Ruotian Chen

Direct Imaging of Highly Anisotropic Photogenerated Charge Separations on Different Facets of a Single BiVO4 Photocatalyst

Spatially resolved surface photovoltage spectroscopy (SRSPS) was employed to obtain direct evidence for highly anisotropic photogenerated charge separation on different facets of a single BiVO4 photocatalyst. Through the controlled synthesis of a single crystal with preferentially exposed {010} facets, highly anisotropic photogenerated hole transfer to the {011} facet of single BiVO4 crystals was observed. The surface photovoltage signal intensity on the {011} facet was 70 times stronger than that on the {010} facets. The influence of the built-in electric field in the space charge region of different facets on the anisotropic photoinduced charge transfer in a single semiconductor crystal is revealed.

Enhancing charge separation on high symmetry SrTiO3 exposed with anisotropic facets for photocatalytic water splitting

One of the challenging issues in photocatalytic overall water splitting is to efficiently separate the photogenerated charges and the reduction and oxidation catalytic sites on semiconductor-based photocatalysts. It has been reported that the photogenerated charge can be separated between different facets of a semiconductor crystal with low symmetry. However, many semiconductor crystals possess high symmetry (such as the cubic phase) and expose isotropic facets, which are not suitable for charge separation between the facets. Herein, using a nanocrystal morphology tailoring strategy, we synthesized the exposed facets of high symmetry SrTiO3 nanocrystals from isotropic facets (6-facet SrTiO3) to anisotropic facets (18-facet SrTiO3), which leads to the exposure of different crystal facets. We found that the reduction and oxidation catalytic sites can be separately distributed only on the anisotropic facets of 18-facet SrTiO3 nanocrystals, but randomly distributed on every facet of 6-facet SrTiO3 nanocrystals. Based on these findings, the selective distribution of dual-cocatalysts on the anisotropic facets of 18-facet SrTiO3 nanocrystals leads to a fivefold enhancement of apparent quantum efficiency. The superior performance can be attributed to the charge separation between anisotropic facets and the separation of the reduction and oxidation catalytic sites to reduce the charge recombination. These findings will be instructive for the rational design of a high efficiency photocatalytic system for solar energy conversion.

Manipulating the Interfacial Energetics of n-type Silicon Photoanode for Efficient Water Oxidation

The photoanodes with heterojunction behavior could enable the development of solar energy conversion, but their performance largely suffers from the poor charge separation and transport process through the multiple interfacial energy levels involved. The question is how to efficiently manipulate these energy levels. Taking the n-Si Schottky photoanode as a prototype, the undesired donor-like interfacial defects and its adverse effects on charge transfer in n-Si/ITO photoanode are well recognized and diminished through the treatment on electronic energy level. The obtained n-Si/TiOx/ITO Schottky junction exhibits a highly efficient charge transport and a barrier height of 0.95 eV, which is close to the theoretical optimum for n-Si/ITO Schottky contact. Then, the holes extraction can be further facilitated through the variation of surface energy level, with the NiOOH coated ITO layer. This is confirmed by a 115% increase in surface photovoltage of the photoanodes. Eventually, an unprecedentedly low onset potential of 0.9 V (vs RHE) is realized for water oxidation among n-Si photoanodes. For the water oxidation reaction, the n-Si/TiOx/ITO/NiOOH photoanode presents a charge separation efficiency up to 100% and an injection efficiency greater than 90% at a wide voltage range. This work identifies the important role of interfacial energetics played in photoelectrochemical conversion.

Synergetic Effect of Dual Co‐catalysts on the Activity of p‐Type Cu2O Crystals with Anisotropic Facets

Spatial separation of reduction sites and oxidation sites to inhibit the recombination of photogenerated electrons and holes plays a vital role in improving the efficiency of photocatalyst systems. It is very challenging to rationally deposit cocatalysts on the right facets (sites), namely, the reduction cocatalyst on the reduction facets (sites) and the oxidation cocatalyst on the oxidation facets (sites). Herein, we report that the reduction and oxidation cocatalysts can be selectively constructed on the different facets of p-type Cu2 O crystals with anisotropic facets, but not on the Cu2 O crystal with isotropic facets. The deposition of dual cocatalysts on the different facets resulted in a remarkable synergetic effect in the photocatalytic performance, which could be attributed to the spatial separation of the photogenerated charges between facets. Our work reports an instructive strategy for constructing high-efficiency photocatalyst systems for solar energy conversion.

Directly Probing Charge Separation at Interface of TiO2 Phase Junction

Phase junction is often recognized as an effective strategy to achieve efficient charge separation in photocatalysis and photochemistry. As a crucial factor to determine the photogenerated charges dynamics, there is an increasingly hot debate about the energy band alignment across the interface of phase junction. Herein, we reported the direct measurement of the surface potential profile over the interface of TiO2 phase junction. A built-in electric field up to 1 kV/cm from rutile to anatase nanoparticle was detected by Kelvin Probe Force Microscopy (KPFM). Home-built spatially resolved surface photovoltage spectroscopy (SRSPS) supplies a direct evidence for the vectorial charge transfer of photogenerated electrons from rutile to anatase. Moreover, the tunable anatase nanoparticle sizes in TiO2 phase junction leads to high surface photovoltage (SPV) by creating completely depleted space charge region (SCR) and enhancing the charge separation efficiency. The results provide a strong basis for understanding the impact of built-in electric field on the charge transfer across the interface of artificial photocatalysts.

Mimicking the Key Functions of Photosystem II in Artificial Photosynthesis for Photoelectrocatalytic Water Splitting

It has been anticipated that learning from nature photosynthesis is a rational and effective way to develop artificial photosynthesis system, but it is still a great challenge. Here, we assembled a photoelectrocatalytic system by mimicking the functions of photosystem II (PSII) with BiVO4 semiconductor as a light harvester protected by a layered double hydroxide (NiFeLDH) as a hole storage layer, a partially oxidized graphene (pGO) as biomimetic tyrosine for charge transfer, and molecular Co cubane as oxygen evolution complex. The integrated system exhibited an unprecedentedly low onset potential (0.17 V) and a high photocurrent (4.45 mA cm-2), with a 2.0% solar to hydrogen efficiency. Spectroscopic studies revealed that this photoelectrocatalytic system exhibited superiority in charge separation and transfer by benefiting from mimicking the key functions of PSII. The success of the biomimetic strategy opened up new ways for the rational design and assembly of artificial photosynthesis systems for efficient solar-to-fuel conversion.

Visualizing the Nano Cocatalyst Aligned Electric Fields on Single Photocatalyst Particles

The cocatalysts or dual cocatalysts of photocatalysts are indispensable for high efficiency in artificial photosynthesis for solar fuel production. However, the reaction activity increased by cocatalysts cannot be directly ascribed to the accelerated catalytic kinetics, since photogenerated charges are involved in the elementary steps of photocatalytic reactions. To date, diverging views about cocatalysts show that their exact role for photocatalysis is not well understood yet. Herein, we image directly the local separation of photogenerated charge carriers across single crystals of the BiVO4 photocatalyst which loaded locally with nanoparticles of a MnOx single cocatalyst or with nanoparticles of a spatially separated MnOx and Pt dual cocatalyst. The deposition of the single cocatalyst resulted not only in a strong increase of the interfacial charge transfer but also, surprisingly, in a change of the direction of built-in electric fields beneath the uncovered surface of the photocatalyst. The additive electric fields caused a strong increase of local surface photovoltage signals (up to 80 times) and correlated with the increase of the photocatalytic performance. The local electric fields were further increased (up to 2.5 kV·cm-1) by a synergetic effect of the spatially separated dual cocatalysts. The results reveal that cocatalyst has a conclusive effect on charge separation in photocatalyst particle by aligning the vectors of built-in electric fields in the photocatalyst particle. This effect is beyond its catalytic function in thermal catalysis.

Influence of the Electrostatic Interaction between a Molecular Catalyst and Semiconductor on Photocatalytic Hydrogen Evolution Activity in Cobaloxime/CdS Hybrid Systems

The influence of the electrostatic interaction on photocatalytic H2 evolution activity in cobaloxime/cadmium sulfide (CdS) hybrid systems was studied by measuring the charges of the cobaloximes and the zeta potentials of CdS under different pH conditions (pHs 4-7). Cobaloxime/CdS hybrid systems may have potential as a valid model for the investigation of the electrostatic interaction between a molecular catalyst and semiconductor because the kinetics of methanol oxidation and the driving force of electron transfer from photoirradiated CdS to cobaloxime have little effect on the pH-dependent photocatalytic H2 evolution activity. Our experimental results suggest that electrostatic repulsion between cobaloxime and CdS disfavors the electron transfer from CdS to cobaloxime and hence lowers the photocatalytic H2 evolution activity. Whereas, electrostatic attraction favors the electron transfer process and enhances the photocatalytic H2 evolution activity. However, an electrostatic attraction interaction that is too strong may accelerate both forward and backward electron transfer processes, which would reduce charge separation efficiency and lower photocatalytic H2 evolution activity.

Dual Extraction of Photogenerated Electrons and Holes from a Ferroelectric Sr0.5Ba0.5Nb2O6 Semiconductor.

The separation of photogenerated charges is a critical factor in photocatalysis. Recently, anomalous photovoltaic (APV) field effects (Voc ∼ 10(3) V/cm) in ferroelectrics, with their strong driving force for charge separation, have attracted much attention in photocatalysis and photoelectrocatalysis. However, it is still unknown whether photogenerated electrons and holes can be simultaneously extracted by the strong driving force toward the surface of ferroelectrics and can become available for surface reactions. This issue becomes critically important in photocatalysis because the surface reaction utilizes both the electrons and holes that reach the surface. In this work, a model lateral symmetric structure, metal/Sr0.5Ba0.5Nb2O6/metal (metal = Ag or Pt), as an electrode was fabricated. The dual extractions of photogenerated electrons and holes on the two opposite metal electrodes were achieved, as revealed by photovoltaic and ferroelectrical hysteresis measurements and photoassisted Kelvin probe force microscopy (KPFM). It was found that the high Schottky barriers of the two opposite Sr0.5Ba0.5Nb2O6-Pt electrodes are key factors that alter the two space charge regions (SCRs) by a poling effect. The resulting built-in electrical fields with parallel directions near both electrodes significantly enhance the charge separation ability. Our model unravels the driving force of charge separation in ferroelectric semiconductors, thus demonstrating the potential for highly efficient charge separation in photocatalysis.