, and, especially, the xylose, galactose, and arabinose contents influenced the saccharification yield. Strikingly, cellulose content did not significantly affect saccharification yield.ConclusionsAlthough the lignin content had the main effect on saccharification, also other cell wall factors could be engineered to potentially increase the cell wall processability, such as the galactose content. Our results contribute to a better understanding of the effect of lignin perturbations on plant cell wall composition and its influence on saccharification yield, and provide new potential targets for genetic improvement.

Mass spectrometry-based sequencing of lignin oligomers

Although the primary structure of proteins, nucleic acids, and carbohydrates can be readily determined, no sequencing method has been described yet for the second most abundant biopolymer on earth (i.e. lignin). Within secondary-thickened plant cell walls, lignin forms an aromatic mesh arising from the combinatorial radical-radical coupling of monolignols and many other less abundant monomers. This polymerization process leads to a plethora of units and linkage types that affect the physicochemical characteristics of the cell wall. Current methods to analyze the lignin structure focus only on the frequency of the major monomeric units and interunit linkage types but do not provide information on the presence of less abundant unknown units and linkage types, nor on how linkages affect the formation of neighboring linkages. Such information can only be obtained using a sequencing approach. Here, we describe, to our knowledge for the first time, a sequencing strategy for lignin oligomers using mass spectrometry. This strategy was then evaluated on the oligomers extracted from wild-type poplar (Populus tremula × Populus tremuloides) xylem. In total, 134 lignin trimers to hexamers were observed, of which 36 could be completely sequenced. Interestingly, based on molecular mass data of the unknown monomeric and dimeric substructures, at least 10 unknown monomeric units or interunit linkage types were observed, one of which was identified as an arylglycerol end unit.

The role of the secondary cell wall in plant resistance to pathogens

Plant resistance to pathogens relies on a complex network of constitutive and inducible defensive barriers. The plant cell wall is one of the barriers that pathogens need to overcome to successfully colonize plant tissues. The traditional view of the plant cell wall as a passive barrier has evolved to a concept that considers the wall as a dynamic structure that regulates both constitutive and inducible defense mechanisms, and as a source of signaling molecules that trigger immune responses. The secondary cell walls of plants also represent a carbon-neutral feedstock (lignocellulosic biomass) for the production of biofuels and biomaterials. Therefore, engineering plants with improved secondary cell wall characteristics is an interesting strategy to ease the processing of lignocellulosic biomass in the biorefinery. However, modification of the integrity of the cell wall by impairment of proteins required for its biosynthesis or remodeling may impact the plants resistance to pathogens. This review summarizes our understanding of the role of the plant cell wall in pathogen resistance with a focus on the contribution of lignin to this biological process.

Engineering traditional monolignols out of lignin by concomitant up-regulation of F5H1 and down-regulation of COMT in Arabidopsis

Lignin engineering is a promising strategy to optimize lignocellulosic plant biomass for use as a renewable feedstock for agro-industrial applications. Current efforts focus on engineering lignin with monomers that are not normally incorporated into wild-type lignins. Here we describe an Arabidopsis line in which the lignin is derived to a major extent from a non-traditional monomer. The combination of mutation in the gene encoding caffeic acid O-methyltransferase (comt) with over-expression of ferulate 5-hydroxylase under the control of the cinnamate 4-hydroxylase promoter (C4H:F5H1) resulted in plants with a unique lignin comprising almost 92% benzodioxane units. In addition to biosynthesis of this particular lignin, the comt C4H:F5H1 plants revealed massive shifts in phenolic metabolism compared to the wild type. The structures of 38 metabolites that accumulated in comt C4H:F51 plants were resolved by mass spectral analyses, and were shown to derive from 5-hydroxy-substituted phenylpropanoids. These metabolites probably originate from passive metabolism via existing biochemical routes normally used for 5-methoxylated and 5-unsubstituted phenylpropanoids and from active detoxification by hexosylation. Transcripts of the phenylpropanoid biosynthesis pathway were highly up-regulated in comt C4H:F5H1 plants, indicating feedback regulation within the pathway. To investigate the role of flavonoids in the abnormal growth of comt C4H:F5H1 plants, a mutation in a gene encoding chalcone synthase (chs) was crossed in. The resulting comt C4H:F5H1 chs plants showed partial restoration of growth. However, a causal connection between flavonoid deficiency and this restoration of growth was not demonstrated; instead, genetic interactions between phenylpropanoid and flavonoid biosynthesis could explain the partial restoration. These genetic interactions must be taken into account in future cell-wall engineering strategies.

Mass spectrometry-based fragmentation as an identification tool in lignomics

The ensemble of all phenolics for which the biosynthesis is coregulated with lignin biosynthesis, i.e., metabolites from the general phenylpropanoid, monolignol, and (neo)lignan biosynthetic pathways and their derivatives, as well as the lignin oligomers, is coined the lignome. In lignifying tissues, the lignome comprises a significant portion of the metabolome. However, as is true for metabolomics in general, the structural elucidation of unknowns represents the biggest challenge in characterizing the lignome. To minimize the necessity to purify unknowns for NMR analysis, it would be desirable to be able to extract structural information from liquid chromatography-mass spectrometry data directly. However, mass spectral libraries for metabolomics are scarce, and no libraries exist for the lignome. Therefore, elucidating the gas-phase fragmentation behavior of the major bonding types encountered in lignome-associated molecules would considerably advance the systematic characterization of the lignome. By comparative MS(n) analysis of a series of molecules belonging to the β-aryl ether, benzodioxane, phenylcoumaran, and resinol groups, we succeeded in annotating typical fragmentations for each of these bonding structures as well as fragmentations that enabled the identification of the aromatic units involved in each bonding structure. Consequently, this work lays the foundation for a detailed characterization of the lignome in different plant species, mutants, and transgenics and for the MS-based sequencing of lignin oligomers and (neo)lignans.