Rutger Matthes

Antimicrobial efficacy of non‐thermal plasma in comparison to chlorhexidine against dental biofilms on titanium discs in vitro – proof of principle experiment

AIM Dental biofilms play a major role in the pathogenesis of peri-implant mucositis. Biofilm reduction is a pre-requisite for a successful therapy of peri-implant mucosal lesions. In this study, we evaluated the effect of three different plasma devices on the reduction of Streptococcus mutans (S. mutans) and multispecies human saliva biofilms. MATERIAL AND METHODS We assessed the efficacy of three different non-thermal atmospheric pressure plasma devices against biofilms of S. mutans and saliva multispecies grown on titanium discs in vitro in comparison with a chlorhexidine digluconate (CHX) rinse. Efficacy of plasma treatment was determined by the number of colony forming units (CFU) and by scanning electron microscopy. The results were reported as reduction of CFU (CFU(untreated) -CFU(treated) ). RESULTS The application of plasma was much more effective than CHX against biofilms. The maximum reduction of CHX was 3.36 for S. mutans biofilm and 1.50 for saliva biofilm, whereas the colony forming units (CFU) reduction of the volume dielectric barrier discharge argon plasma was 5.38 for S. mutans biofilm and 5.67 for saliva biofilm. CONCLUSIONS Treatment of single- and multispecies dental biofilms on titanium discs with non-thermal atmospheric pressure plasma was more efficient than CHX application in vitro. Thus, the development of plasma devices for the treatment of peri-implant mucositis may be fruitful.

Efficacy of chlorhexidine, polihexanide and tissue-tolerable plasma against Pseudomonas aeruginosa biofilms grown on polystyrene and silicone materials.

Background: The formation of biofilms is crucial in the pathogenesis of many acute and subacute microbial infections, including chronic wounds and foreign-body-related infections. Topical antimicrobial therapy with chemical antiseptics or physical treatment with tissue-tolerable plasma (TTP) may be promising to control bacterial infection. Methods: We assessed the efficacy of 0.1% chlorhexidine digluconate (CHX), 0.02 and 0.04% polihexanide (polyhexamethylene biguanide, PHMB) and of TTP against Pseudomonas aeruginosa SG81 biofilm grown in microtitre plates (polystyrene) and on silicone materials in an artificial wound fluid. Results: Overall, PHMB was as effective as CHX in reducing the total amount of biofilm (gentian violet assay) and in reducing the bacterial metabolism in biofilms (XTT assay). TTP also led to a significant reduction in colony-forming units. Conclusion: The antimicrobial activity of PHMB in biofilms is comparable to that of CHX. TTP could become an interesting physical alternative to chemical antisepsis in the future.

Antimicrobial efficacy of two surface barrier discharges with air plasma against in vitro biofilms.

The treatment of infected wounds is one possible therapeutic aspect of plasma medicine. Chronic wounds are often associated with microbial biofilms which limit the efficacy of antiseptics. The present study investigates two different surface barrier discharges with air plasma to compare their efficacy against microbial biofilms with chlorhexidine digluconate solution (CHX) as representative of an important antibiofilm antiseptic. Pseudomonas aeruginosa SG81 and Staphylococcus epidermidis RP62A were cultivated on polycarbonate discs. The biofilms were treated for 30, 60, 150, 300 or 600 s with plasma or for 600 s with 0.1% CHX, respectively. After treatment, biofilms were dispensed by ultrasound and the antimicrobial effects were determined as difference in the number of the colony forming units by microbial culture. A high antimicrobial efficacy on biofilms of both plasma sources in comparison to CHX treatment was shown. The efficacy differs between the used strains and plasma sources. For illustration, the biofilms were examined under a scanning electron microscope before and after treatment. Additionally, cytotoxicity was determined by the MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay with L929 mouse fibroblast cell line. The cell toxicity of the used plasma limits its applicability on human tissue to maximally 150 s. The emitted UV irradiance was measured to estimate whether UV could limit the application on human tissue at the given parameters. It was found that the UV emission is negligibly low. In conclusion, the results support the assumption that air plasma could be an option for therapy of chronic wounds.

Cold atmospheric plasma in combination with mechanical treatment improves osteoblast growth on biofilm covered titanium discs

Treatment of implants with peri-implantitis is often unsuccessful, because an instrumented implant surface and residual microbial biofilm impedes re-osseointegration. The application of cold atmospheric plasma (CAP) could be a simple and effective strategy to overcome the inherent problems of peri-implantitis treatment. CAP is able to destroy and eliminate bacterial biofilms. Additionally, it increases the wettability of titanium, which supports cellular attachment. In this study, the behaviour of osteoblasts on titanium discs was analysed after treatment of bacterial biofilms with CAP, brushing, or a combination of both. A human plaque biofilm was cultured on titanium discs. Treatment with a brush (BR), 1% oxygen/argon CAP (PL), or brushing combined with CAP (BR+PL) was used to eliminate the biofilm. Discs without biofilm (C), autoclaved biofilm (AUTO) and untreated biofilm (BIO) served as controls. Subsequently, human osteoblastic cell growth (MG-63) was observed after 1 and 24 h. Biofilm remnants on BR and PL impaired osteoblastic cell development, whereas the BR+PL provided an increased area of osteoblastic cells. A five-day cell growth was only detectable on BR+PL treated discs. The combination of established brushing and CAP application may be a promising strategy to treat peri-implantitis.

Pilot-study on the influence of carrier gas and plasma application (open resp. delimited) modifications on physical plasma and its antimicrobial effect against Pseudomonas aeruginosa and Staphylococcus aureus.

Introduction: Physical plasma is a promising new technology regarding its antimicrobial effects. This is especially accounting for treatment of bacterial infection of chronic wounds. Plasma can be generated with different carrier gases causing various biological effects. Screening of different carrier gases and plasma generation setups is therefore needed to find suitable compositions for highly effective antimicrobial plasma treatments and other applications. Method: The plasma source used was a radio-frequency plasma jet which generates tissue tolerable plasma (TTP). The study compared the antimicrobial efficacy of air, argon, or helium plasma alone or admixed with 0.1%, 0.5%, and 1% oxygen against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus). Treatment took place in an environmentally open and delimited system. Therefore, bacteria were plated on agar and treated with plasma in a punctiform manner. The resulting inhibition zones were measured and the reduction factors were calculated by colony counting, respectively. Results: For S. aureus and P. aeruginosa, inhibition zones and overall reduction of colony forming units (CFU) on the agar plate were observed while an accumulative reduction of CFU dominated for S. aureus. The highest antimicrobial effect was shown in form of an inhibition zone for argon plasma with 0.1% oxygen admixture for both species. S. aureus was more sensitive for helium plasma with >0.1% oxygen admixture compared to P. aeruginosa which in turn was more sensitive for argon plasma with and without oxygen. The efficacy of air plasma was very low in comparison to the other gases. The treatment in a closed system predominantly enhanced the antimicrobial effect. The effect intensity varied for each treatment time and gas mixtures. Discussion: As expected, the antimicrobial effect mostly increased when increasing oxygen admixture to the carrier gases. The variation in bacterial growth and inhibition after exposure to different plasma gas compositions could be due to a varying generation of reactive oxygen species or radiation. Conclusion: The applied plasma in a “closed system” accumulates bactericidal plasma species and might increase antimicrobial efficacy in clinical settings as in wound management involving multi-drug resistant bacteria.

Synergistic Effects of Nonthermal Plasma and Disinfecting Agents against Dental Biofilms In Vitro

Aim. Dental biofilms play a major role in the pathogenesis of many dental diseases. In this study, we evaluated the synergistic effect of atmospheric pressure plasma and different agents in dentistry on the reduction of biofilms. Methods and Results. We used monospecies (S. mutans) and multispecies dental biofilm models grown on titanium discs in vitro. After treatment with one of the agents, the biofilms were treated with plasma. Efficacy of treatment was determined by the number of colony forming units (CFU) and by live-dead staining. For S. mutans biofilms no colonies could be detected after treatment with NaOCl or H2O2. For multispecies biofilms the combination with plasma achieved a higher CFU reduction than each agent alone. We found an additive antimicrobial effect between argon plasma and agents irrespective of the treatment order with cultivation technique. For EDTA and octenidine, antimicrobial efficacy assessed by live-dead staining differed significantly between the two treatment orders (P < 0.05). Conclusions. The effective treatment of dental biofilms on titanium discs with atmospheric pressure plasma could be increased by adding agents in vitro.

A three-phase in-vitro system for studying Pseudomonas aeruginosa adhesion and biofilm formation upon hydrogel contact lenses

BackgroundPseudomonas aeruginosa is commonly associated with contact lens (CL) -related eye infections, for which bacterial adhesion and biofilm formation upon hydrogel CLs is a specific risk factor. Whilst P. aeruginosa has been widely used as a model organism for initial biofilm formation on CLs, in-vitro models that closely reproduce in-vivo conditions have rarely been presented.ResultsIn the current investigation, a novel in-vitro biofilm model for studying the adherence of P. aeruginosa to hydrogel CLs was established. Nutritional and interfacial conditions similar to those in the eye of a CL wearer were created through the involvement of a solid:liquid and a solid:air interface, shear forces and a complex artificial tear fluid. Bioburdens varied depending on the CL material and biofilm maturation occurred after 72 h incubation. Whilst a range of biofilm morphologies were visualised including dispersed and adherent bacterial cells, aggregates and colonies embedded in extracellular polymer substances (EPS), EPS fibres, mushroom-like formations, and crystalline structures, a compact and heterogeneous biofilm morphology predominated on all CL materials.ConclusionsIn order to better understand the process of biofilm formation on CLs and to test the efficacy of CL care solutions, representative in-vitro biofilm models are required. Here, we present a three-phase biofilm model that simulates the environment in the eye of a CL wearer and thus generates biofilms which resemble those commonly observed in-situ.

Repeated applications of cold atmospheric pressure plasma does not induce resistance in Staphylococcus aureus embedded in biofilms.

Introduction: The increasing microbial resistance against antibiotics complicates the therapy of bacterial infections. Therefore new therapeutic options, particularly those causing no resistance, are of high interest. Cold atmospheric plasma is one possible option to eradicate multidrug resistant microorganisms, and so far no resistance development against physical plasma is known. Method: We tested 6-fold repeated plasma applications on a Staphylococcus aureus strain embedded in biofilm and compared the reduction of the colony forming units between the different treatment periods to asses a possible development of resistance. Result: For all treatment periods, the control biofilms were reduced by plasma in average by 1.7 log10 CFU, and decreased from 7.6 to 5.8 log10 (CFU/cm2) within 5 hours. The results demonstrated that repeated plasma doses not induce resistance or habituation against plasma applied within short time periods. Conclusion: The repeated application of cold plasma is a promising option for the treatment of infected wounds without the risk of development of resistance against plasma.

In vitro efficacy of cold atmospheric pressure plasma on S. sanguinis biofilms in comparison of two test models

Dental plaque critically affects the etiology of caries, periodontitis and periimplantitis. The mechanical removal of plaque can only be performed partially due to limited accessibility. Therefore, plaque still represents one of the major therapeutic challenges. Even though antiseptic mouth rinses reduce the extent of biofilm temporarily, plaque removal remains incomplete and continuous usage can even result in side effects. Here we tested argon plasma produced by kinpen09 as one option to inactivate microorganisms and to eliminate plaque. S. sanguinis biofilms cultivated in either the European Biofilm Reactor (EUREBI) or in 24 well plates were treated with argon plasma. In both test systems a homogeneous, good analyzable and stable biofilm was produced on the surface of titan plates within 72 h (>6,9 log10 CFU/ml). Despite the significantly more powerful biofilm production in EUREBI, the difference of 0.4 log10 CFU/ml between EUREBI and the 24 well plates was practically not relevant. For that reason both test models were equally qualified for the analysis of efficacy of cold atmospheric pressure plasma. We demonstrate a significant reduction of the biofilm compared to the control in both test models. After plasma application of 180 s the biofilm produced in EUREBI or in 24 well plates was decreased by 0.6 log10 CFU/ml or 0.5 log10 CFU/ml, respectively. In comparison to recently published studies analyzing the efficacy of kinpen09, S. sanguinis produces a hardly removable biofilm. Future investigations using reduced distances between plasma source and biofilm, various compositions of plasma and alternative plasma sources will contribute to further optimization of the efficacy against S. sanguinis biofilms.

Efficacy of different carrier gases for barrier discharge plasma generation compared to chlorhexidine on the survival of Pseudomonas aeruginosa embedded in biofilm in vitro.

Because of its antimicrobial properties, nonthermal plasma could serve as an alternative to chemical antisepsis in wound treatment. Therefore, this study investigated the inactivation of biofilm-embedded Pseudomonas aeruginosa SG81 by a surface barrier-discharged (SBD) plasma for 30, 60, 150 and 300 s. In order to optimize the efficacy of the plasma, different carrier gases (argon, argon admixed with 1% oxygen, and argon with increased humidity up to approx. 80%) were tested and compared against 0.1% chlorhexidine digluconate (CHG) exposure for 600 s. The antimicrobial efficacy was determined by calculating the difference between the numbers of colony-forming units (CFU) of treated and untreated biofilms. Living bacteria were distinguished from dead by fluorescent staining and confocal laser scanning microscopy. Both SBD plasmas and CHG showed significant antimicrobial effects compared to the untreated control. However, plasma treatment led to a higher antimicrobial reduction (argon plasma 4.9 log10 CFU/cm2, argon with admixed oxygen 3 log10 CFU/cm2, and with increased gas humidity 2.7 log10 CFU/cm2 after 300 s) compared to CHG. In conclusion, SBD plasma is suitable as an alternative to CHG for inactivation of Pseudomonas aeruginosa embedded in biofilm. Further development of SBD plasma sources and research on the role of carrier gases and humidity may allow their clinical application for wound management in the future.