Rusen Zhou

Effects of Atmospheric-Pressure N2, He, Air, and O2 Microplasmas on Mung Bean Seed Germination and Seedling Growth.

Atmospheric-pressure N2, He, air, and O2 microplasma arrays have been used to investigate the effects of plasma treatment on seed germination and seedling growth of mung bean in aqueous solution. Seed germination and growth of mung bean were found to strongly depend on the feed gases used to generate plasma and plasma treatment time. Compared to the treatment with atmospheric-pressure O2, N2 and He microplasma arrays, treatment with air microplasma arrays was shown to be more efficient in improving both the seed germination rate and seedling growth, the effect attributed to solution acidification and interactions with plasma-generated reactive oxygen and nitrogen species. Acidic environment caused by air discharge in water may promote leathering of seed chaps, thus enhancing the germination rate of mung bean, and stimulating the growth of hypocotyl and radicle. The interactions between plasma-generated reactive species, such as hydrogen peroxide (H2O2) and nitrogen compounds, and seeds led to a significant acceleration of seed germination and an increase in seedling length of mung bean. Electrolyte leakage rate of mung bean seeds soaked in solution activated using air microplasma was the lowest, while the catalase activity of thus-treated mung bean seeds was the highest compared to other types of microplasma.

Interaction of Atmospheric-Pressure Air Microplasmas with Amino Acids as Fundamental Processes in Aqueous Solution

Plasma medicine is a relatively new field that investigates potential applications of cold atmospheric-pressure plasmas in bioengineering, such as for bacterial inactivation and degradation of organic molecules in water. In order to enunciate mechanisms of bacterial inactivation at molecular or atomic levels, we investigated the interaction of atmospheric-pressure air microplasmas with amino acids in aqueous solution by using high-resolution mass spectrometry (HRMS). Results show that the oxidation effect of plasma-induced species on the side chains of the amino acids can be categorized into four types, namely hydroxylation, nitration, dehydrogenation and dimerization. In addition, relative activities of amino acids resulting from plasma treatment come in descending order as follows: sulfur-containing carbon-chain amino acids > aromatic amino acids > five-membered ring amino acids > basic carbon-chain amino acids. Since amino acids are building blocks of proteins vital to the growth and reproduction of bacteria, these results provide an insight into the mechanism of bacterial inactivation by plasma.

Synergistic Effect of Atmospheric-pressure Plasma and TiO2 Photocatalysis on Inactivation of Escherichia coli Cells in Aqueous Media.

Atmospheric-pressure plasma and TiO2 photocatalysis have been widely investigated separately for the management and reduction of microorganisms in aqueous solutions. In this paper, the two methods were combined in order to achieve a more profound understanding of their interactions in disinfection of water contaminated by Escherichia coli. Under water discharges carried out by microplasma jet arrays can result in a rapid inactivation of E. coli cells. The inactivation efficiency is largely dependent on the feed gases used, the plasma treatment time, and the discharge power. Compared to atmospheric-pressure N2, He and air microplasma arrays, O2 microplasma had the highest activity against E. coli cells in aqueous solution, and showed >99.9% bacterial inactivation efficiency within 4 min. Addition of TiO2 photocatalytic film to the plasma discharge reactor significantly enhanced the inactivation efficiency of the O2 microplasma system, decreasing the time required to achieve 99.9% killing of E. coli cells to 1 min. This may be attributed to the enhancement of ROS generation due to high catalytic activity and stability of the TiO2 photocatalyst in the combined plasma-TiO2 systems. Present work demonstrated the synergistic effect of the two agents, which can be correlated in order to maximize treatment efficiency.

Surface diffuse discharge mechanism of well-aligned atmospheric pressure microplasma arrays*

A stable and homogeneous well-aligned air microplasma device for application at atmospheric pressure is designed and its electrical and optical characteristics are investigated. Current-voltage measurements and intensified charge coupled device (ICCD) images show that the well-aligned air microplasma device is able to generate a large-area and homogeneous discharge at the applied voltages ranging from 12 kV to 14 kV, with a repetition frequency of 5 kHz, which is attributed to the diffusion effect of plasma on dielectric surface. Moreover, this well-aligned microplasma device may result in the uniform and large-area surface modification of heat-sensitive PET polymers without damage, such as optimization in hydrophobicity and biocompatibility. In the biomedical field, the utility of this well-aligned microplasma device is further testified. It proves to be very efficient for the large-area and uniform inactivation of E. coli cells with a density of 10 3 /cm 2 on LB agar plate culture medium, and inactivation efficiency can reach up to 99 for 2-min treatment.

Fast liquefaction of bamboo shoot shell with liquid-phase microplasma assisted technology

In this study, liquid-phase microplasma technology (LPMPT) was employed to facilitate the liquefaction of bamboo shoot shell (BSS) in polyethylene glycol 400 (PEG 400) and ethylene glycol (EG) mixture. Effects of liquefaction conditions such as liquefaction time, catalyst percentage, solvent/BSS mass ratio, PEG/EG volume ratio on liquefaction were investigated experimentally. The results showed that the introduction of LPMPT significantly shortened the liquefaction time to 3min without extra heating. The liquefaction yield reached 96.73% under the optimal conditions. The formation of massive reactive species and instantaneous heat accumulation both contributed to the rapid liquefaction of BSS. Thus, LPMPT could be considered as a simple and efficient method for the assistance of biomass fast liquefaction.

Mechanism and optimization for plasma electrolytic liquefaction of sawdust

In this work, plasma electrolytic technology was successfully employed to achieve fast liquefaction of sawdust when polyethylene glycol 200 (PEG 200) and glycerol were used as liquefacient in the presence of the catalyst sulfuric acid. Results showed that H ions could heat the solution effectively during the plasma electrolytic liquefaction (PEL) process. The influence of some key parameters including liquefaction time, catalyst percentage, liquefacient/sawdust mass ratio, and PEG 200/glycerol molar ratio on the liquefaction yield were investigated. Based on the results of single factor experiments, response surface methodology (RSM) was applied to optimize the liquefaction process. Under the optimal conditions that is liquefaction time of 5.10min, catalyst percentage of 1.05%, liquefacient/sawdust mass ratio of 7.12/1 and PEG 200/glycerol molar ratio of 1.40/1, the liquefaction yield reached 99.48%. Hence, it could be concluded that PEL has good application potential for biomass fast liquefaction.

Improved fermentation efficiency of S . cerevisiae by changing glycolytic metabolic pathways with plasma agitation

Production of ethanol by the yeast Saccharomyces cerevisiae is a process of global importance. In these processes, productivities and yields are pushed to their maximum possible values leading to cellular stress. Transient and lasting enhancements in tolerance and performance have been obtained by genetic engineering, forced evolution, and exposure to moderate levels of chemical and/or physical stimuli, yet the drawbacks of these methods include cost, and multi-step, complex and lengthy treatment protocols. Here, plasma agitation is shown to rapidly induce desirable phenotypic changes in S. cerevisiae after a single treatment, resulting in improved conversion of glucose to ethanol. With a complex environment rich in energetic electrons, highly-reactive chemical species, photons, and gas flow effects, plasma treatment simultaneously mimics exposure to multiple environmental stressors. A single treatment of up to 10 minutes performed using an atmospheric pressure plasma jet was sufficient to induce changes in cell membrane structure, and increased hexokinase 2 activity and secondary metabolite production. These results suggest that plasma treatment is a promising strategy that can contribute to improving metabolic activity in industrial microbial strains, and thus the practicality and economics of industrial fermentations.

Cold atmospheric plasma activated water as a prospective disinfectant: the crucial role of peroxynitrite

The socio-economic, environmental, and health implications of diseases caused by pathogenic microorganisms and their treatment using conventional antimicrobials are significant. The increasing resistance to antibiotics and detrimental biological side effects of many common antibiotics on human health and on the ecosystem have driven the search for new cost-effective and highly-efficient sterilization treatments and agents that are more environmentally benign. Plasma activated water (PAW), a product of cold atmospheric plasma reacting with water, is a promising broad-spectrum biocidal agent whose biochemical activity is attributed to the presence of a rich diversity of highly reactive oxygen and nitrogen species (RONS). The transient activity of PAW, where PAW reverts to water within days of storage and application, suggests that it can become a green alternative to conventional chemical treatment methods, yet the issues of scale up and the not fully understood mechanism of activity remain. In this study, we sought to explore the antibiotic potential of PAW generated from a plasma jet in a continuous flow reactor and determine the individual and combined contribution of thus-generated reactive chemistries in PAW for organism inactivation. Treatment of Escherichia coli with PAW led to more than a 4-log reduction, while exposure to an equivalent single dose of hydrogen peroxide (H2O2), nitrate (NO3−) or nitrite (NO2−) to that found in PAW failed to attain the same level of reduction. Peroxynitrite was identified as a critical bioactive species, particularly under acidic conditions, originating from the synergistic plasma effects (like the reactions of H2O2, NO3−, NO2− and other existing short-lived species like OH radicals in PAW). This research successfully demonstrated the possibility of PAW being an effective environmentally benign disinfectant, the activity of which is closely linked to the generation of peroxynitrite, providing much needed insights into the fundamental aspects of PAW chemistry required for optimisation of the biochemical activity of PAW and translation of this decontamination strategy into real life applications.